正是这些问题促使我们去试验如何构建混合式集群(hybridcluster)，即由异构操作系统构成的集群。
These questions led us to experiment with how to build a hybrid cluster, a cluster consisting of heterogenous operating systems.
在此基础上研究了利用谐波反电势信号实现混合式步进电动机闭环控制的方法，设计了步进电动机的微机控制系统。
On this base, the closed - loop control method of hybrid step motor using the harmonic back EMF is investigated, and the microcomputer control system of step motor is designed.
在传统流媒体技术的基础上提出混合式结构的P2 P流媒体模式，以进一步优化远程教育系统。
In this paper, the traditional streaming media technology on the basis of the structure proposed hybrid P2P streaming model, to further optimize distance education systems.
经分析比较，提出了一种用高温超导线圈和常导线圈构成的混合式电磁吸力型悬浮系统方案。
This paper presents a new suspension system with hybrid electromagnets made of high temperature superconductor and normal conductor coil.
首先，文中提出MPRS的结构模型和执行模型，在此基础上建立了一个完整的混合式可重构计算系统。
At first, an architecture model and an executing model of MPRS are developed to build a complete computing system as the basic research platform.
混合式步进电动机伺服系统转子的位置检测，可以用传统的外配位置传感器或基于理论算法的无位置传感器方案，但是存在许多问题。
Position detection of rotor in hybrid stepping motor servo system can use traditional outside position sensor or sensorless scheme based on theoretical algorism, but there are many problems produced.
为了解决太阳能和土壤源热泵单独应用时存在的缺陷，提出太阳能-土壤源混合式热泵系统的设计方案。
For solving defects when solar energy and geothermal-source heat pump are used alone, method of the solar energy - geothermal source hybrid heat pump system is proposed.
本文提出适合于两级混合式多传感器系统的全局最优状态估计解。
This paper presents a globally optimal composite filtering solution for a two-level hybrid multisensor system.
本文提出了一种单片机控制的软硬件结合的正弦波细分的三相混合式步进电动机微步驱动系统。
It is presented in the paper that SIN subdivide microstep driving system with microprocessor controlled for three phase hybrid stepping motor synthesises both software and hardware.
文章介绍了基于80c 196kc为控制核心的激光雕刻机控制系统的硬件设计，实现了对混合式步进电动机和激光电源的控制。
The paper introduces the hardware design of the laser engraving system based on 80c196kc, the control of hybrid step motors and laser power supply.
该系统基于80C31单片机为主控制器，采用了混合式稀土永磁步进电机为执行部件，并以双通道旋转变压器为天线位置传感器。
The system adopts 80C31 MCU as the main controller, hybrid Rare-Earth permanent magnet stepper motor as the execution component, bio-passage rotary transformer as antenna position sensor.
系统融合了工具化思想，构造了具有新意的基于实例与知识的混合式工艺决策策略并采用模型重构法和特征拼装技术生成工序图。
In this system, tool means is adopted, mixed technological decision based on example and knowledge is constructed, sequence Graph is obtained by model reconfiguration and feature assembling.
介绍了一种基于双余度混合式步进电动机的双自由度卫星天线运动控制系统。
This paper introduces a double freedom degree motion control system of satellites antenna based on dual-redundancy hybrid stepping motor.
本文给出了两种结构的可用于接触器、断路器及混合式电路的直动式极化磁系统，分析了其工作原理，并根据其等效磁路对其进行了计算。
The paper presents two kinds of the straight type polarized magnetic system that can be used in contactor, breaker and hybrid electrical appliance, and analyzed the working principle.
混合式步进电动机内部是径向和轴向混合的磁系统，气隙或齿层的磁场沿电机轴向非均匀分布，将问题简化为二维磁场后要得到精确结果有一定的困难。
There are mixed magnetic field system of axial and radial in hybrid stepping motors, and the magnetic field in the gap (or teeth layer)is distributed uneven along the axial direction.
本文系统介绍了主动、被动、混合式磁力轴承的工作原理、工作特点及其在工业实际中的应用。
The principles and the development of active magnetic bearing (AMB), passive magnetic bearing (PMB), hybrid magnetic bearing (HMB), and their applications in industries are put forward.
对混合式海水温差能发电系统的两种循环形式进行了对比分析。
Comparative research is performed for two cycle modes of hybrid OTEC systems.
建立了包括电流控制电路、功率驱动电路以及五相混合式步进电动机在内的恒频斩波恒总流驱动系统的完整的数学模型；
Mathematical model of the system, included the current control circuit, power driving circuit and five-phase hybrid stepping motor is established.
本文研究了一种将窄缝与栅片配合应用于限流断路器的新型混合式灭弧系统。控制了栅片间金属短弧的金属蒸气喷流，同时削弱灭弧室中热气体的回流。
In this paper, we present a new type of hybrid arc quenching system, which controls the metal vapor and back flow of the hot air in splitters arc quenching chamber.
该系统采用了检索式决策成形工序、创成式决策辅助工序的混合式，具有很强的实用性。
The Mixed Approach of the Variant Approach to decide the forming process and the Generative Approach to decide the aided process makes the system very practical.
最后，对两相混合式同步电动机的双闭环控制系统进行了仿真和实验，给出了仿真和实验结果。
At last, simulations and experiments of the double-closed-loop control system of the motor are carried out and results of simulations and experiments are given.
介绍了地下土壤的热平衡问题，采用太阳能辅助加热的混合式地源热泵系统是有效的方法。
This paper introduces heat balance problems of underground soil, effective method of mixed GSHP for solar energy.
介绍电流型驱动的二相混合式步进电动机系统，它可同时具有与五相电动机一样的分辨率。
This paper deals with current-type two phase HB step motor systems, which having the resolution of five phase ones at the same time.
提出一种混合式折页机的数控改造方法，并对系统软硬件设计实现方法进行了叙述。
It not only introduces a method of designing the composite foldout machine but also presents the solution of hardware and software system.
论述了一种实用于抄纸过程质量控制系统(QCS)的计算机混合式网络结构，并讨论了各类相关的通讯协议。
In the paper, a practical compound network structure is discussed, that is used in a quality control system (QCS) on paper-making, meanwhile we talk over some protocol of correlative communication.
介绍一种混合式直线步进电机的DSP控制系统。
DSP control system is introduced for the hybrid linear step motor.
提出了适合于混合式CAPP系统的基于分类编码与方位特征要素输入法相结合的零件信息输入。
The part information importing method which based on coding and feature position element importing method and suitable for blend CAPP system was brought forward.
在对机器人语言的特点和系统构成分析的基础上，开发了混合式弧焊机器人语言。
On the base of analysing characteristics and components of robot languages, hybrid arc welding robot language(HAWRL) was presented.
介绍了基于80c 196kc为控制核心的激光雕刻机控制系统的硬件设计，实现对混合式步进电机和激光电源的控制。
The paper introduces the hardware design of the laser engraving based on 80c196kc, the control of step motors and laser power supply.
介绍了基于80c 196kc为控制核心的激光雕刻机控制系统的硬件设计，实现对混合式步进电机和激光电源的控制。
The paper introduces the hardware design of the laser engraving based on 80c196kc, the control of step motors and laser power supply.
应用推荐