作为小温度范围准确度要求（几度），设备的整体测量链条的准确性是非常重要的。
As a small temperature rangeis required for accuracy (A few degrees) the accuracy of the equipment is veryimportant for the overall measuring chain.
其保证了橡胶加工工艺过程中温度参数的稳定性和准确性，是决定橡胶产品高质量的关键。
It ensured the stability and accuracy of temperature parameter in rubber processing technology were key determining rubber products high quality.
与机理法和统计法相比，钢水温度预报的适应性和准确性都得到了显著提高。
Comparing with previous methods, the adaptation and accuracy of the steel temperature prediction have been improved.
但这种传感器的准确性受连接导线分布电容和温度的影响较大，从而制约了电容式油量表测量精度的提高。
But the distributed capacitance of connecting wire and the temperature have a bigger effect on the accuracy of this kind sensor, the increase of the sensor's precision was constrained.
利用流体包裹体研究油气充注史的核心问题是流体包裹体均一化温度的可靠性、埋藏热演化史的准确性。
The reliability of the homogenization temperature and the veracity of burial thermal evolution history is the key question in the study of infilling history of gas reservoirs by using fluid inclusion.
为了保证监测数据的准确性，提出了不同环境温度的测量措施。
In order to guarantee the accuracy of noise measuring data, the monitoring measures in different environmental temperature was advanced.
基于差动原理对HF酸恒定化学蚀刻速率法进行改进，以降低环境(温度、HF酸浓度等)变化对测量结果的影响，从而提高测量效率和测量准确性。
Constancy of chemical etch rate method was modified so as to reduce the influencing factors such as temperature and concentration of HF acid. The efficiency and accuracy are improved.
与传统温度监控系统相比，本系统决策误差信息小，具有较好的实时性和准确性。
Compared with traditional temperature monitoring system, decision-making error information of this system is less, and it has better real-time performance and veracity.
通过检查炉子内部控制设备点位置的操作温度，证实马弗炉的测量和控制电路的准确性。
Verify the accuracy of the measuring and controlling circuitry of the muffle furnace by checking the positions in the furnace at the control set point temperature of intended use.
利用随机气象模型对成都和重庆的气象资料进行了模拟，所得的温度和辐射数据的准确性均较好。
Simulates the meteorologic data of Chengdu and Chongqing using a stochastic climatic model. Both the temperature data and solar radiation date are quite satisfactory.
本文研究了热像仪在探测小目标表面温度时的准确性，并讨论了误差校正的方法。
In this paper, a study on the accuracy of a thermal camera in detecting the temperature of a small target is made. Methods to compensate for the inaccuracies are discussed.
研究结果表明，该方法有效抑制了温度对压力传感器的影响，提高了传感器的稳定性和准确性。
The research results show that this method can restrain the effects of temperature on pressure sensors effectively and enhance their stability and accuracy.
因而加热的快速性、稳定性以及温度控制的精度都直接影响着测试结果的准确性。
Accuracy and stability of the pyrogenation and the precision of temperature control influences the test result directly.
它的准确性值得怀疑，结果也随所使用的特定的程序变化，而且随试验温度变化。
Its accuracy is questionable, and the results vary with the specific procedure used, and with test temperature.
它的优点是能对温度所产生的标点变形进行修正，从而提高垂直位移观测精度，控制钻孔质量才能保证双金属标安装的准确性。
System advantage is that it can amend mark point distortion, thus, accurate observation of vertical displacement can be got. Bimetal mark install veracity depends on quality of digging hole.
当是一个时钟不只是一个时钟？当它提供了这么多，不只是更多的时间：每一年内第二个例子，温度，月相和准确性。
When it provides so much more than just the time: temperature, phase of the moon, and accuracy within one second per year, for example.
饱和空气温度，箱内温度，测试液温度三套完整温度控制系统，确保实验之准确性与标准性。
Three set temperature controlling systems of air-tank temp, test area temp, solution temp. to make sure the correctness and standardity of the testing .
建议加强回火工艺的控制，确保加热温度和时间的准确性。
The relevant suggestion was put forward to strictly control the tempering process and ensure the temperature and heat preservation time exact.
为了确保热电偶温度计测温的准确性，不仅在出厂时要对它进行严格检定，而且在随后的使用过程中还要进行周期性检定。
To ensure the thermocouple's veracity, it must be verified strictly before it is sold, and be calibrated periodically in the process of its use.
红外无接触式测温，准确测出组件温度，确保了温度修正的准确性。
Infrared non-contact temperature measurement can accurately measure the temperature of the module. So it ensures the accuracy of temperature correction.
针对影响测量准确性的三个因素：溶液温度、玻璃电极高内阻和电极偏差，提出了解决办法。
A resolution is put forward to eliminate the influence caused by three factors, i. e. solution temperature, high inner impedance of glass electrode and deviation of electrode.
传统的冷库温度控制技术对库房温度测量的准确性不高，而且不能满足节能和智能化要求。
The traditional cold storage temperature control technology can not get the temperature accurately and can't meet the requirements of energy saving and intelligent control.
同时，对铸球凝固时的温度进行了实测，计算结果与实测结果相符，证明该数值模拟方法具有准确性。
At the meantime, the solidification temperature was measured, the results calculated by simulation software agree well with those obtained by experimental measurements.
设备和管道的隔热计算十分繁琐和复杂，为提高计算效率和计算的准确性，采用经济厚度计算法，编制了一种具有保温、保冷和露点温度校核等多功能的设备和管道隔热计算程序。
To get more accurate and efficient solution, a computer program based on economical thickness method is developed with functions of thermal insulation, cooling insulation and dew point check, etc.
通过实例仿真得出不同影响因素对电缆温度场分布的影响规律，并验证了该模型的准确性和可靠性。
The impact law of different influencing factors on cable ampacity is obtained by case simulation, demonstrating the correctness and reliability of the model.
通过实例仿真得出不同影响因素对电缆温度场分布的影响规律，并验证了该模型的准确性和可靠性。
The impact law of different influencing factors on cable ampacity is obtained by case simulation, demonstrating the correctness and reliability of the model.
应用推荐