该方法所得涂层结合强度高，耐蚀、耐磨性好，具有广阔的应用前景。
The coating made by this method exhibits good coherence, excellent corrosion resistance, wear resistance and has wide application in future.
高速电弧喷涂镍铝涂层结合强度高，涂层组织致密，是优良的打底涂层。
It was proved that high velocity arc spraying Ni-Al coating is one of best intermediate coatings with high adhesive strength and fine structure.
在试验的喷距范围内，喷距对粉末的熔化状态和涂层结合强度均无明显影响。
The melting state of powder and bonding strength of coating did not vary much within...
在试验的喷距范围内，喷距对粉末的熔化状态和涂层结合强度均无明显影响。
The melting state of powder and bonding strength of coating did not vary much within spraying distance in the experiment.
采用两步烧结法烧成的钛合金牙种植体表面与复合涂层结合强度及结合机理。
The mechanism and integrating strength of the composite coating with the surface of cobalt alloy dental implant made by a two-step-sintering method were studied in this paper.
而喷涂电流对涂层结合强度的影响因受喷涂电压的制约呈二次抛物线规律变化。
However the affection of spray current assumed quadratic parabola regularity because of the spray voltage.
它增加纸张的光泽度，平滑度和涂层结合强度颜料粒子相互以及基本文件和填充粒子之间的空隙。
It increases paper gloss, smoothness and strength by binding coating pigment particles to one another as well as to the base paper and by filling the voids between particles.
背景：稀土元素具有一定的生物效应，也有广谱抗菌、抗炎和抗病毒的能力，能提高涂层结合强度作用。
BACKGROUND: Rare earth elements have some biological effects, and broad-spectrum anti-bacterial, anti-inflammatory and anti-virus capabilities, they can increase the bonding strength.
火焰喷涂具有设备简单、使用方便、操作成本低的特点，但它的涂层结合强度低，气孔率及氧化物含量高。
Flame spray possesses the characteristics of simple equipment, easy of use and low operating cost, but the coating adhesive strength is low, and porosity and oxidation is high.
采用正交设计方法和通过极差分析研究了电弧喷涂工艺参数对J CW - b涂层结合强度和耐磨性的影响。
The influence of arc spraying parameters on the adhesive strength and wear-resistance of JCW-B coating was studied by orthogonal design test and extreme analysis.
结果表明：采用粗粉末喷涂后得到的涂层结合强度较高，结晶程度也较高，但涂层与基体的结合机制仍为机械嵌合。
Results indicate that the coatings deposited by the coarser powder have higher shear strength and more crystalline hydroxyapaptite. The mechanical bond plays a dominant role …
结果表明：采用粗粉末喷涂后得到的涂层结合强度较高，结晶程度也较高，但涂层与基体的结合机制仍为机械嵌合。
Results indicate that the coatings deposited by the coarser powder have higher shear strength and more crystalline hydroxyapaptite. The mechanical bond plays a dominant role in the interface j…
采用拉开法测定了PPS/FEP共混改性防腐涂层的结合强度，研究了共混组分PPS对复合防腐涂层结合强度的影响。
The bongding strength of blended PPS/FEP anti-corrosion coatings was determined by pull-off test. The effects of the blending component PPS on the bongding strength were studied.
在无氧铜的基体上制备了等离子喷涂钨基涂层以应用于核聚变反应堆中偏滤器部件的面向等离子体材料。比较了不同过渡层对等离子喷涂钨基涂层结合强度的影响。
The plasma sprayed tungsten coatings were prepared on oxygen free copper substrates, which are to be used as the plasma-facing materials of the divergent components in fusion reactors.
具有表面梯度磷灰石涂层的多孔钛有望用于临床矫形，以提高种植体的生物活性和骨结合强度。
The porous titanium coating with the graded apatite is expected to be applied in clinical orthopedics to enhance bone implant bonding strength.
在碳钢表面制备了具有梯度结构的PPS/FEP复合防腐蚀涂层，采用拉开法测定了各涂层体系的结合强度。
The gradient PPS/FEP composite anti-corrosive coatings were prepared on carbon steel. The bonding strength of all coating systems was determined by the pull-off test.
涂层与骨组织之间的结合强度用推出实验进行测量。
The bond strength between bone and titanium coatings was also measured by push-out test.
并且针对热扩散对涂层的结合强度及组织的影响分别进行了论述。
The effect of the hot diffusion on the bonding strength and the microstructure of the coating was individual discussed.
热喷涂层与基体的结合强度是衡量涂层质量的重要指标。
The bond strength of thermal sprayed coating is an important part for evaluating the quality of coating.
涂层与基本的结合强度与基体清洁度和粗糙度有关。
Coating with the underlying bond strength with the matrix on the cleanliness and roughness.
界面压入法适合于评价高结合强度的涂层。
This interfacial indentation method is suitable for use in those coatings with high bonding strength.
以此测量了铁基涂层的结合强度，证明了方法的有效性。
The bond strength of an iron-base coating material was measured and the validity of the method was proved.
研究了试验参数对涂层界面结合强度的影响以及阳极氧化状态参数对钛基体表面形貌的影响；
The effect of the experimental parameters on the interfacial bonding strength was investigated, as well as the influences of the anodic oxidation state on the titanium substrate surface appearance.
但预热温度不宜过高，以免引起基体表面氧化而影响涂层与基体表面的结合强度。
However, the preheating temperature should not be too high, so as to avoid matrix effects of surface oxidation and surface coating and the substrate bonding strength.
选择喷涂工艺参数的主要原则是提高涂层与基材的结合强度。
Choose spraying process parameters are the main principles of the coating and improve the bonding strength of the substrate.
涂层与基体的剪切结合强度是评定涂层质量的重要指标，也是进行制造工艺优化的依据和基础。
Adherent strength of shearing is an important criterion in evaluating the quality of coating layers, and it is also the foundation to optimize manufacturing.
本文对钛合金表面不同类型涂层的设计进行了综合评述，并对如何提高生物活性陶瓷涂层与基体的界面结合强度提出建议。
The design of different kinds of coatings on titanium alloy was overviewed and some Suggestions on how to improve the bonding strength between bioactive ceramic coating and substrate were made.
已经证明在多孔钛表面制备HA涂层后，能提高骨生长速度及结合强度。
There is evidence that the ha layers on the porous Ti can accelerate the bone growth and enhance the bonding strength.
生物力学实验结果表明，使用羟基磷灰石涂层，可以显著提高骨组织与种植体的界面结合强度。
It was revealed by push out test that the hydroxyapatite coating greatly prompt the bonding strength between implant and surrounding hard tissues.
研制的等离子喷涂专家控制器可实现对常用喷涂粉末的稳定喷涂并获得均匀致密和高结合强度的等离子涂层。
Stable spraying process and uniform and compact coating with high adhesive strength can be obtained by using the expert controller.
应用推荐