温度偏差色彩报警功能，可及时发现异常温度点。
Color temperature deviation alarm function can be found abnormal temperature point in time.
在温度偏差较大时采用专家控制，保证快速的升温和降温效果。
The other way round, the expert control is employed to realize quick increase or decrease of the temperature.
大型四角切圆燃烧锅炉的烟、汽温度偏差对其安全运行具有重要影响。
The temperature deviation of gas and steam influences the safe operating of large pulverized combustion boiler with tangential firing.
针对六角切圆燃烧锅炉水平烟道入口烟气温度偏差问题，利用模化理论建立试验台，进行冷态模化试验。
Aimed at the deviation of gas temperature in the input of level gas flue of six angles tangential firing boiler, the cold modeling test is put on building the test stand by using the modeling theory.
该文介绍引进型300MW机组锅炉、再热器系统经改进，减少再热蒸汽流量偏差和温度偏差的实炉试验结果。
The paper describes the test results of improvement effects on a licensed 300mw set's boiler and its reheater for the purpose of diminishing reheater's mass flow and temperature deviations.
对温度用模糊PID控制，以温度偏差和温度偏差变化为输入，燃料流量为输出，这个模糊控制器能满足控制要求。
The fuzzy-PID control used in temperature control, with temperature departures and the changes and as its input and fuel flow as output, could satisfy the control demand.
阐述了四角切向燃烧600MW锅炉过热器系统蒸汽温度分布特性，分析了这种温度分布特性产生的原因，并提出了解决过热器系统存在的蒸汽温度偏差的措施。
This paper introduces the steam temperature deviation in the superheater system of 600mw tangential firing boiler and also introduces the reasons to cause these steam temperature deviations.
您已经看到均值和标准偏差，直观上您可能会觉得温度是正态分布的。
You have seen the mean and standard deviation, and intuitively you might expect temperatures to be distributed normally. Let's check
膜材料性能、温差极化以及温度对渗透通量的影响是造成这种偏差的主要原因。
The deviation between experimental and theoretical MITDs is mainly caused by membrane property, temperature polarization and the influence of temperature on OD flux.
其温度值明显取决于试验条件和允许偏差，因此对比较不同的聚合物而言只有试验数据是真正有用的。
The temperature value obviously depends upon the conditions of the test and the allowed deflection and for this reason, the test values are only really useful for comparing different polymers.
完成这个目标的一个方法是首先测量温度，然后将其与期望值比较，在比较的基础上再决定如何去做以消除偏差。
One way to accomplish this objective is by first measuring the temperature T(t), then comparing it to its desired value, and based on this comparison, deciding what to do to correct for any deviation.
比例温度控制（P）是一种的连续温度控制方式，它的特点是输出与输入的偏差值成比例关系。
P is a kind of basic method to successive temperature controlling. Its characteristic is the deviation value in direct proportion relation that outputs and inputs.
采用这一建模方法对石油钻杆在热处理过程中的温度测量偏差进行校正。
Then the modeling method is applied on the tuning of temperature measuring error during the processes of oil pipes are heated.
本文运用热弹性力学原理，分析了温度变化对啮合齿轮侧隙的影响以及对齿厚偏差选择的影响。
Based on the thermal elastic mechanics, the influence of temperature change on the normal backlash was analyzed, and the deviation of teeth width was calculated.
针对影响测量准确性的三个因素：溶液温度、玻璃电极高内阻和电极偏差，提出了解决办法。
A resolution is put forward to eliminate the influence caused by three factors, i. e. solution temperature, high inner impedance of glass electrode and deviation of electrode.
针对HVAC水系统中温度传感器固定偏差的故障，提出了一种基于分析冗余和数理统计的故障诊断方法。
A fault detection and diagnosis method is presented, which based on analytical redundancy and statistics, for detecting and evaluating the temperature sensors with fixed bias in HVAC water systems.
即使在阴影中，间接辐射也会使温度计产生小的偏差。
But even in the shade, indirect radiation will cause our thermometers to be slightly optimistic.
热塑性塑料带载运行温度可从质量上定义为热偏差温度。
The temperature at which a thermoplastic can be operated under load can be defined qualitatively by the heat deflection temperature.
增加组织液的温度和介电参数偏差的不确定度评估指南。
Uncertainty evaluation guidelines for temperature and dielectric parameter deviations of tissue-equivalent liquids.
这是中心承载的该材料简支梁达到预定偏差的温度。
This is the temperature at which a simply supported beam specimen of the material, with a centrally applied load, reaches a predefined deflection.
本文对不同平衡温度模拟结果的差异(偏差场)进行了分析，探讨某局地热力强迫对全球其它区域环流异常的影响效应。
The differences between results of simulations with different equilibrium temperatures reflect the effects of local thermal forcing on the anomalous response of the global circulations.
该系统对锅炉过热器进行热偏差和管壁温度仿真模拟计算，并可对在线运行的锅炉进行预报，为锅炉的运行以及重新设计提供依据。
The system can made analogy computation for the thermal deviation of the boiler superheater and the temperature of the boilers pipe, then, the defects of the components of the boil…
同时采用不同的合拢分段会产生不同温度应力以及初始应力，从而影响合拢偏差。
The different closure division may produce different temperature strain and initial strain at the same time, and effect closure deviation thereby.
同时，采用跳转技术对偏差及温度漂移进行了补偿，减少了温度等因素对本系统造成的影响。
Because the deflection and the temperature floating is compensated by flipping technology, the influence of some factors such as temperature on the system is reduced.
讨论了新的近似式计算值与温度积分数值积分结果的偏差。
And its deviation from the values calculated by numerical integrating was discussed.
当温室内的温度超过设定偏差上限，计算机发出调节指令，执行机构打开通风降温系统；
When the greenhouse temperature deviation over the upper limit set, the issue of regulation of computer instructions, the executing agency to open the ventilation cooling system;
对阴极温度的不均匀导致的发射电流偏差进行了计算分析，并首次得到了发射电流误差小于5%的阴极丝最小长度的计算公式。
Non uniform temperature distribution causes deviation in emission current, the error of which is less than 5% for the shortest length of diode cathode.
各裂解炉管出口温度(COT)偏差的发散和误差的不确定，将对裂解炉操作和乙烯收率带来很大的影响。
The scattered coil - outlet - temperature (COT) and the unfixed temperature errors would influence severely the operation of cracking furnace and the ethylene yield.
因此，温度迅速检查几次短的间隔，以及偏差对这些数据的计算来衡量实际温度只。
Therefore, the temperature is quickly checked several times during short intervals, and the deviations of these data are calculated to measure only the actual temperature.
因此，温度迅速检查几次短的间隔，以及偏差对这些数据的计算来衡量实际温度只。
Therefore, the temperature is quickly checked several times during short intervals, and the deviations of these data are calculated to measure only the actual temperature.
应用推荐