用摆线对渐开线齿轮齿形进行修形。
提出了一种新型渐开线齿轮。
最后给出了渐开线齿轮传动设计的计算结果实例。
At last, the result of the involute gear driving design is described.
提出了任意转角位置的渐开线齿轮齿廓的参数方程。
The parameter equation of involute tooth profile on any angular position is presented.
对渐开线齿轮动态力研齿机理进行了理论分析和实验研究。
A thorough study for the mechanism of the involute gear lapping with dynamic force was made in theory and test.
探讨用渐开线齿轮取代内外摆线齿轮实现RV传动的新途径。
The paper presents a new approach to the development of RV transmission mechanism by replacing cycloid gear with involute gear.
并采用赫兹接触理论和有限元方法分析渐开线齿轮的接触应力。
The gear teeth engagement of gear transmission was being studied as a Non-Hertz elastic contact problem.
介绍用二维CAD软件作图法设计渐开线齿轮、摆线齿轮的方法。
Method is introduced to design involute gear and cycloid gear with 2d CAD software and graphic method.
为解决渐开线齿轮的精确造型问题,提出了齿廓渐开线曲线的计算公式。
To model involute gears accurately, a formula for calculating the involute curve of gear profile is presented.
根据渐开线齿轮的原理和渐开线的基本性质,介绍渐开线齿轮齿廓的形成。
On the base of principle of involute gear and its property, the formation of tooth surface are introduced.
从等强度概念出发,推出一个据以选取渐开线齿轮齿数的简单、实用公式。
This paper advanced a practical and succinct formula for tooth number choice of involute gear.
实践证明该方法为其它CAD二次开发平台绘画渐开线齿轮提供可借鉴之处。
In practically, it proofs that this method has reference value for drawing involute gear in other CAD further development platforms.
偏心渐开线齿轮传动设计的纯滚动模型、等转角模型和等分模型存在模型误差。
The pure rolling model, equal turning Angle model and bisection model for the design of eccentric involutes gears transmission have model error.
在ANSYS软件中建立了标准渐开线齿轮与修形齿轮的动力接触有限元模型。
The dynamic contact finite element models of standard involute gear and modification gear are established in the software of ANSYS.
利用UG/NX的二次开发模块和参数化建模技术实现了渐开线齿轮参数化设计。
Development parametric design of the gear is realized by using UG/NX second development and parametric modeling module.
在试验台上进行了带式啮合介质齿轮与渐开线齿轮减速器整机啮合性能对比试验。
The performance comparative tests are done within involute gear and gear with meshed medium belt.
分析双渐开线齿轮的螺旋角系数和接触线系数,提出了新型齿轮弯曲应力的计算公式。
The arithmetic for bbending be of DIGLST is Presented after the coefficients of helix angle and contact lines are analyzed by 3-D FEM.
根据渐开线齿轮的基础知识及粉末压制烧结理论确定了设计模具型腔及结构的原理和方法。
According to the requirements for the involute gear and powder metallurgy theory, the present article gives a principle and method for designing die cave and structure.
本文阐述了加工渐开线齿轮的指形铣刀齿形渐开线部分及其过渡曲线部分进行的计算方法。
The article expatiates on calculation of both involute and transitional parts of gear profile of the finger-type milling cutter for processing involute gear.
详细介绍了实际工作中较实用的直齿渐开线齿轮、斜齿渐开线齿轮参数的测量与确定方法。
This paper introduces in detail some measuring and determining methods of the parameters of the straight and inclined involute gears that are more practical in the actual work.
分析了标准和齿顶修形渐开线齿轮的轮齿本体温度和瞬时接触温度及相关因素对它们的影响。
Factors influencing the tooth bulk temperature and the surface transient contact temperature of involute gears with standard and modified tooth profiles are investigated.
用该法已加工出了满足生产要求的摆线齿轮、硬齿面渐开线齿轮成形磨削砂轮金属修整滚轮。
Acceptable metal shaving contact rollers of cycloidal gears and involute gears in shape grinding have been manufactured with this method.
用该法已加工出了满足生产要求的摆线齿轮、硬齿面渐开线齿轮成形磨削砂轮金属修整滚轮。
Acceptable metal shaving contact rollers of cycloidal gears and involute gears in shape grinding have been manufactured with t...
该方法可以提高渐开线齿轮造型精度与效率,从而为渐开线齿轮的有限元分析提供了必要条件。
This approach can improve modeling precision and efficiency of producing involute gear, and provide necessary condition for finite element method analysis of involute gear.
该方法可以提高渐开线齿轮造型精度与效率,从而为渐开线齿轮的有限元分析提供了必要条件。
This approach can improve modeling precision and efficiency of producing involute gear, and provide necessary condition for finite element...
提出用圆弧来代替渐开线齿形的近似方法,实现了渐开线齿轮三维实体造型的直接编程生成技术。
In this paper, an approximate method of using three tangent arcs to substitute the involute gear profile curve is put forward.
UG环境下的渐开线齿轮的三维建模方法很多,其中参数化的渐开线三维齿轮建模最为准确和方便。
There are many methods to design the spur gear in UG, but the spur gear designed with three-dimensional parametric is the most accurate.
运用渐开线展开和曲线包络原理,建立了双渐开线齿轮端面齿廓数学模型,用数据验证了模型的准确性。
The outspread principle of involute and enveloping principle of curve is applied to build the model of double involutes gear contrate profile, the veracity is verified by the data.
张光辉教授认为:分阶式双渐开线齿轮具有良好的工艺性能、弯曲强度和接触强度高、最少齿数小等优点。
Prof. Zhang holds that double involute gear with ladder-shaped teeth possesses the advantages of good technology, high bending strength, high contact strength and fewer teeth.
张光辉教授认为:分阶式双渐开线齿轮具有良好的工艺性能、弯曲强度和接触强度高、最少齿数小等优点。
Prof. Zhang holds that double involute gear with ladder-shaped teeth possesses the advantages of good technology, high bending strength, high contact strength and fewer teeth.
应用推荐