该模型将温度场和应力场的计算相互耦合，交替进行。
The computation of temperature filed is coupled with that of stress field in this model.
对正交接管焊接接头的温度场和应力场进行了数值模拟。
Temperature and stress fields of multi-pass welding of orthogonal nozzles were simulated.
对铍环激光束钎焊过程的温度场和应力场进行了有限元模拟。
The temperature and stress fields of a ring structure laser welding are simulated by finite element method (FEM).
计算了薄膜在高功率脉冲激光作用下截面温度场和应力场分布。
The sectional temperature and stress diStribution of optical films under high power PUlse laser irradiation are calculated.
获得了焊接温度场和应力场的动态变化过程，并分析了计算结果。
Temperature distribution and stress variation of welding are achieved and the results are discussed properly.
本文运用有限单元法，对钢包底的温度场和应力场进行了数值模拟。
In this paper, temperature and stress field on the bottom had been simulated using finite element method.
所得结果可用于转子的动态温度场和应力场计算以及疲劳寿命预测。
The results presented here in can be used to predict transient temperature field, transient stress field, and fatigue lifetime of the steam turbine rotor.
通过计算温度场和应力场，分析了喷管在发动机工作过程中的结构完整性。
Structure integrality of nozzle during the working process of motor was analyzed by calculating temperature field and stress field.
采用MARC软件对铍环激光束钎焊过程的温度场和应力场进行了有限元分析。
MARC software was used to simulate the temperature and stress fields of laser beam braze welding process of beryllium ring.
应用abaqus软件，对多道焊T形接头的温度场和应力场进行了数值模拟。
Temperature and stress distribution of multi-pass welded T-joint was simulated using ABAQUS codes. 3-d solid elements were used to mesh the model.
提出了一种以三维循环对称有限元模型计算制动过程中制动盘温度场和应力场的方法。
This paper proposes a method to calculate the transient temperature field and stress field of a working brake disc with 3 dimensional cycle symmetric model.
在钢高压气体淬火过程的计算模拟中，关键问题之一是温度场和应力场边界条件的确定。
The heat transfer coefficient of quenching medium, as a key parameter in the boundary condition of heat conduction equation, plays an important role in numerical simulation of steel quenching process.
基于三维循环对称有限元模型，提出了机车制动盘制动过程中温度场和应力场的计算方法。
The calculation method of transient temperature field and stress field of a new type brake disc is put forward on the basis of 3dimentional cycle-symmetric finite element model.
熔积成形的技术关键是成形性与热应力的控制，而这些与成形过程的温度场和应力场紧密相关。
The key of this technology is the formability and the control of the thermal stress. And these are associated with the temperature field and stress field.
本文提出以钢锭模一个使用周期的温度场和应力场的数值模拟结果为依据优化设计钢锭模的方法。
In this paper, the optimum designing method for dimension of ingot mould based on numerical simulation of temperature and thermal stress field in a cycle of use is proposed.
本文利用大型有限元模拟软件ANSYS对大高径比柱形挤压铸件的温度场和应力场进行了数值模拟。
In this article, the large FEM software, ANSYS, was employed to simulate the temperature field and the pressure field.
结合苏州轨道交通地下车站工程实例，对大体积混凝土施工期和运行期温度场和应力场进行仿真计算。
According to a construction case of substation in Suzhou, 3D numerical simulation of temperature and stress fields of massive concrete during the construction and operation stages is performed.
通过ANSYS有限元通用软件对125MW供热汽轮机高压内缸稳态、非稳态温度场和应力场进行了计算。
The thermal and stress, included steady and transient, were calculated for HP inside cylinder of 125MW cogeneration steam turbine with the help of ANSYS.
在总结前人经验的基础上，通过平板堆焊实例利用直接法同时计算焊接温度场和应力场，模拟出了焊接过程。
Based on summing up others' experience, this paper research the direct method to calculate and simulate the temperature and stress field at the same time through a board surfacing welding sample.
利用ANSYS有限元软件对超临界600MW机组的高、中压缸的一次完整启停过程进行温度场和应力场计算。
The thermal field and stress field were calculated for the HP and IP cylinder of 600 MW supercritical steam turbine in one integral star-stop process with the finite element software of ANSYS.
最后，以高脚杯形挤压铸件作为大高径比挤压铸件的实例，对其挤压铸造过程中的温度场和应力场进行了模拟和分析。
At last, as the example of squeeze casting with large ratio of height to diameter, the temperature field and stress field of high-leg casting were simulated and analyzed.
利用软件DEFORM 3d对金属切削过程中的切屑流动状态及过程中的温度场和应力场进行了模拟加工并分析了模拟结果。
The chip flowage, in the temperature fi eld and stress field in the process of metal cutting are simulated with the commercial software DEFORM3D and the simul...
当冻土墙中温度发生变化时产生变温应力，把变温应力作为一种等效荷载在本构方程中加以考虑，得到温度场和应力场耦合的有限元方程。
The changed temperature will lead to stress. The stress is considered in constitutive equations, and the coupled equations of temperature and stress fields are obtained.
本文根据瞬态温度场和应力场理论，建立地下室混凝土墙体的三维有限元分析模型，利用有限元分析程序ANSYS对基本工况下的墙体进行分析。
Based on the theory of the unsteady temperature field and stress field, three-dimensional finite element model is set up. The wall is analyzed by program of ANSYS finite element analysis.
并考虑混凝土的内外约束及混凝土的徐变变形，用有限元法求解混凝土不利面的温度应力，并用大型有限元软件ANSYS对温度场和应力场进行了模拟。
According to consideration of restriction and creep deform in mass concrete, the temperature field and thermal stress are simulated through the finite element program ANSYS.
可直观显示任意时刻曲轴内任意截面上的温度场和应力场以及温度、应力等值线随着时间推移的情况，也可以显示任意点上的温度-时间曲线、应力-时间曲线。
The temperature field and stress field at any time on any section as well as the temperature history and stress history on any point of crankshaft can be visually displayed.
获得了非封闭环焊缝焊接温度场和残余应力场，并对模拟结果进行了分析。
The temperature field and residual stress field of unclosed hoop weld were obtained and the results were discussed.
获得了非封闭环焊缝焊接温度场和残余应力场，并对模拟结果进行了分析。
The temperature field and residual stress field of unclosed hoop weld were obtained and the results were discussed.
应用推荐