介绍了液体硅橡胶的成型工艺、成型设备及其特点。
Liquid silicone rubber injection process, equipment and characteristics were reviewed.
介绍了液体硅橡胶的成型工艺、成型设备及其特点。
The fine performances of liquid silicone rubber products and the significance of developing the technique were pointed out in this paper.
通过添加增粘剂，制得与金属基材具有较好粘接性的加成型液体硅橡胶。
The addition cure LSR with good adhesion with metal was prepared by adding adhesion promoters.
研究了硅硼增粘剂和钛酸酯增粘剂对加成型液体硅橡胶的黏度和粘接性的影响。
The effects of silicon-boron and titanate adhesion promoter on the viscosity and adhesion of the addition cure LSR were studied.
液体硅橡胶注射成型对电缆本体有恒定的收缩的收缩压力，与电缆同“呼吸”局部放电最低。
Liquid silicon rubber injection moulding has constant cooling pressure to the cable. It is Low in electricity output while "breathing" together the cable.
电子工业用加成型液体硅橡胶灌封料的关键技术指标为：胶料黏度、硫化胶力学性能和电性能。
The key properties of additional liquid silicone potting material in electronic industry are viscosity, mechanical property and dielectric property.
介绍液体硅橡胶用作防火工艺夹板门模具的胶料配方、工艺和产品性能，该产品获得用户认可。
The pater introduces the compound recipe, technology and product performance of mold made from fluid silicone rubber for split door for fire proof technology. The product has the approval of consumer.
公司主要从事APG环氧树脂压力凝胶，液体硅橡胶成型产品的研发、设计、生产、销售与服务。
Corporation is mainly engaged in the APG epoxy resin pressure gelatin, the liquid silica gel formation product research and development, the design, the production, the sale and the service.
液体硅橡胶与各种基材具有良好的粘接性，液体硅橡胶的低粘度能消除机械压力对复合基材的不良影响。
LSR has good adhesiveness with all kinds of baseplates; And the low viscosity of LSR can eliminate the bad effect of the mechanical pressure to the composite baseplates.
简要介绍了加成型液体硅橡胶的卓越优点，叙述了近年来开发的几种新型加成型液体硅橡胶性能及其应用。
The basic material, additive and promoter, catalyst, vulcanization mechanism, and application of the addition type liquid silicone rubber were summarized in this paper.
简述了国内外硅橡胶(高温硫化型硅橡胶、室温硫化型硅橡胶、液体硅橡胶等)在电气绝缘方面的应用情况。
The application and progress of HTV silicone rubber, RTV silicone rubber and liquid silicone rubber to electrical insulator were introduced.
工业用高性能泡绵、微细孔聚氨脂泡沫材料、多孔硅泡沫材料、液体硅橡胶、高频印刷线路板材料、柔性印刷线路板材料。
Industrial high performance foams fine celled polyurethane foams cellular silicone foams liquid silicone rubber high frequency circuit materials flexible circuit materials.
液体硅橡胶（LSR）具有独特的物理性能，通过液体硅橡胶注射模设计实例，分析了其注射模设计中应注意的几个问题。
The liquid silica rubber(LSR) had unique physical performance, through the liquid silica rubber injection mold design example, analyzed several attention points in designing injection mold.
植入盐水、硅橡胶外壳有无菌生理盐水充满液体。
Saline implants, which have a silicone rubber shell filled with sterile saline liquid.
用液体丁腈橡胶、聚丁二烯、聚醚、硅橡胶、不饱和聚酯和多种乙烯基酯树脂为改性剂，研究了它们对DAIP树脂的增韧作用。
The toughening of DAIP resin with liquid nitrile-butadiene rubber, polybutadiene, polyether, silicone rubber, unsaturated polyester and vinyl resins was investigated.
并介绍了真空浇注成型和液体注射成型等硅橡胶加工的新技术。
The new techniques in vacuum casting molding and liquid injection molding of silicone rubber were also described.
本论文采用液体法、固体法和硅橡胶法三种不同的方法制备有机硅泡沫材料，分析了三种制备方法的反应机理。
There are three ways, which include liquid, solid and rubber, to make silicone foam, analyzing the reaction principles in preparation of silicone foam.
采用液体有机硅橡胶与低分子液态环氧树脂和聚醚共混改性的方法，制备了有机硅改性聚醚环氧树脂。
In this paper, the silicone modified polyether epoxy resin was prepared using silicone rubber, liquid epoxy resin and polyether by the method of blending modification.
采用液体有机硅橡胶与低分子液态环氧树脂和聚醚共混改性的方法，制备了有机硅改性聚醚环氧树脂。
In this paper, the silicone modified polyether epoxy resin was prepared using silicone rubber, liquid epoxy resin and polyether by the method of blending modification.
应用推荐