本文对热塑性复合材料用预浸料的结构及其在复合材料成型加工中的浸渍性能进行分析。
In this paper the structures and matrix impregnating behaviours during composites forming of intermediate materials by fiber mixing for thermoplastic composites were investigated.
该树脂具有阻燃性和透光率较好的特点，并且粘度小，对布的浸渍性能好，适合手糊成型工艺与无碱布配合生产。
The flame retardant resin with good transmittance and the characteristics of small and viscosity of the cloth impregnated performance and suitable hand with the E-Paste Process with cloth production.
为满足某些特殊加工要求，气孔内还可以浸渍某些填充剂，如硫黄和石蜡等，以改善磨具的使用性能。
In order to meet some special processing requirements, can also be impregnated within the pores of certain fillers, such as sulfur and paraffin, so as to improve the use of abrasive performance.
利用湿热试验、盐水浸渍试验及电化学测试方法评价了膜的耐蚀性能。
The anticorrosive property of the conversion film was examined intensively by moisture and heating test, salt solution immersion test and electrochemical method.
论述将纳米复合材料通过浸渍涂层的方法整理到棉织物及服装产品上，使其具有抗紫外线性能。
This paper is related to the method of coating cotton fabric and apparels by used of the nano composite materials for the UV blocking function.
用浸渍法制备了蒽醌法生产过氧化氢工艺过程中蒽醌加氢用负载型铂催化剂并测定了其催化性能。
Supported Platinum catalysts for anthraquinone hydrogenation were prepared by impregnation method and their properties in anthraquinone hydrogenation were studied.
本文主要研究了浸渍压密石油焦对预焙阳极块结构与性能的影响。
The influence of impregnated and compressed petroleum coke on structure and performance of pre-baked anode has been studied.
采用一种新的熔融浸渍工艺制备了长玻纤增强尼龙6复合材料，研究了玻纤含量、玻纤长度分布对复合材料力学性能的影响。
The long glass fiber reinforced PA6 was prepared by using a new melt impregnation process. Influences of the glass fiber content and distribution to the composite were studied.
以CO氧化为探针反应，考察了不同制备方法对CO氧化性能影响，结果表明共浸法制备的各催化剂其活性明显优于连续浸渍法。
Influences of different preparation methods on CO oxidation have been studied. It was found that catalysts prepared by co-impregnation method were superior to those of the sequential one.
初步尝试采用浸渍法改性聚四氟乙烯薄膜，对薄膜的拒油性能、微孔结构及孔隙率进行了讨论。
Initially, impregnation method was attempted to use for the modification of PTFE membranes, discussing the oil repellent performance, microporous structure and porosity.
浸渍强化处理是提高反应烧结氮化硅性能的有效措施。
Infiltration strengthening is an effective means to improve the mechanical properties of Reaction Bonded Silicon Nitride(RBSN).
研究了气相氧化、氢氧化钾浸渍对IER炭化行为及SAC的结构、表面官能团及其吸附性能的影响。
The effects of oxidation and KOH impregnation on the carbonization behaviors of IER as well as on the structure, surface functional groups and adsorptive property of the resultant SAC were studied.
材料性能随浸渍次数增加而优化，浸渍4次的显气孔率和吸水率最低，体积密度和热稳定性最高。
The apparent porosity and water absorption were the lowest, the bulk density and heat-resistant property were the highest after dipping for 4 times.
与金属浸渍石墨密封材料相比，其性能更为优良，使用寿命提高4—6倍。
Their properties are better than those of metal-impregnated graphite sealing materials and their lifetime is increased by 4-6 times compared with the latter.
实验结果表明：浸渍顺序对催化剂性能有明显的影响，经过磷改性后的催化剂具有较好的芳构化性能。
The experiment result showed that the capability of catalyst was obviously infected by the dipping order, and the catalyst modified by phosphorus had better aromatization capability.
浸渍工艺保证了燃料电池的性能。
采用浸渍法制备钴基催化剂，考察了催化剂组分浸渍次序对其F-T合成反应性能和产物分布的影响。
The effects of component impregnation sequence on catalytic performance and product distribution for Fischer-Tropsch synthesis are studied.
为了改善箔式电容器的抗电性能，对切割、卷绕、热压、焊接和浸渍工艺进行了研究。
To improve electric function of the foil type capacitors, the processing cutting, winding, hot-pressing, welding and immersion was investigated.
试验结果表明，经浸渍处理的成品胶合板的环保、阻燃性能均不理想，很难达到环保、阻燃的要求，试验中氧指数最高为38%。
The results indicated, plywood with this method is not satisfying and its properties of environmental protection and flame retardation are hard to improve, the highest OI is only 38% in experiments.
硫浸渍混凝土的性能和未浸渍混凝土相比有明显改善，但是，硫浸渍混凝土在高湿度条件下耐久性较差。
The properties of sulphur impregnated concrete are much better than those of untreated concrete. But Sulphur impregnated concrete is not durable in a high humidity environment.
本文针对具体工程，系统进行不同品种硅烷浸渍剂、不同硅烷浓度对混凝土保护性能的影响规律。
This paper presents the regular pattern of protection effect of concrete coated with different type and different concentration of silicane impregnant.
采用粉末浸渍的方法制备连续玻璃纤维增强聚丙烯预浸料，经切割获得长纤维增强聚丙烯粒子，探索了材料的注塑工艺，研究了注塑后材料的力学性能及其影响因素。
The pre-impregnation compound of continuous glass fiber reinforced PP was prepared by using powder impregnation process and cut into the long fiber reinforced PP particles.
研究了液相浸渍及化学气相法致密工艺对二维炭炭（2DC C）复合材料力学性能的影响，尤其是对层间剪切强度（ILSS）的影响。
Influence of CVD and LIC densification processes on mechanical properties, especially interlaminate shear strength(ILSS) of carbon cloth reinforced 2D C/C composites is studied.
用MB—04浸渍剂对碳—石墨材料进行浸渍处理，可获得既具有耐高温密封性能，又具有抗氧化特性的新材料。
The novel material having high temperature sealing ability and oxidation resistance can be obtained by impregnated carbon-graphite with MB-04 impregnant.
以植物纤维与合成纤维为原料，采用复合抄片及树脂浸渍工艺研制出了透气度性能良好的机油滤纸。
Effects of fiber raw material, furnish and papermaking process on the properties of oil filter paper are discussed in this paper.
对酚醛浸渍处理杉木与杉木素材的干缩性、湿胀性、吸水性能进行了对比研究。
The paper based on a comparison research between resin impregnation treated Chinese fir and untreated Chinese fir, concerning the characters of shrinkage, swelling and water absorption.
用预浸渍部件增强的最终构件(23)的机械性能比没用预浸渍增强的相同rtm部件好，尤其是在压缩性能方面。
The final component (23), reinforced with pre-impregnated parts, has better mechanical properties than the same RTM component without pre-impregnated reinforcements, in particular in compression.
高温煤沥青炭的抗氧化性能要好于浸渍剂沥青炭；
The oxidation resistance of high temperature pitch carbon show well.
采用改善炭石墨基体材料抗氧化性能和浸渍磷酸无机高分子复合盐的内外结合的方法，制备的石墨材料具有较好的抗氧化性能。
The carbon graphite material prepared by the means of improving the oxidation resistance of the basic body materials and impregnated with phosphates had better oxidation resistance.
结果表明，粘合剂的质量分数和硫酸浸渍浓度对催化性能有较大影响。
The results show that the binder mass fraction and the impregnation concentration of sulfuric acid have great effect on the activity of the catalyst.
应用推荐