通过陶瓷压砖机液压系统试验，得到了各工作循环时的动梁运动曲线、主缸压力曲线、系统压力曲线和各伺服比例阀的控制信号曲线等试验数据。
By the hydraulic system test, we obtained the experimental data, such as the curves of the beam movement, pressure and valve's control signal and flow.
设计出传感器输入输出信号调理电路和试验台架液压激振系统、磁流变阻尼器控制器的功率放大电路。
Design the signal adjust circuit for sensor, and the power amplification circuit for the hydraulic pressure system of test platform and the controller of magnetorheological dampers.
试验证明，这些措施的采用，不仅提高了液压系统效率，而且使挖掘机的操纵性得到明显提高。
It has been proved in experiments that these methods not only improve the efficiency of the hydraulic system, but also the controllability of excavator.
对近年来液压系统的常规可靠性研究进行了简要的论述，主要有可靠性设计、可靠性分析和可靠性试验等。
Conventional reliability research on hydraulic system in recent years was reviewed, mainly including the reliability design, the reliability analysis and the reliability test etc.
本文较系统地介绍了液压元件试验台CAT系统的硬件和软件组成。
The hardware and software of CAT system for hydraulic devices are systematically presented in the paper.
设计了一台液压缸试验台，设计了其控制系统。
Design of a hydraulic cylinder test rig, designed their control system.
通过试验得到了输出位移曲线和压力曲线，同时较详细地讨论了影响液压伺服系统压力跃变的主要因素。
The displacement curve and pressure curve of outputting were got through test, the influences on servo hydraulic system about pressure jump were discussed in detail.
试验证明了该行走系统及皮带自动张紧装置中运用的液压自动控制技术的合理性及正确性。
Experiments have demonstrated the rationality and correctness of the hydraulic automatic control technique applied to travel system and belt automatic tensioning device.
其中，机械系统由试验台架、液压加载泵站、试验介质增压保压装置和传感器等部件组成；
The mechanical system is composed of testing mechanical assembly, hydraulic loading pump station, pressure increasing and holding device for tested media, and sensors.
我公司自主研发的1.5MW风力发电机组刹车液压系统完成试验并通过用户验收。
Our independently developed 1.5MW wind mill generator hydraulic brake system has finished its testing work and been accepted by customer.
这种液压系统设计的实现，为保证高压试验过程的安全提供了必要的条件。
The design of this hydraulic system ensures the safety of high pressure test.
在进行YZ 2003型振动压路机设计时，为使发动机水温和液压系统油温都获得最佳的冷却，对该机的散热系统进行了试验研究。
When designing model YZ2003 vibratory compactor, heat dissipating system was tested and researched in order to get best cooling for engine water and hydraulic oil of the machine.
实践证明采用均衡凝固收缩模数法设计液压试验平台浇冒口系统是可行的。
The practice shows that it is feasible to design kiss gating-feeder of hydraulic test platform by applying moduli calculation method.
论文介绍了海水液压作业工具系统的工作原理、关键技术问题及样机和试验结果。
In this paper, the working principles, advantages, key technical problems, prototype and experimental results of underwater tools driven by seawater hydraulics are introduced.
本文主要讨论的是该试验台液压系统的油温控制问题。
This paper mainly discusses the oil temperature controlling system for the test bed.
文中介绍了CAN接口电路设计s、JA1000 CAN控制器的初始化流程和液压综合试验台控制系统的设计。
It introduces the interface circuit design of CAN, Procedure of initializing of SJA1000 CAN controller and the design of hydraulic pressure colligation test-bed.
针对传统的机械闭式齿轮试验台存在的问题，设计了一种计算机控制液压加载系统。
Aiming at solving existing problems for the conventional mechanical close gear test platform, a computer controlled hydraulic loading system is designed.
液压泵特性试验对测试响应时间要求很高，因此建立一种合理的测试系统是非常重要的。
The characteristic test of hydraulic pump requires a high response, so it is important to design an appropriate test system for hydraulic pump test.
提出了液压泵流量脉动测试的实用近似方法，对液压柱塞泵流量脉动的测试技术进行了系统的试验研究。
The paper describes an overall experimental research on the techniques for measuring the flow ripples of hydraulic piston pumps, according to the practical method for measuring pump flow ripples.
本文主要介绍海水液压泵试验台的液压系统组成、测试方法及其设计特点等内容。
The composition, survey method and design characteristic of the sea water hydraulic pump test stand's hydraulic system are introduced.
介绍采用变频调速和功率回收加载技术的新型矿用液压泵和液压马达试验系统，并有应用实例。
The paper introduces an advanced hydraulic pump/motor tester for mine, combining frequency-modulated control with power recovery techniques, and an engineering application example is given.
本文提出了液压万能试验机数字电液比例控制系统的设计与控制方法。
The design and control methods of a new digital electrohydraulic proportional control system for hydraulic universal testing machine is presented.
本文在计算机技术和液压伺服控制技术的基础上对多通道汽车疲劳试验台测控系统进行了深入研究和设计。
This dissertation is lucubrating test and control system of motor fatigue test rig based on computer technology and hydraulic servo control technology.
本文讨论采用计算机集散系统，对“液压油泵试验台”进行智能检测、控制和管理。
The paper discusses the intelligent survey, control and management of hydraulic pressure oil pump testing platform by means of the computer distributing system.
利用计算机及液压伺服控制技术，研制了大型液压伺服混凝土静动三轴试验系统。
Large scale static and dynamic concrete hydraulic servo triaxial testing system is designed by using computer and hydraulic servo technique.
本文对传统的液压泵试验台测试系统进行了改造，建立了一套基于虚拟仪器技术的集信号采集、分析、存贮等功能为一体的液压泵自动测试系统。
An automatic testing system for traditional hydraulic pump test - bed was sel up, which includes such functions as signal acquisition, data storing and analysis based on virtual instrument technique.
液压脉冲试验是飞机液压系统设计中的重要环节。
Hydraulic impulse test is the important aspect in the design of airplane hydraulic system.
根据其液压伺服系统特点提出了P DF控制策略，并在建立控制系统模型的基础上进行了仿真试验。
According to the feature of hydraulic servo system, the PDF control strategy is proposed, and simulation test is done based on the setup of control system model.
根据其液压伺服系统特点提出了P DF控制策略，并在建立控制系统模型的基础上进行了仿真试验。
According to the feature of hydraulic servo system, the PDF control strategy is proposed, and simulation test is done based on the setup of control system model.
应用推荐