通过正交试验，研究了各因素对真空实型铸造铸钢件涂料的透气性、干强度、剪切力、悬浮性的影响。
In this paper, the influence of various parameters on suspension shearing dry strength and permeability of EPC coating used on steel casting through right Angle test was studied.
该涂料可室温固化，并有着优良的附着力和耐冲击强度。
The coating can be solidified at room temperature, with excellent adhesion and Impact strength.
介绍了影响涂膜遮蔽裂缝宽度的因素，提高丙烯酸涂料抗裂强度的方法，以及施工中须注意的问题。
Factors influencing the ability of film for crack masking, methods improving the crack -resistant strength of acrylic paint, and cautions in applications are introduced respectively.
砂芯脱盒至浸涂料的放置时间、浸涂料后不同的干燥方法及不同涂料对砂芯的强度都有不同程度的影响。
The time from pattern removal to coating, different drying methods and coatings will have different effects on strength of core.
同时用涂料标准方法测定了这些样品的漆膜的表干时间、光泽值、冲击强度、附着力、柔韧性等。
Film properties including surface drying time, luster value, shock strength, adhesion and flexibility were tested according to standard methods for coating.
消失模铸造用水基涂料的综合强度性能对实际生产有重要影响。
The comprehensive strength property of EPC water-base coating has an important influence on casting quality in practice production.
该发光涂料环境友好，而且比相应的发光材料具有更长的余辉发光时间和更高的发光强度。
The coating is environmentally friendly and has longer luminescence afterglow time and higher luminescent intensity than corresponding luminescent powder.
纳米涂层、纳米涂料具有良好的耐磨性、抗老化性、高粘接强度以及奇特的电、光、磁、热等性能。
Nanometer coat and coating material has good wearing resistance, anti - aging performance, high adhesive strength and wonderful electric, light, magnet and heat characteristics.
研究了涂料层中不同耐火粉料及粘结剂等因素对涂层强度的影响。
Some factors affecting coating strength, such as refractory and binder, were studied.
涂料中胶粘剂的用量直接影响纸张的印刷表面强度、白度、不透明度、光泽度和吸收性。
The surface strength, brightness, opacity, glossiness, and absorbency are influenced by the amount of binder in the coating.
针对干砂消失模铸造用涂料具有高透气性、高强度的特点，研制了一种涂料透气性、强度专用测量装置。
According to the characteristics, which coatings used in EPC are of high permeability and strength, a special device used to measure the strength and permeability is worked out.
并对大型钢锭浇注的热环境进行模拟，考察涂料高温强度的变化情况。
And a large steel ingot casting simulation of the thermal environment to study the changes in coating high temperature strength.
介绍了涂膜拉伸强度、断裂时的延伸率，防碳化效应特性试验以及弹性外墙乳胶涂料施工应用技术。
Tests on film tension strength, elongation rate at breaking, anti carbonation effect etc. and applied technique of elastomeric latex coating for exterior wall are described.
紫外固化光纤缓冲层涂料性能，主要考虑的是缓冲层涂料的光固化速度、缓冲层的强度、缓冲层的剥离力及缓冲层的附加损耗等性能。
As for the performance of UVcured optical fiber buffer coating, the main concerns are the curing speed, strength, stripping force and additional loss of the buffer layer.
介绍了抗腐蚀高强度耐磨涂料的研制和开发，以及用作柳钢球团回转烘干机刮板保护涂层的应用效果。
The development and application of corrosion-resistant and high strength and abrasive-resistant coating as well as it effects on the scraper of pellet rotary dryer in Liugang were introduced.
涂料的急性吸入毒性强度分级和它们引起的病理形态学改变能有效地判断不同种类涂料的毒性大小。
The toxicity of different kinds of coating can be efficiently identified by the acute inhalation toxicity classification and pathological findings described in this paper.
胶乳在涂料中起到粘接颜料粒子及颜料与纸基的作用，增强涂层强度。
The main function of latex is to bond pigment particles, then to build up the film strength.
同时研究了涂料的粘附强度、防裂、防剥落等措施。
The adhesion strength and stripping and splitting prevention measure were also discussed.
研制了一种抗锈蚀耐磨损复合导电涂料，该涂料具有较好的导电性、 耐磨性和一定的强度。
The paper introduces a method of developing composite paint. The paint have good electric performance, enough abrasion resistant and certain intensity.
结果表明，采用pva有机粘结剂的涂料常温强度高于硅溶胶无机粘结剂涂料的常温强度。
The experimental results show that the coating has higher strength contained PVA organic binder than con - tained colloidal silica inorganic binder at room temperature.
研究结果表明： 防热涂料的剪切强度分散性较大，这主要是由于溢胶现象使得搭接长度的准确测量比较困难，同时造成了试件的对中性较差。
The results show that the data of shear strength are discrete. The main factor is the overflow dope that causes the lap length to be measured difficultly and the centerline disagree.
该产品在涂布纸的面涂涂料中应用，能明显增强涂布纸的表面强度，提高纸张涂布光泽度。
The product is applied in coating paper surface paint, can obviously strengthen the surface strength of the coating surface and improves paper coating glossiness.
结果表明：1）有机粘结剂一般可以提高涂料的常温强度，但会破坏涂料的高温强度；
The experimental results show, 1) the room temperature strength of coating can be raised by organic binders, but tb'ey always have harmful influence on bonding strength at elevated temperatures;
本发明涉及高强度乳胶化涂料及其配制方法，属于建筑材料技术领域，适合于作内外墙壁涂料。
The present invention relates to the technology field of building material, and the paint is suitable for use in both outer and inner walls.
本发明抗压强度高，涂料较硬，不易脱落，产品的导热系数较小，保温性能良好。
The invention is high in compressive strength, good in hardness and not easy to fall off; the product has small coefficient of thermal conductivity and good thermal conservation performance.
本发明抗压强度高，涂料较硬，不易脱落，产品的导热系数较小，保温性能良好。
The invention is high in compressive strength, good in hardness and not easy to fall off; the product has small coefficient of thermal conductivity and good thermal conservation performance.
应用推荐