介绍了加氢装置气液分离器的工作原理。
The working principle of gas liquid separator for hydrogenated unit was recommended.
然后进行的是气液分离器及缓冲器的设计。
Then what to carry on be the design which annoys the liquid separation machine and buffer.
并提供了氨液分离器安装高度的一种计算方法。
And also provides a method to calculate the installation height of ammonia liquid separator.
同时，研究了汽液分离器分离出的饱和水的热能综合利用技术。
It also studies the comprehensive utilization of thermal energy of the saturated water separated from the vapour liquid separator.
针对常规离心式分离器进行结构改进，开发出新型离心式气液分离器。
Aiming at the improvement on the structural of the ordinary centrifugal separator, a new centrifugal separator for gas-liquid separation was developed.
整个设备可分为加热蒸发室、加热夹套、汽液分离器、搅拌器等四部分。
This equipment is composed by four parts: evaporation room, heating jacket, vapor-liquid separator and stirring device.
为了提高离心式气液分离器的分离效率，需对其结构参数作进一步分析。
In order to improve the separating efficiency of the centrifugal gas-liquid separator, it is necessary to carry out a further analysis on the structural parameters.
为了减少气体对泵的影响，提高抽油泵泵效，研制了井下复合式气液分离器。
In order to reduce the influence of gas on pumps and improve the pumping efficiency, a combined downhole gas-liquid separator is developed.
为了预防这种情况，研制了一种结构简单、体积小、效率高的旋流气液分离器。
In order to prevent such a situation, a highly efficient and swirling gas-liquid separator with simple structure is developed.
在热泵系统四通换向阀后的排气管上加旁通毛细管和在气液分离器中加过冷管。
A by-pass capillary tube was added on the discharge pipe behind the four-way valve and a tube was added in an accumulator in a heat pump system to solve the problem.
而组件单元装置是由框式中空纤维膜组件、框式换热组件、气液分离器组成的。
A unit device consists of frame type hollow fiber membrane units, frame type heat exchange units and gas-liquid separators.
主要产品有：各种小机型机组的冷凝器、蒸发器、气液分离器、油分离器等。
The main products are: a variety of small models of the condenser units, evaporator, gas-liquid separator, oil separators and so on.
轴流导叶式气液旋流分离器与其他离心式气液分离器比较，其特点是阻力损失小。
In comparison with other centrifugal gas-liquid separators, the resistance loss of the axial flow guide vane type gas-liquid cyclone separators was less.
本文利用污泥回流方法进行了烧杯实验，并开展了高效固液分离器的动态实验研究。
In this paper, beaker experiment was done by methods of sludge return, and carry out a highly efficient solid-liquid separation study of the dynamic test.
在扩大端部，能够高效分离制冷剂蒸气和制冷剂液，能够提高气液分离器的分离效率。
Refrigerant vapor and refrigerant liquid are efficiently separated from each other at the expanded end section, and this improves separation efficiency of the gas-liquid separator.
实践证明合理地设计及应用气液分离器，对提高空调产品的可靠性具有十分重要的意义。
Practice proved that design and apply the gas-liquid separator legitimately have a very important signification to improve the reliability of air conditioner product.
气液分离器：安装在排气管路上用以实现压缩气体与工作液的分离，分离器属压力容器。
Liquid-vapor separator: it is installed on the exhaust pipe line to separate the compressed gas from treatment fluid, the separator is a pressure vessel.
在综合分析切割粒径、压降、效率和分股比数学模型的基础上，建立了旋液分离器的设计模型。
Based on synthetically analyzing models of reduced cut size, pressure drop, efficiency and flow split, the design model of hydrocyclone separators has been developed.
工业应用也表明，采用双层套筒出口结构的气液分离器具有较高的除酸雾效果，优于原分离器。
The industrial application showed that the mist swirl separator with the optimized exit structure had higher separation efficiency than that of the original design.
结果表明：使用了快速预冷汽液分离器后，探针预冷时间大大缩短，并随驱动压力增大而减小；
The results show that the precooling time of the probe is shortened significantly with the help of the vapor-liquid separator, and decreases with the driven pressure.
产品包裹干燥过滤器、气液分离器、油液分离器及各种冷风机、冷凝器用的风叶、网罩等系列。
Products including dry filters, steam fluid separation devices, oil separation devices, every kinds of cold wind machine, fan's leaf and net-caps used in condensers.
本实用新型涉及一种气液分离器，特别涉及一种用于轻工造纸行业中纸机湿部的真空脱水系统。
The utility model relates to a gas-liquid separator, in particular to a vacuum dewatering system which is applicable to the wet part of a paper machine in the light papermaking industry.
采用本系统，可以大大提高现场信号的实时监测，保证气液分离器顶部不翻塔、不跑液、底部不串气。
Uses this system, greatly enhanced the scene signal real-time monitor, guaranteed was mad the fluid separator crown does not turn the tower, does not run the fluid, the base not hernia.
在压缩机吸气口增加气液分离器是解决这个问题的有效办法，尤其是在采用逆循环热气除霜的热泵机组中。
In the compressor suction mouth increase a gas-liquid separator is the effective way to solve this problem, especially in the inverse heat cycle defrosting the heat pump units.
跨临界二氧化碳制冷系统节流控制机构，主要包括节流阀、汽液分离器、电磁阀、混合器、热力膨胀阀等。
The throttle control mechanism of cross-critical CO2 refrigerating system includes mainly throttle valve, vapor-liquid separator, solenoid valve, mixer thermal expanding valve, etc.
对丝网气液分离器的分离机理进行了详细分析，在此基础上给出了丝网气液分离器的分离效率和压降计算公式。
Based on the analyzing the separation mechanism of wire mesh demister, the formulae for calculating the separation efficiency and pressure drop of wire mesh demister have been proposed.
结果表明，用此简化计算公式计算的结果与试验数据基本一致，可以用于螺旋片导流式气液分离器螺旋结构设计计算。
The results show that the values from this simplified calculation formula is consistent to the test data and it can be used to design the spiral structures.
本发明公开了一种旋转式压缩机的气液分离器装置，包括具 备一定的内部空间的气液分离器，其上端连接制冷剂管的壳体；
The gas-liquid separator for rotary compressor includes a gas-liquid separator casing with certain inside space and upper end connected to the refrigerant pipe;
段塞流捕集器和生产分离器分出的凝液进入凝析油稳定单元进行稳定，生产稳定凝析油产品。
Condensate separated from slug catcher and production separator enters into stable state condensate unit to produce stable state condensate products.
段塞流捕集器和生产分离器分出的凝液进入凝析油稳定单元进行稳定，生产稳定凝析油产品。
Condensate separated from slug catcher and production separator enters into stable state condensate unit to produce stable state condensate products.
应用推荐