技术规定还要求每一辆赛车都具有交叉双回路液压制动系统，也就是前后轮使用互不干扰的储油器。
The technical regulations also require that each car has a twin-circuit hydraulic braking system with two separate reservoirs for the front and rear wheels.
技术规定还要求每一辆赛车都具有交叉双回路液压制动系统，也就是前后轮使用互不干扰的储油器。
The technical regulations also require thateach car has a twin-circuit hydraulic braking system with two separatereservoirs for the front and rear wheels.
能按设计要求对液压控制系统的装配、调试等生产过程进行检验。
Be able to inspect process like production assembly and commissioning of hydraulic control system as per requirement.
翼型会员根据权利要求1，不包括任何电动马达连接到说，皮瓣及不包括任何液压系统连接到说皮瓣。
The airfoil member according to claim 1, excluding any electric motor connected to said flap and excluding any hydraulic system connected to said flap.
因此人们越来越重视对其的控制，特别是对于精度要求非常高的液压伺服控制系统来讲，污染控制显得更为重要。
People have recognized to control the oil pollution more and more, especially for the hydraulic pressure servo controlling system which has the high precision demand.
由于其液压系统相对复杂，控制精度高，所以对LS等控制管路，必须提供足够的油液，以满足其控制要求。
As its complex hydraulic system and high precision control, LS and other control lines must provided enough oil for control device demand.
介绍黄海客车6181S02所用伊卡露斯铰盘及其液压控制系统的安装及工艺要求。
The paper introduces the requirements of installation and process of Ikarus articulator and its hydraulic control system equipped in Huanghai bus 6181S02.
论述船用克令吊液压油的各项性能要求及使用过程中的油质判断、系统放气和质量检查操作细节。
Feature requirements of the hydraulic oil for Marine cranes are discussed in this paper, as well as the operating details of oiliness judgment and inspection. gas releasing of the system etc.
在液压控制系统中，采用传统的PID控制策略难以达到高精度的要求。
In a system of the hydraulic control, it is difficult to reach the request of high degree of accuracy using the traditional PID strategy.
其液压系统采用伺服比例控制技术，简单实用，满足了生产要求。
The servo-proportional control technique is adopted in its hydraulic system. The system has reached production requirement with simplicity and practicability.
针对兆瓦级水平轴变桨距风力发电机的控制要求，设计了变桨距液压控制系统。
According to the controlling requirement of megawatt wind driven generator with variable propeller pitch of horizon axis, the hydraulic control system of a variable propeller pitch is designed.
该油可同时满足大功率拖拉机和工程机械传动-液压系统的使用要求。
This oil can be used in both transmission and hydraulic system in high-power tractors and engineering machinery.
工程调试结果表明，该系统设计达到了设计要求，对飞机液压能源系统设计具有重大意义。
Engineering experiment results show that the system designed can meet the design requirements, and has great of values for the design of aircraft hydraulic energy systems.
本文根据CSP工艺的技术要求，研究分析了活套控制装置及控制系统，介绍了液压活套的结构和功能，以及自控原理。
According to the CSP process requirement, the looper control device and control system including its structure, function and auto-control principle is researched.
介绍了一种实用、简化的液压牵引采煤机的电控系统，以适应现场使用要求。
This article introduces a practicable and simple electrical control system of the hydraulically hauled shearer to meet the site operation demand.
液压泵特性试验对测试响应时间要求很高，因此建立一种合理的测试系统是非常重要的。
The characteristic test of hydraulic pump requires a high response, so it is important to design an appropriate test system for hydraulic pump test.
本文就模具研配液压机的双缸同步与精停液压回路进行了研究，设计了能满足生产要求的同步系统。
The paper has studied into the hydraulic system of two cylinders synchronization and accurate orientation, then designed the synchronized system that could meet the requirement.
本论文针对其走行系统的要求，进行了新型铺轨机组走行系统液压系统设计、液压系统控制技术研究以及对走行液压控制系统模拟仿真。
The main content of this paper is the hydraulic system of the machine running department, the research of the control system and the simulation of the running hydraulic control system.
因此，设计液压系统时，在满足使用要求的前提下，还应充分考虑降低系统的功率损失。
Therefore, the design of hydraulic systems, to meet the application requirements under the premise of the system should also give full consideration to reduce power loss.
仿真结果表明：除雪车液压系统能满足各项性能要求，除雪车能正常、稳定的工作。
The simulation result reveals that the hydraulic system of snow removal vehicle can meet all performance requirements and the snow removal vehicle can work safely and stably.
优化的液压系统设计和精简的产品部件，降低了机器的维护要求和成本。
The optimized design of the hydraulic system and the targeted reduction of the number of components minimize the maintenance and training requirements for maintenance crews.
为了满足液压泵站复杂灵活的控制要求，采用PLC改造了液压泵站原来的继电器控制系统。
In order to meet the requirement of the complicated and flexible control of hydraulic power unit, its electrical control system is rebuilt by PLC.
方案论证部分，我按照技术要求，对液压系统进行了分析，并设计了一套液压控制系统。
Programme appraisal part of the question, I analysed the hydraulic system in accordance with the technical requirements, and to design a set of hydraulic control systems.
这种液压锁能满足采煤机的工作要求，改善调高系统的工作性能和可靠性。
This lock can satisfy the working demand of shearers and improve the working function and reliability of the height adjusting system.
论文分析研究了试验台的传动系统方案和原理，认为试验台采用液压-机械传动方案是切合实际并符合总体方案要求的。
By analyzing the principles and the plan of driving system, this result shows that MFEP's hydraulic-mechanical drive program is practical and consistent with the overall program requirements.
液压系统向连铸机升降驱动辊供给的液压压力应根据工艺要求进行设定计算。
The hydraulic pressure which hydraulic system provides to the pinch roll in CC machine should be set-up and calculated according to CC process requirement.
可根据客户参数要求，设计定做各类用途的液压系统、动力单元。
According to customer requirements, parameters can be design custom make all kinds of used?
在提高液压系统本身的工作性能和功能的前提下，小型注塑机液压系统的优化设计更能满足加工工艺要求，保证注塑机的功能发挥，具有广泛的适应性。
Optimization design of hydraulic system for small-sized injection molding machine is better in line with processing technology, and ensures the function of injection molding machines.
在提高液压系统本身的工作性能和功能的前提下，小型注塑机液压系统的优化设计更能满足加工工艺要求，保证注塑机的功能发挥，具有广泛的适应性。
Optimization design of hydraulic system for small-sized injection molding machine is better in line with processing technology, and ensures the function of injection molding machines.
应用推荐