在测量模型验证阶段，本文用验证性因子分析方法对各变量结构的有效性进行了验证。
While estimating the measurement model, this paper confirms the structural validity of every variable by the confirmatory factor analysis.
在研制出样机的基础上，对数学模型的验证，起重传感器测量系统的标定，以及现场测试等方面进行了全面系统的实验研究。
Experiments concerning the verification of the mathematical model, calibration of the sensing and measuring system, and field applications are carried out on the basis of the prototype.
模型验证是通过计算水波波高衰减率和底床软泥体输移速度，并与有关的实验测量数据进行比较。
Model verifications are given through comparisons between the calculated and the measured bed mud mass transport velocities as well as the rate of decay of water wave heights.
模型验证是通过计算水波波高衰减率和底床软泥体输移速度，并与有关的实验测量数据进行比较。
Model verifications are given through comparisons between the calculated and the measured bed mud mass transport velocities as well as the rate of decay of surface wave heights.
本文利用ECT技术在临床上验证了基于FRANK导联系统心电图的测量心肌梗塞面积及方位的数学模型。
In this paper, ECT has been used in clinic to verify the mathematical model based on FRANK ECG system about the measurement of infarct size and its location.
在实际测量中验证了该模型计算的有效性。
The validity of the mathematical model has been verified by the actually measured results.
在这里要强调的是，这只是一个模型，一个有效的假说，还需要许多其他的测量来严格地验证。
The point to emphasize here is that this is a model, a working hypothesis that must be rigorously tested by many additional measurements.
用有限元法对客车车身的强度、刚度进行了分析，用电测量技术对有限元模型进行了验证。
The article USES infinite element method to analyze the intensity and rigidity of bus body, and USES electrical measurement technique to testify infinite element model.
有限元计算和试验测量结果验证了这一模型对压电振子频率计算的准确性。
The FEM and measured results validated the accuracy of this model in frequency calculation of piezoceramic elements.
用有限元法对半承载式客车车身强度、刚度进行了分析，用电测量技术对有限元模型进行了验证。
The strength and rigidity of bus body are analyzed, with finite element method and the finite element modeling is validated using the electric measure technique.
通过铣削实验和对加工表面的测量，验证了上述模型的正确性。
The models mentioned above are verified by means of milling tests and measurements of milled surfaces.
在战略管理研究中涉及众多隐含变量的测量以及因果模型的验证，结构方程模型为解决这些问题提供了新的更好的方法。
Structural equation modeling has great abilities to treat measure error and offers a strong tool for measuring latent variable and verifying the causality models in strategy management research.
水下天线辐射场的测量结果验证了数学模型的正确性。
The measured result in a water tank verifies the mathematical model.
主要通过机理分析建立了氧量软测量模型，仿真验证表明建立的氧量软测量模型能够较好的反映实际氧量的变化。
Setting up the soft-sensing models of oxygen content through mechanism analysis, and this soft-sensing model fit well with the practical oxygen content, which is illustrated by the simulations.
已有研究验证了单纯感知模型要比期望差异模型更适合于游客总体满意度的测量。
The studies have tested that pure perception model is more adaptive to the measurement of overall satisfaction than Expectancy Discrepancy model.
采用热电偶测量了典型位置的温度场以验证模拟结果，结果表明，建立的模型能较准确地模拟薄板TIG焊的温度场。
Experimental research was conducted to verify the results of simulation. It can be concluded that the model can simulate the temperature field of TIG welding correctly.
据此建立了缸内滚流比预测模型，并在稳流试验和拖动工况下缸内流动的LDA测量试验中得到验证。
A model for predicting the tumble speed is derived and verified by the steady flow rig and the in-cylinder flow measurement results by a LDA system.
利用测量机的误差模型验证测量模型的正确性，并与理想模型进行比较。
Compared with the ideal model, correctness of the measurement model is verified by the error model.
数学模型计算结果得到了实验室测量值的比较和验证。
The numerical simulation results are compared and validated by laboratory tests.
实验室岩心测量结果验证了该模型。
The new model has been confirmed by the results of experiment.
实验证明：该模型的数据处理量和测量误差都较小。
The experiment show: the model has small quantity of calculation and measurement error.
最后通过模拟试验进行验证，得出了该模型能够满足管段沉放测量要求的结论。
Finally, a simulation test to verify that the model can be suitable for measurement required in the process of tube sinking.
对某六缸增压柴油机进行扭振测量，获取相关参数，与仿真值相比较，验证模型准确性。
Measure the torsional vibration characteristic parameter of the engine and estimate the validity of the model by comparing the results of the test with the results of the simulation.
结合宝钢3号连铸机结晶器生产数据，对模型进行了验证，所得计算结果符合实际测量值。
The simulation was validated by the actual operation data of No. 3 continuous caster at Baosteel. The agreement was very well.
作为实验验证，利用内照明积分球光源对临边成像光谱仪原理样机进行了信噪比测量，测量结果证实了理论模型的正确性。
As experimental validation, SNR testing was performed using an internally illuminated integrating sphere, and the experimental results have proved the correctness of this theoretical model.
通过实验，测量样机的实际电流、电压波形，验证开关磁阻电动机非线性模型的合理性。
The control software is programmed. The experiment waves of current and voltage of the motor are given and analyzed.
依据收集的大量实验室和现场测量数据，对该模型进行了学习和验证。
It is trained based on a large number of data atlaboratory and in field.
分析了工作原理，推导出光路部分的数学模型，并通过实验验证了测量方法的可行性。
The principle is analyzed, the mathematical model of the optical configuration developed, and the feasibility tested.
分析了工作原理，推导出光路部分的数学模型，并通过实验验证了测量方法的可行性。
The principle is analyzed, the mathematical model of the optical configuration developed, and the feasibility tested.
应用推荐