强度高，抗氧化铁皮渣侵蚀，耐磨性好。
High strength good resistance to errosion of ferric oxide slag good wear resistance .
该产品具有极强的抗渣侵蚀能力和较高的高温体积稳定性。
It has very good property of slag corrosion resistance and high-temperature volume stability.
实验证明，镁锆铬质浇注料的抗渣侵蚀能力、抗渣渗透能力较高。
The experiment results show that the resistance of magnesia-zircon-chrome castable to corrosion and penetration of slag are higher.
经试验室试验表明，该料具有较强的抗渣渗透能力和抗渣侵蚀能力。
The results from laboratory show that it is of high resistance to penetration and erosion of slag.
用静态坩埚法研究了加入不同添加剂的刚玉-尖晶石浇注料抗渣侵蚀行为。
The corrosion behaviors of the different additions to corundum-spinel castable refractory were studied by using static crucible method.
具有施工性能好，烘烤时不爆裂，抗钢水和熔渣侵蚀、解体容易等优良性能。
It possesses good properties for construction or repairs, high resistant of the cinder steel corrosion, can not burst at baking, disintegrating easy.
金属陶瓷具有良好的耐热态金属及熔渣侵蚀性能，可实现对高温熔体温度的连续测量。
The cermet had merits of high resistance to corrosion of hot metal and slag, it can be used for continuous temperature measurement.
中温强度高，高温体积稳定，耐磨损，抗熔渣侵蚀。返料器、省煤器炉墙、混合室内墙等部位。
High strength in medium temperature, stable volume in high temperature, wear-proof, anti-slag corrosion, material returner, coal-saver furnace wall and mixing chamber inner wall etc.
结果表明，白云石材料具有较高的耐高碱度渣侵蚀性、较高的抗热震性和较高的抗机械冲刷能力；
The results show that dolomite material has higher erosion-resisting characteristics to high pH value slag, higher resistant characteristics to temperature shock and higher mechanical washing.
结果表明，添加高铝矾土能增强干式料的烧结性能，同时在不降低干式料抗熔渣侵蚀性的情况下提高了干式料的抗熔渣渗透性。
The result shows that adding alumina in the materials can promote its sintering properties, and improve its penetration resistance meanwhile don't effect to its corrosion resistance.
指出在冶炼过程中炉衬遭损坏的主要原因是初渣的化学侵蚀和精炼期的高温热作用。
It shows that the main causes of lining wear in ferro - chrome smelting process are the chemical erosion by early slag and the thermal effect at high temperature.
介绍了夹杂物的来源，包括内生夹杂和外来夹杂，着重于二次氧化产物、卷渣、内衬侵蚀。
The paper introduce the impurities origination including internal and external impurities, and pays more attention to re-oxide, rolling slag and inner-lining erosion.
电熔镁铝尖晶石具有体密大、热震稳定性好、抗侵蚀能力与抗渣性强的优点。
Fused magnesium aluminum spinel has the characteristics of high bulk density, high thermal shock resistance, strong corrosion resistance and slag-resistance.
总结并讨论了近年来国内外对渣-铁界面处耐火材料侵蚀机理的研究成果及其进展，给出了防止其侵蚀的措施。
This paper summarizes recent progress in research on local corrosion mechanism of refractory at slag-iron interface, with emphasis on characteristic mechanism on slag-iron interface.
超高功率电弧炉出钢口在使用过程中要经受钢液的冲刷、渣液的侵蚀、氧化和温度的剧烈变化。
The taphole of UHP-EAF should stand severe molten steel corrosion, slag erosion, oxidation and temperature change during operation.
在使用电渣熔铸方法生产变截面复杂铸件的过程中，经常会发生结晶器被侵蚀甚至击穿的重大事故。
In the process of making the complex and various sections casting by electroslag casting method, it will frequently occur serious accidents that the crystal instrument would be always destroyed.
由于目前的钢和渣的高温和强烈的侵蚀，的连续钢温度信息可以不被现有的测定方法通过以下方式获得。
Because of high temperature and strong erosion from steel and slag at present, the continuous steel temperature information can not be obtained by existing measurement method.
在AOD炉溅渣过程中，喷枪枪位直接影响溅渣护炉的效果，调整喷枪枪位可有效的对AOD炉炉衬侵蚀严重的部位进行补救。
Spray lance heigh direct impact slag splashing effect during slag splashing in AOD, the spot which is corroded seriously could be recoveried effectively by adjusting the spray lance height.
本实验采用SEM和EDAX研究了各段带的显微结构和基质组成，讨论了转炉终渣对浇注料的侵蚀过程和机理。
The changes in the microstructure and matrix composition of every zone have been investigated by using SEM and EDAX. Also the process and mechanism of slag corrosion have been discussed.
实际操作中几乎是无渣的，因为该工艺不会对金属表面进行任何强度的侵蚀。
Practically no sludege is formed during the process since the metal surfaces are not etched to any great extent.
结果表明，电熔AZS回收料的引入，增大了基质的高温黏度，改善了制品高温显微结构，有利于制品热震性能的提高，并对高钙渣系具有良好的抗冲刷性能以及抗侵蚀性能。
The performance index shows shat obsolute AZS materials can increase the thermal shock performance of the bricks, and have good erosion-resisting and erosion-flushing characteristics on h.
本文认为炉衬采用高温烧结或复合炉衬是控制熔渣浸入侵蚀的最佳途径。
The article regards that the optimum way to prevent penetrating of slag and corroding of lining is using high temperature sintering or composite lining.
探讨了渣对铝镁炭砖的侵蚀与渗透机理，并提出了抑制渣渗透的措施。
The mechanism of slag corrosion and penetration into alumina-magnesia-carbon bricks has been discussed. The measures of restraining slag penetration have been suggested.
结果表明：材料被侵蚀后结构发生变化， 可大致分为渣带、渗透带和未变带；
The results show that after being corroded, the structure of TiN/O′-Sialon material is composed of slag zone, penetrated zone and unchanged zone.
根据LF用钢包的侵蚀规律，结合济钢第一炼钢厂钢包的实际使用状况，开发了渣线镁碳砖和铝镁尖晶石浇注料复合砌筑工艺。
The composite bricklaying technology of ladle was developed according to the eroding rule of ladle for ladle furnace and combining the actual use status of the ladle in no.
根据LF用钢包的侵蚀规律，结合济钢第一炼钢厂钢包的实际使用状况，开发了渣线镁碳砖和铝镁尖晶石浇注料复合砌筑工艺。
The composite bricklaying technology of ladle was developed according to the eroding rule of ladle for ladle furnace and combining the actual use status of the ladle in no.
应用推荐