讨论了除蜡剂浓度、超声清洗温度对该清洗剂除蜡效果的影响。
The influences of wax remover content and cleaning temperature on wax removing effects were discussed.
考察了超声频率、超声声强、清洗时间和清洗温度对油砂分离的影响。
The effects of ultrasonic frequency, ultrasonic intensity, cleaning time, cleaning temperature on oil sand separating were investigated.
清洗过程中参数的设置，如清洗温度，清洗时间会对清洗效果产生较大影响。
Cleaning parameters such as cleaning temperature and cleaning time have great effects on the cleaning result.
配成3- 10%的水溶液，采用浸泡，超声波或擦刷方法，根据用户的实际条件，选用适宜的清洗温度和清洗时间。
Make up 3-10% aqueous solution and clean the greasy dirt by soaking, brushing or ultrasonic wave method, choosing the right cleaning temp and time according to user's conditions.
更安全的做法：如果肉类还不够热，你应该再煮一段时间。记得在重新测量之前把温度计清洗干净，避免交叉感染。
Stay extra safe: If the burger's not hot enough and you have to cook it longer, be sure to wash the thermometer before you test the meat again to avoid cross contamination.
然而，在热清洗过程中对处在真空系统中的光电阴极表面温度进行精确测量却是非常困难的。
It is very difficult to measure precisely the surface temperature of a photocathode in a vacuum system during the thermal cleaning.
研究发现，溶剂体系、反应温度、凝胶清洗用剂及洗滤次数等对所得的粉体粒度有较大的影响。
The results show that solvent system, reacting temperature, washing agent and washing-leaching times can influence the perticle size of HAP powder.
该酸度计主要由刮板电机、清洗刮板、温度测量电极、锑电级、参比电极、防护罩等组成。
The acidometer was mainly composed of plough blade motor, cleaning plough blade, temperature detecting electrode, stibium electrode, reference electrode and hood.
给出了实验装置示意图，还介绍了蒸气式激光清洗中的一些理论问题，如峰值温度和瞬态力的估算。
Semiquantitative understanding of optimization steam laser cleaning, such as estimate of peak temperature and estimate of transient force was summarized.
轻松维护：清洗简便、不用控制环境温度和湿度。
Easy to maintain: clean without having to control the temperature and humidity of the environment.
温度调节装置的定期清洗和检查有助于最大可能延长阀门的使用寿命和提高混合性能。
Regular cleaning and checking of thermostat assembly helps to maximize valve life and mixing function.
各种材料的清洗、蒸压时的温度制度、金属丝网的化学浸镀等都会造成产品质量问题。
The quality of finished product may be affected by various factors such as cleaning of raw materials, temperature schedule at autoclave stage, chemical dip coating of metal wire-mesh and so on.
建议：本品为高活性水溶物，能在任何温度下水解，就算原液或清洗后的污水直接排下污水管，亦不会造成管道堵塞。
Recommendation: This product is highly active water soluble, can be at any temperature hydrolysis, even after washing liquid or sewage directly arranged for the sewer pipe will not cause blockage.
清洗水温是严密控制，具有内置的安全功能，消除有害的温度变化。
Cleansing water temperature is closely controlled with built in safety features eliminating harmful temperature variations.
本文叙述了采用化学的方法对初冷器进行清洗，清洗后的煤气温度可达到工艺指标要求，并且取得了良好的效。
The paper addresses a chemical method, by which primary cooler is so washed that the temperature of washed gas meets the requirement of the process standard.
这些单位与IP内置68条，因此可以防水达3栏和耐高压清洗方法以及温度和气候变化(知识产权69K)。
The units are built in accordance with IP 68 and are thus waterproof up to 3 bar and resistant to high-pressure cleaning methods as well as temperature and climate fluctuations (IP 69k).
全中文超大触摸屏操作界面，快速设置清洗参数：溶剂温度、清洗时间、漂洗次数/时间、漂洗温度、烘干时间、烘干温度等参数；
Touch panel interface, quick cleaning parameters setting: Chemical temperature/wash time, resin time/temperature, and dry time/temperature etc.
考察了清洗工艺如动态清洗、温度、清洗剂浓度、操作方式等对膜层清洗效果的影响，确定了适宜的清洗工艺参数。
The cleaning technical technology was confirmed by discussing the effects of technical parameters, such as dynamic cleaning, temperature, concentration of cleaning agent and operating modes.
温度调节装置的定期检查和清洗有助于保证最长的使用寿命和正常的产品使用功能。
Regular checking and cleaning of thermostat assembly helps to assure maximum life and proper product function.
用不同的溶剂清洗聚合产物，并且在不同的温度下干燥产物，以便得到不同的材料用于研究。
The product of the polymerization was washed in different solvents and dried at different temperatures to get different materials for research.
对超滤的操作压力、膜面流速、浓缩比、温度等操作条件进行了研究，并对膜的清洗作了进一步研究。
The operating conditions, such as pressure, recirculation rate, concentration ratio, temperature etc. have been optimized. The washing method of membrane is also studied in this paper.
适当升高清洗液温度，可提高清洗效率。
Rising the temperature could improve the efficiency of removing oil and rust.
用罽洗衣机最长的清洗周期洗涤衣服，并将温度设置为高温，然后在高温下将其烘干。
Wash the garment in the washing machine on the longest cycle available, with the temperature set to hot, then tumble dry it at a high temperature.
在超声波声化条件下，研究确定的低浓度酸性除油除锈清洗介质可在较低温度下，快速有效地去除钢丝表面的油污、铁锈和磷化膜；
The acidic medium could remove oil and rust at relatively low temperatures and in a short time due to the synergistic effect of ultrasonic and chemistry.
采用有限元分析软件模拟计算了激光功率和作用时间对清洗过程中温度的影响，计算结果与实验结果规律一致。
Finite element analysis code was used to simulate the effects of laser power and radiation time on the temperature of samples. The simulation results were consistent with the experimental ones.
得到它们的主要脱附气体的脱附速率的温度特性，即热脱附谱，脱附反应级数和脱附激活能。可为聚变装置真空室的选材和清洗提供参考。
The thermal desorption spectrum (the desorption rate VS sample temperature), the desorption action order and the desorption activation energy have been obtained for main kinds of desorpted gases.
AT 89 C52单片机作为系统的核心处理器，结合温度传感器、单相调压一体化模块来实现对清洗消毒机的程序化控制，并通过液晶显示屏实时显示系统工作状态、温度参数等信息。
This control system is composed of AT89C52 as a center the temperature sensor and module of voltage modulation. The working state and temperature are displayed on liquid crystal display.
它解决了现有的高压清洗机中的温控阀无法使水温始终保持在某一温度之内的问题。
The temperature control valve solves the problem that a current temperature control valve inside a high pressure washer is incapable of preserving water temperature within a certain range.
结果表明，该清洗剂综合性能好，使用温度低，节能效果显著。
The cleaner has excellent comprehensive properties and can be used at low temperature. The efficiency of saving energy is obvious.
优点：自动控制清洗液加热，使清洗的温度更容易控制在工艺要求的温度值；
Advantages:automatic control of cleaning fluid heatingmakes the temperature of cleaning easier to control on the process requirements.
应用推荐