本文提出了一种利用全景电视系统测量井管错位的新方法。
In this paper, new method of measuring misplace of well casing using panoramic TV system is proposed.
机械式测斜仪是石油钻井工程中使用的一种用于测量井斜的仪器。
The Mechanical Inclinometer is an apparatus which is used for oil drilling engineering to measure the deviation of the oil Wells.
通过直接测量井中每一地层的声速度，测井记录和井中地震数据可以更容易地和地表地震数据联系起来。
By directly measuring the acoustic velocity of each formation encountered in a well, the well logs and borehole seismic data can be correlated to surface seismic data more easily.
井深测量通常是指方钻杆补心高度，如补心高度8327英尺，就意味着在方钻杆补心以下有8327英尺的深度。
Depth measurements are commonly referenced to the KB, such as 8327 ft KB, meaning 8327 feet below the kelly bushing.
在此基础上，介绍了LWD的几种地质参数测量传感器和录井传感器的典型结构和功能。
It also introduces typical structure and function of several geological parameter measurement sensors and logging sensors in LWD at the former base.
对于大多数直井，倾角其实也只是对井眼轨迹的测量。
For most vertical wellbores, inclination is the only measurement of the path of the wellbore.
其发现井是1927年根据磁力和扭称测量结果而钻探的。
The discovery well was drilled in 1927 on the basis of magnetic and torsion - balance surveys.
而对于泥浆录井人员的测量，报告的是天然气的“单位”(实际没有绝对意义)。
In the case of the mud logger's measurement, "units" of gas (having virtually no absolute meaning) are reported.
其发现井是1927年根据磁力和扭称测量结果而钻探的。
The discovery well was drilled in 1927 on the basis of magnetic and torsion-balance surveys.
除了由试井测量之外，孔隙压力由地层测试器测量。
In addition to being measured by well tests, pore pressure is measured by formation testers.
对于故意使井眼倾斜的井，或井眼接近于法定的边界，方位信息通常也要进行测量。
For intentionally deviated wellbores, or Wells close to legal boundaries, directional information is usually also measured.
介绍了许疃煤矿西风井与主井之间的贯通测量的方法、误差分析和预计。
This text explains to Xutuan coal mine west breeze well and main well a method, error margin for of run-through measuring analysis with anticipate.
入井前，带班队长或司钻要用合适的测量规核实扶正器、扩眼器、钻头，确保尺寸合适。
The Toolpusher or Senior Driller shall verify all stabilisers, reamers and bits will be gauged with appropriate ring gauge to ensure proper size before running in the hole.
在一次测量过程中，两组测量单元可以测出各自所在位置的井斜角和相对扭转角，由此可计算出两个单元之间的方位角变化。
The azimuth Angle change between the two units can be calculated by once operation according to the deviation angles and relative torsion angles measured with the units at each point.
在综合录井仪中，大钩高度的测量是最基本、最重要的，但其测量软件设计比较复杂。
The hook height measurement is the most basic and important part of Comprehensive Mud Logging Unit and its software design is complex.
在斜井和水平井中，所有这些测井测量纵向的和水平电阻率的混合值。
In deviated and horizontal Wells, all these logs measure some mixture of both vertical and horizontal resistivity.
简要介绍了陀螺经纬仪在定向测量中的应用和祁东风井联系测量技术。
This text introduces the application of theodolite in the directional measure technique in Qidong ventilation shaft.
介绍了井—地电位测量技术方法原理，重点分析了井—地电位测量数据成像处理方法和在新疆油田五1区的应用。
This paper addresses the theory of well-ground potential measurement, with emphasis on data image processing and its application in Wu1 Block of Xinjiang Oilfield.
文中论述了用mdt模块式地层动态测试器在水平井中的测量及解释方法。
The paper introduces the measurement and interpretation method of formation pressure in horizontal well by using MDT formation dynamic tester.
使用相同的参数在相同的井段记录两次的目的是评价测量的可重复性。
The purpose is to judge the repeatability of the measurement by recording it twice over the same interval with the same recording parameters.
在大多数情况下，随后的测量(如在完井阶段所进行的测量)都被校正至基于司钻深度的井口基准面。
In most cases, subsequent depth measurements, such as those made during the well completion phase, are corrected to the wellhead datum that is based on drillers depth.
多层合采井产能评价的关键是测量分层动态参数，而对于生产测井来说这已是较为成熟的技术。
The key of layering productivity evaluation a multiplayer producing well is to measure its performance parameters, which is a mature technique of production logging.
同时介绍了阵列中子测井样机在模型井中的各种测量结果。
Various measuring results of model machine of array neutron logging in the model are introduced simultaneously.
更进一步，使用常规的钢缆工具，许多井，尤其是大斜度井，很难甚至是不可能进行测量。
Further, many wellbores prove to be difficult or even impossible to measure with conventional wireline tools, especially highly deviated Wells.
井中重力测量具有受干扰因素少，精度高的优点，它在油气勘探中具有广阔的应用前景。
Because of less disturbance and higher accuracy borehole gravity measurement will find its wide application in hydrocarbon exploration.
测井打印图上的第一页或前边几页称图头。图头中包括井的信息、测量信息、泥浆性质和其它一些相关数据。
The first page or pages on a log print, which include information about the well, the survey, the mud properties and other relevant data.
井温和井下压力的测量分别采用铂电阻传感器和应变传感器测量。
Well temperature is measured with platinum resistance sensor while the downhole pressure with the strain sensor.
伽马密度测井测量水泥环体密度，这种测量方法与固井各胶结面状态无关。
Gamma density logging method is used to measure the volume density of the cement sheath.
通过对井筒不同深度的测量，即可得出井身轨迹曲线。
Well body track curve can be drawn out through surveying the depth in the hole.
通过对井筒不同深度的测量，即可得出井身轨迹曲线。
Well body track curve can be drawn out through surveying the depth in the hole.
应用推荐