实验结果表明，该新型转子电流混合控制结构可以满足变速恒频风力发电机系统的运行要求，同时实现了发电机的输出功率因数可控。
Experimental results show that the novel rotor current hybrid control system can satisfy the requirement of VSCF wind generator system, and the power factor control of generated power is available.
但从总体而言，目前国内外在抗震结构混合控制减震技术方面还处于试验及理论研究阶段。
But in sum, now at home and abroad, seismic reduction technique of hybrid control for aseismatic structure is still placed in experiment and theories research stage.
介绍了燃料电池的工作原理及其车辆应用模型，并在此基础上进一步阐述了燃料电池混合驱动汽车的结构与其能量流的控制管理策略。
The principle and the application model of full cell in vehicle are introduced. The structure and energy flow control strategy of fuel cell hybrid vehicle are described.
在地震信号和建筑结构系统的范数分析基础上，使用了混合控制优化指标J作为优化目标，并给出其物理含义。
Base on the norm analysis of seismic signals and the structural system, the mixed optimal control index J is cited; and its physical implication is defined.
提出了一种混合级联型多电平逆变器拓扑结构，给出了逆变器的控制方案。
A hybrid cascaded multilevel inverter topology is presented. The control scheme of the hybrid cascaded multilevel inverter is given.
其控制结构是向前和混合拉链，单调深度优先查找。
Its control structure is a forward zipper with preferential seek for monotonous depth.
通过控制混合料的干密度、水泥用量和水灰比的取值范围，可使混合料同时满足排水性能要求和结构强度要求。
By controlling the range of the dry density, magnitude of cement and water cement ratio of mixture, the requirement of drainage property and structure strength can be fulfilled.
分析了新型混联式混合动力客车动力系统的结构特点和总体布置，介绍了该系统的主要控制策略。
The structural characteristics and layout of a new parallel-series hybrid electric vehicle were analyzed, and its main control strategies were introduced.
论述了一种实用于抄纸过程质量控制系统(QCS)的计算机混合式网络结构，并讨论了各类相关的通讯协议。
In the paper, a practical compound network structure is discussed, that is used in a quality control system (QCS) on paper-making, meanwhile we talk over some protocol of correlative communication.
基于这种思想，本文对在砌体结构上安置橡胶垫隔震支座和作动器的混合控制系统进行了研究。
According to this idea, hybrid control system consisted of rubber - bearing isolation and actuator is studied in this thesis. The hybrid control system is put on the brick structure.
提出了一种系统级电流使能控制结构，可广泛地应用在CMOS数模混合电路中，用于实现系统级的低功耗设计。
A low power design in system level using current steering architecture, which can be applied to the system of CMOS mixed signal circuit widely, is presented.
介绍了应用于混合动力汽车上的永磁同步电动机的结构、工作原理、控制方法。
The structure, working principle, control method of the permanent-magnetic synchronized motor used in hybrid vehicles are described.
对串联混合型有源电力滤波器的电路结构、系统特性、控制方法等进行探讨与分析。
The circuit structure, control method and system characteristics of the hybrid type series active power filter are discussed.
根据某混合动力电动汽车控制系统结构和控制器网络对信息实时性的需求，设计了该车的TT CAN协议。
TTCAN protocol has been designed for hybrid electric vehicle according to the structure of control system and the real-time demands of controller network.
混合振动控制是将主动振动控制和被动振动控制同时应用于被控结构，充分利用它们各自的优点，达到最佳的隔振效果。
The hybrid vibration control is to apply both the active and passive vibration control to the same controlled structure in order to take full advantage of them and obtain the optimal isolation effect.
文中提出一种基于模糊自适应学习控制(FALCON)结构下新型的混合学习控制策略。
A new fuzzy adaptive learning control (FALCON), structure based mixture learning control is put forward in the paper.
在研究与掌握ADVIS OR车辆仿真系统结构组成的基础上，对该系统进行了二次开发，建立了该仿真系统不具备的某特定车型的混合动力系统仿真模型及其控制器模型。
The advanced vehicle simulation software ADVISOR is redeveloped for setting up the simulation models for a specific hybrid electric vehicle and its controller, which was not available in ADVISOR.
通过分析并联混合动力电动汽车的结构和工作模式的切换过程，讨论了并联混合动力汽车进行发动机调速控制的必要性。
By analyzing the structure the working mode, and the switching process of parallel hybrid electric vehicle, the importance of engine speed regulation was discussed.
对设置粘弹性阻尼且基础隔震结构的混合振动控制问题进行了研究。
The study results show that the hybrid control for the base-isolation structure with viscoelastic damper can improve efficiency of control for .
其次，文章重点对电容注入方式的并联混合型有源电力滤波器的电路结构、工作原理、谐波检测方法、控制方式、电路设计进行了理论分析。
The theoretic analysis is accomplished on the circuit topology, principle, harmonic detecting method, control method and circuit designing of Parallel Hybrid Active Power Filter (PHAPF).
根据某混合动力电动汽车控制系统结构和控制器网络对信息实时性的需求，设计了该车的TT CAN协议。
A TTCAN protocol has been designed for hybrid electric vehicle according to the structure of control system and the real-time demands of controller network.
试验结果表明在混合网络拓扑结构上使用控制速率的算法可以减少传输过程中的丢包率，提高视频传输的实时性。
The results validate that hybrid network topology and the rate control algorithm are feasible to decrease packages losing and increase the real-time performance for vi...
根据并联式混合动力系统结构，研究了其运行模式以及动力源能量分配的控制策略。
According to the drivetrain structure of the parallel hybrid electric vehicle, the running modes and the power management control strategy are studied.
文章最后介绍了混联式混合动力客车整车CAN控制网络的结构原理和整车控制器的开发方法。
Last, the configuration of the CAN-based control network and the development approach of the VCU for the series-parallel hybrid bus are introduced in this paper.
提出了一种神经网络电流内环控制加混合模糊pi电压外环控制的双环控制结构。
This paper presents a new dual-loop control structure, with a neural network current as the inner-loop and a hybrid fuzzy-PI voltage as the outer-loop.
介绍了计算机控制式沥青混合料马歇尔稳定度试验仪的基本结构及其控制系统的设计与实现。
This paper introduces the designing idea of test software system for bituminous mixtures MLS stabilization test, and gives some key technology of system.
运用复杂混合控制系统层次结构理论，提出了突出人作用的网络中心战层次模型，分析了网络中心战的核心指挥与控制系统。
Anewlayermodel including man thinker layer about NCW based on the theory of the man - machine hybrid control system is proposed. And the core command and control system of NCW is analyzed.
本文对基于混合式控制结构的移动机器人进行了较系统的研究。
This paper do systematic research for Mobile Robot base on Hybird Control Architecture.
本文对基于混合式控制结构的移动机器人进行了较系统的研究。
This paper do systematic research for Mobile Robot base on Hybird Control Architecture.
应用推荐