混凝土结构设计原理是一门理论与实际紧密联系的课程。
The course of concrete structure design principle is a course closely combined theory with practice.
对混凝土结构设计安全度和规范的修订，提出了自己的见解。
To the concrete structure design degree of security and the standard revision, proposed own opinion.
钢筋混凝土结构设计包含构件尺寸的确定、结构分析以及构件设计。
The design of reinforced concrete structures requires the assumption of members dimensions, followed by analysis of the whole structure, then followed by the design of the members.
该方法适应了我国现行混凝土结构设计规范，便于工程设计人员掌握。
This method is in line with the current standard of concrete structure design of our country and is easy to grasp for engineering designer.
本文的研究成果对今后从事钢筋混凝土结构设计具有一定的参考价值。
The achievement has certain reference value in the structure design area of the reinforced concrete, in this thesis.
确定预应力筋布索方案是超长预应力混凝土结构设计的一项关键内容。
The tendon disposition option is an important part in the design of extra-long post-tensioned concrete frames.
本文介绍一个“钢筋混凝土结构设计”智能化计算机辅助教学系统的构思和实现。
This paper deals with the design and implementation of a Intelligent Computer-Assisted Instruction system for tutoring in reinforced concrete structure design.
但关于此类转换的方法和措施，现行的钢管混凝土结构设计和施工规程尚未涉及。
However, concrete construct measure and attention matters about such conversion are not referred in the existing design and construction regulation of the concrete-filled steel tubular structure.
本说明为本工程钢构部分说明，基础及钢筋混凝土部分详见混凝土结构设计说明。
The general notes herein are for steel structure work of This Project, and foundation and reinforced concrete work see concrete structure Design notes.
我国混凝土结构设计规范的安全设置水准与国际通用标准之间存在着相当大的差距。
As compared to design codes of practice in developed countries, the safety margin of structural members set in the Chinese Building Code for Concrete Structures is rather low.
应用该方法能合理、快捷的进行预应力混凝土结构设计，具有重要的工程实践价值。
It is a fast way in structural design of prestressed concrete based on this approach, and it has a vital practical value in project item.
从钢筋混凝土结构设计原理出发，分析截面弯矩、曲率、挠度、受压区高度之间的相互关系；
This paper studied the relationship among bending moment, curve, deflection and concrete compression height by design principle for reinforced concrete structure.
应用钢管混凝土结构设计规程，对钢管混凝土格构柱偏心受压试件进行面内整体承载力计算。
The in-plain ultimate load carrying capacity of concrete filled steel tubular(CFST) laced columns compressed eccentrically is calculated based on design guidelines for CFST structure.
按《轻骨料混凝土结构设计规程》JGJ12—99规程建议值进行锚固设计是偏于安全的。
The anchorage length of reinforcing bar embedded in lightweight concrete provided by "Specification for Design of lightweight Aggregate concrete Structure (JGJ12-99)" is safe.
可用《混凝土结构设计规范》（GB50010-2002）的公式估计其裂缝宽度，安全性高。
The formula in Code for design of concrete structures (GB50010-2002) can used to estimate the width of crack.
我国钢筋混凝土结构设计规范(TJ10—74)中未列出偏心受压构件刚度和裂缝的计算方法。
In our national Design Code of Reinforced Concrete Structures TJ10-74, there are no recommended methods for computing stiffness and crack of eccentrically loaded members.
“套箍强化理论”导出的钢筋混凝土承压强度计算公式，被我国各行业混凝土结构设计规范普遍采用。
The calculating equation for bearing strength of reinforced concrete, which is educed by the Theory of Hooping Strengthening, has been adopted in Design Code of concrete Structure.
我国钢筋混凝土结构设计规范中，钢筋混凝土受弯构件的刚度公式是在半理论半实验的基础上建立起来的。
In our national Design Code of Reinforced Concrete Structures, the stiffness formulas of Reinforced Concrete Flexural members were based on half theoretical analysis and half test result.
所建议的公式与短梁试验结果符合良好，并与现行《混凝土结构设计规范》(GBJ10- 89)有很好的衔接。
It is compatible with experimental results of short beams, and is in line with the current Chinese design code of concrete structure (GBJ10-89).
现行的钢筋混凝土结构设计规范GB50010—2002对于牛腿高度、水平纵向钢筋和箍筋的确定方法是偏安全的。
Current code for design of concrete structure (GB50010—2002) is relatively safe in setting down the corbel's height, horizontal longitudinal reinforcing steel bar and stirrup.
按照现行的《混凝土结构设计规范》GBJ10 - 89及《建筑抗震设计规范》GBJ11 - 89的要求建立了数学模型。
Mathematical model which complys with both codes of Concrete structure Design (GBJ10 89) and Antiseismic Constructure Design (GBJ11 89) is set up.
根据GB50010—2002《混凝土结构设计规范》规定的单向受弯构件正截面承载力计算方法确定梁的单向受弯正截面承载力。
According to GB50010-2002 Code for design of concrete structures, the normal section bearing capacity of reinforced concrete beam subjected to single bending is determined.
本指南所包括的是钢管混凝土结构设计的规范性条款，是根据中国建筑科学研究院1980至1986年期间完成的科研成果编制的。
This guide contains proposed code provisions for the design of concrete-filled steel tubular structures, which are based on the research in CABR during the years of 1980-1986.
以混凝土结构设计规范(GBJ10—89)为基础。建立了强力钢筋做预应力筋的预应力混凝土结构用名义拉应力控制裂缝宽度的方法。
Based on the design code of concrete structure (GBJ10-89), the paper gives the nominal tensile stress method of controlling crack width in prestressed concrete structure of punchy bars.
该文基于钢筋混凝土结构设计理论中的截面平衡方程和应力应变关系，为FRP板加固的钢筋混凝土梁的计算提供了行之有效的理论和方法。
Based on equilibrium equations and stress strain relationships, an effective theory and computational method for the analysis of RC beams strengthened with FRP plates are presented.
水泥混凝土路面的力学性能分析是路面结构设计的基本依据。
The study of the mechanical properties of cement concrete pavements is the base of the structural design of pavement.
沥青混凝土路面面层厚度和基层模量是路面结构设计中的重要参数。
Surface course thickness and base modulus of asphalt concrete pavements are important parameters in pavement structure design.
笔者对观音矶护岸整治工程的工程布置、结构设计、混凝土板施工、质量控制和工程完工后数年来的运行效果作了介绍。
Here, the general layout of revetment regulation works, the design of regulation structures, the construction of concrete slabs, the quality control for them and the treatment effect are described.
笔者对观音矶护岸整治工程的工程布置、结构设计、混凝土板施工、质量控制和工程完工后数年来的运行效果作了介绍。
Here, the general layout of revetment regulation works, the design of regulation structures, the construction of concrete slabs, the quality control for them and the treatment effect are described.
应用推荐