网络组的输入是定子测温系统提供的每一个测点的一段时间的温度变化过程的数据集。
The input of the network group is a data set of a period of time from a temperature measuring point.
该系统弥补了传统的钻杆热处理控制系统只能显示实时温度，无法保存温度变化过程的缺点。
The system makes up of shortcomings that traditional drill pipe heat treatment control system can only show timely temperature and temperature changes can not be preserved.
为分析工程中各种导热系统的随机温度变化过程，应用随机振动的首次穿越理论对其进行了研究。
The first passage theory of random vibrations was employed to study the stochastic temperature variation of heat conduction systems in engineering.
它们被厚厚的泥沙沉积物所覆盖，并由于化学变化、压力和温度的作用过程，在漫长的时间中变成了我们所知道的石油。
They were covered with huge deposits of mud; and by processes of chemistry, pressure and temperature were changed through long ages into what we know as oil.
它可以被定义为的过程，气体和液体的移动，由于温度的变化和压力。
It could be defined as the process by which gases and liquids move about, due to changes in temperature and pressure.
田间土壤水分、盐分和温度变化使水、盐、热耦合迁移的过程极其复杂。
The variation of soil water, salinity and temperature in the field makes the coupled transport processes of them very complicated.
针对织针网带炉淬火，利用有限元分析软件ANSYS，对织针加热过程中的温度变化进行了模拟。
The temperature change of knitting needles during quenching in the mesh-belt furnace was simulated using the ANSYS software.
与大脑温度的狭窄范围相对应的一种过程可能使得正凡人脑遭到一种频次范围在大约10赫兹并且只在0.1赫兹范围内变化的次谐波的影响。
A process which is coupled to the narrow band of brain temperature could allow all normal human brains to be affected by a sub-harmonic whose frequency range at about 10 Hz would only vary by 0.1 Hz.
运行时，当过程温度变化时，转子和环绕它的壳体以及其中的液体的温度都处在平衡状态。
In operation the temperature of the rotor, the surrounding case and the liquid inside remains in equilibrium as the process temperature changes.
速度通过孔隙过程中增加的幅度较大，而温度的变化不明显。
However, the velocity is increased greatly and the temperature change is not evident.
该研究通过试验模型测量局部加压过程中金属型、铸件和加压杆的温度变化曲线，分析了传热与凝固现象。
The heat transfer and solidification change are analyzed by measuring the temperature change curves of metal mold, casting and pressurized bar in experimental model during local pressurization.
并从色谱热力学函数分析了保留指数随温度变化规律的主要原因是由于在色谱分离过程中不同的熵变和焓变所造成的。
The changing law of retention index with temperature from chromatographic thermal function resulted from the variation of the different entropy and enthalpy during the chromatographic separation.
其主要目的是通过不同温度的热处理，发现碳对氧沉淀影响的规律，以及热处理过程中硅片样品少子寿命的变化。
The most aim is to found the rule of carbon effects oxygen deposition and the change of minor carrier lifetime in annealing.
压缩气体基本上是等温的，即压缩气体过程温度变化很小。
Compressed gas is isothermal, that is, the process of compressed gases very small temperature changes.
结果不同的操作方式、过程，以及材料质量要求等，呈现出相应温度变化规律。
Results Different operation mode and process, and material quality had the corresponding regularity of a change in temperature.
作为非接触测温的红外测温技术，能够真实地反映出焊件在焊接工艺中的温度随时间变化的热循环过程。
The infrared measuring temperature technique as non-contact measuring temperature method can reflect the heat cycle process of the temperature change along with time of the weldment.
成形过程中的温度场变化对钛合金锥形件温热剪旋成功与否，以及产品的精度影响很大。
Changing of temperature distribution during warm shear spinning of cone workpiece of titanium alloy greatly affects the process and the product's precision.
通过分析，确定了相关参数，提出应加强对温度及组织变化过程的控制，以提高产品的性能、质量。
Relative parameters are determined according to analysis and control on temperature and structure change course should be strengthened in order to improve product property and quality.
利用有限元法对混炼过程中密炼室、胶料的温度分布以及变化情况进行了分析。
Using the finite element method to analyze the mixing chamber, the temperature distribution as well as the change situation.
主要讨论海水温度的变化对海水电解用阳极过程的影响。
The influence of temperature on the anodic process of seawater electrolysis are discussed.
在加热过程中，胶层粘度随温度和时间的变化可用二重指数方程描述。
The viscosity change of a glue line with temperature and time could be described qualitatively by a dual equation.
数学模型可以准确预测真空冷却过程中的温度变化和质量损失，将有助于进一步理解和研究真空冷却机理。
The mathematical model can be used to predict the variations of temperature and mass loss for understanding the mechanism of vacuum cooling.
介绍了刨花板热压过程中板坯的物理变化和化学变化，分析了热压温度、时间、压力在热压过程中的作用，阐明了热压工艺是刨花板生产中产品质量保证的重要环节。
This paper introduces the physical and chemical change of particleboard in the course of hot pressing and analyses the effect of temperature, heating time and pressure.
据此提出了考虑垢层表面温度变化的描述结垢过程的传热传质模型。
A heat mass transfer model is constructed to take the variation of the scaling layer surface temperature into consideration.
为了了解大型转炉吹炼过程中熔池温度的变化规律，利用副枪在转炉吹炼过程中进行了测温和取样分析。
To comprehend the change law of bath temperature in blowing of large converter the sublance is used for measuring the temperature and sampling analysis.
在运转过程中，温度变化对结构的应力状态具有显着的不容忽视的影响。
During operation, temperature changes have significant influence that can not be ignore in the stress state of the structure.
采用数值模拟的方法，研究了纯铝在静高压作用下凝固过程温度场的变化情况。
Numerical simulation of temperature field during al solidification process under static high pressure has been conducted.
采用数值模拟的方法，研究了纯铝在静高压作用下凝固过程温度场的变化情况。
Numerical simulation of temperature field during al solidification process under static high pressure has been conducted.
应用推荐