测量介质损耗是高压电气测量绝缘的基础试验。
Measuring the medium loss is the insulating foundation experiment of electric measurement of high pressure.
可根据测量介质对耐腐蚀性能的不同要求而选用不同材质的膜片。
Choosing diaphragm material is decided by different performance of corrosion resistant that the measured medium required.
近几年检定实践表明，测量介质的物理参量的变化对其测量精度是有影响的。
It showed that the change of physical parameter of measurement medium influences the accuracy of measurement through the inspection experiment in the recent years.
在测量介质是强腐蚀、高温、高粘度、易结晶，易凝固、有固体浮游物的情况下使用。
The test medium is strong corrupt, high temperature, high adhibit, easy crystal, easy freeze or have unsolved solid.
本文提出的三点式误差分离新方法用以分离旋转轴线的径向误差运动与测量介质或测量对象的形状误差。
A new 3-point error separation method is developed and used in this paper for separating the radial errors of rotating axis and the shape errors of the objects measured.
方法：本文首先介绍脉冲中子源法测量介质的扩散长度的原理及推导过程，然后讲解发生器的设计与原理。
Method: in this article, introduce the experiment that "Measure medium's diffuse length using pulse neutron method" first, than explain the pulse generator's design and principle.
隔膜压力表的耐蚀性能包含环境及测量介质的腐蚀特性，可按使用条件选配隔离器，隔膜，密封垫圈的材料。
Divide the corrosion resistance of pressure gauges includes the environment and the corrosion of media measurement, matching conditions can be isolated, divide, sealing gasket material.
提出了一个新型的产品轮廓反求的逆向工程系统，其中轮廓数字化扫描方法以液体作为测量介质，液体的液面与产品之间形成的交线即为要测量的产品的截面线。
A new reverse engineering system of product profiles was presented, it included the digitized scanning system for product profiles based on liquid, CAD system, mold design and manufacturing system.
电气强度测试仪(也称为耐压测试仪，电介质强度测试仪，闪点测试器，高压测试仪)是用来测量此类电流值的测试仪。
A dielectric Withstand tester (also called hipot tester, dielectric strength tester, flash tester, high voltage tester) is then used to measure this current.
因此击穿电压的检测必须重视电介质击穿现象的电参数值的测量。
The exact determination of the breakdown voltage must therefore be attached to the measurement of an electrical value characteristic of the dielectric breakdown phenomenon.
我们干渴的光数字水分测定仪采用专利工艺实际读数解释它获取，并为您提供一对盆栽介质干燥更为精确的测量。
Our Thirsty Light digital moisture meter USES a patented process to actually interpret the readings it gets, and gives you a far more precise measurement of the dryness of the potting medium.
通过红外线光学测量法，研究人员可以证明由肥大细胞和肠嗜铬细胞分泌的介质能直接激活肠道的神经细胞。
Using ultrafast optical measuring methods, the researchers were able to demonstrate that mediators from mast cells and enterochromaffin cells directly activate the nerve cells in the bowel.
电介质强度试验是在每对导体（包括地）之间和每个导体与包装了金属薄片的尾档之间测量。
The Dielectric Strength Test is to be performed between each pair of conductors (including ground if applicable) and between each conductor and the foil wrapped cord guard.
并给出了各种液体介质和玻璃的测量结果。
研制吸波材料，必须进行介质参量的测量。
To research into and prepare absorbing materials, medium parameters must be measured.
因此对电气设备绝缘介质损耗的测量已逐渐成为国内外电气研究中的一个较热门的领域。
So it has become a hot domain in the electrical research to measure the dielectric loss .
采用独特的恒温原理建立数学模型，测量出介质的质量流量，无须温度和压力补偿。
Thermal mass flow sensor has unique constant temperature principium as mathematical model for measuring medium mass flow without compensation of temperature and pressure.
通过自制的专用电容器，采用电容测量仪测电容的方法，在物理实验中开设液体电介质的相对介电常数的测量实验。
This article introduces a method to measure the relative dielectric constant of liquid dielectrics in physical experiments, with a special capacitor made by ourself.
当搅拌该浓缩的悬浮液时，将等分试样转移至含有空白分散介质的光学测量比色皿中。
While stirring this concentrated suspension, a small aliquot is removed and transferred to the optical measurement cell containing the blank dispersing medium.
空间电荷的测量对于电介质材料的研究有重要的意义。
Space charge measurement is very important to study of dielectric material.
失真测量设备，方法，程序，和记录介质。
Distortion measuring device, method, program, and recording medium.
靶式流量计测量高粘度介质流量有其独特的优点。
Target flowmeters offer unique features to flow measurement of media with high viscosity.
测量结果说明介质和温度对旋风分离器分离细颗粒催化剂有一定的影响。
The measurement results denoted that: the medium and temperature produced a certain influence on fine grain catalyst separated from cyclone.
介质损耗测量是电力系统中的常规试验项目。
Dielectric loss measuring is the normal test items in electric power system.
介质损耗测量是电力系统中检测高压电气设备的常规项目。
Dielectric loss measuring is the normal item to test the high voltage equipment in electric power system.
研究了测量波长、色介质、度、色剂加入量、度、间及干扰元素等对测量结果的影响。
The effects of measuring wave length, addition of chromogenic agent, chromogenic media, acidity, temperature, time and interfering elements on the measured results were studied.
该仪器用于塑料等介质薄膜的厚度测量。
This instrument is used in thickness measuring of plastic film.
本文主要介绍在间接式多相流变介质参数测量中，8098多机系统串行通讯的实现方法。
This paper mainly introduces how to implement serial communication of a 8098 multicomputers system in parameter measurement of mixed phase flow.
它是利用多相介质具有不同的介电常数，通过电容传感器测量获得介电常数分布而获得介质分布的图像。
By using multiphase medium with different permittivity, the image of medium distribution could be obtained through measuring the obtained permittivity by capacitance sensor.
它是利用多相介质具有不同的介电常数，通过电容传感器测量获得介电常数分布而获得介质分布的图像。
By using multiphase medium with different permittivity, the image of medium distribution could be obtained through measuring the obtained permittivity by capacitance sensor.
应用推荐