通过对活性碳纤维拉伸性能试验方法及试验技术参数的研究与探讨，旨在找到一种适合测试活性碳纤维拉伸性能的试验方法。
By researching and exploring tensile performance test methods and technical parameters of activated carbon fibers, it is to find a kind of test method meets activated carbon fibers.
本文通过对不同土基回弹模量测试方法的研究，初步评价了其优缺点、适用范围及改进措施。
This paper researches the different testing methods of soil resilient modulus, and primarily evaluates their merits and shortcomings, applicable area and mend measure.
本文的研究能帮助程序开发人员在回归测试中确定需要重测的类和方法和成本估算及制定进度计划。
This research result in efficient regression testing by helping testers decide what classes and methods need to be retested, and in supporting cost estimation and schedule planning.
将自然拼读法首次应用于艺术类院校大学英语教学中，通过实验及测试，运用定量分析的方法，对自然拼读法在大学英语词汇教学中的应用问题进行研究。
Applying Phonics teaching Method into the English teaching of Art College students for the first time, the author makes a study through experiments and tests by the way of quantitative analysis.
本课题是国家自然科学基金项目“用于交通监测系统的智能混凝土的电特性及测试方法研究”的一部分。
This work is a part of the project Study of the Electrical Property And Testing Methods of Smart Concrete For Traffic Monitoring System, supported by the National Natural Science Foundation.
研究了黏结剂腐植酸钠的制备方法及褐煤半焦成型工艺，并对不同配比的型焦作了各种强度指标测试。
We studied the fabricating method of humic acid sodium and forming process of lignite semi-coke and tested strength indexes of moulded coke of different proportioning.
文中所提到的协议描述及实现方法，可广泛应用于通信协议的研究及测试。
The method of description and implementation of the protocol in this thesis can be widely applied in the research and test of other communication protocols.
文中所提到的协议描述及实现方法，可广泛应用于通信协议的研究及测试。
The method of description and implementation of the protocol discussed in this paper can be widely used in the research and test of communication protocols.
研究了水、氯离子及气体在混凝土中的渗透与扩散的机理，分析了影响混凝土渗透性的主要因素及有待进一步研究的方向，并总结了混凝土渗透性指标的测试方法。
Research mechanism of diffusion and infiltration of concrete, analyze the main influence factor of the concrete permeability and summarized the method of testing of the penetrating index of concrete.
采用微观测试分析方法对激光快速成形过程熔覆层裂纹的形成机理及影响因素进行研究。
The forming mechanism and influencing factors of crack in laser rapid forming cladding layers are investigated through micro measurement and analysis methods.
基于多相流基础理论，采用原型观测与室内实验相结合的方法，研究了油气井生产及测试管道中多相流的流动过程。
On the basis of the multiphase flow theory, the flow behavior of multiphase fluid in ground pipelines of well was investigated with the integrated method of prototype observation and in-situ test.
本文旨在通过对IGBT的SPWM信号源及IGBT测试系统的研究，为生产IGBT的厂家提供可借鉴的测试方法。
The paper aimed at the adoption of the IGBT SPWM (Sinusoidal Pulse Width Modulation) signal source and IGBT test system research for the production of IGBT manufacturer to provide testing methods.
为了配合电解加工成形规律的研究和新技术的开发，对电解加工测试手段及研究方法进行了调研。
To cooperation with the study profile rule and evaluate a new technique, we investigate and discussed the testing means for electrolytic machining.
一些船舶在研究设计的初步阶段，进行方案比较作定性的试验研究时，该方法及测试手段具有简便、经济的优点。
This is an economic method with simplicity, when applied to the qualitative analysis of ships that have to undergo comparison of schemes during the initial design.
在土体材料方面，研究方法有面波测试、振动台试验及数值模拟。
In the aspect of soil materials, research methods are surface wave test, shaking table test and numerical simulation.
通过电化学测试方法研究了脉冲真空渗氮防腐层及裸样的抗腐蚀性能。
The corrosive behavior of Pulse Vacuum Nitriding coating and plain sample were investigated by an apparatus of electrochemical measurement.
本文在研究切削测力仪的标定方法及分析测试系统的基础上，设计出一套标定装置。
Based on analysis of calibration method of dynamometer and processing sys - tem. a set of calibration device is designed.
研究了CCD图像传感器及CCD摄像机的性能及测试方法。 重点探讨了高分辨率的CCD摄像机的成像特点。
The performances and test methods of CCD image sensor and pickup system, and the imaging characteristic of high resolution CCD camera are studied.
最后根据实际测试经验，研究了软件工程中的软件自动化测试的管理方法、遇见的问题及应遵循的原则。
At last Based on the actual test experience, research software automation test's management method in software project, what questions will be encountered and what rules should be obeyed.
本论文针对高速互连电路串扰型故障及测试生成方法进行研究。
This paper studies the crosstalk fault and its methods of test pattern generation in high-speed interconnect circuits.
论述了土壤学科基础理论研究和测试方法的重大进展，森林土壤学科国内外研究现状及未来发展趋势。
Great progress in theoretical research and measurement methods in soil science was described and the present situation and future development trends were analyzed.
本文在总结前人研究成果的基础上，通过模型建立、理论分析和模型试验等方法对土的固结系数及渗透系数的原位测试理论和吹填淤泥真空固结特性进行了研究。
Based on the study of predecessor, the in-situ test theories and consolidation characteristics of dredger soil under vacuum pressure were studied by theoretical analysis and model tests.
在分析织物光泽与光泽感的基础上，研究了织物光泽的测试仪器及光泽的评定方法。
On the basis of analyzing fabric lustre and lustre sensation in detail, and instrument measuring fabric lustre, and the method of lustre evaluation are studied.
文章介绍了一种研究延期药燃烧过程及规律的新方法——分段压制测试法。
A new method to research combustion characters of delay compositions is introduced in this paper, that is subsection pressing charge measure method.
文章运用单层测试、测井信息研究了干层、气层及水层的规律，总结出一套现场解释方法。
The stratum laws of gas bearing, water bearing and dry one are studied by single-interval test and logging information, A set of interpretation methods for working site are summarized.
通过对超声多普勒原理、路面变形的分类研究及测试信号谱分析的详细讨论和研究，给出了一种连续、快速检测沥青路面变形情况的方法。
Following discussions on the principle of Doppler, the classification of the deformation, and analysis of signal spectrum, a continuous and rapid method for the measurement is presented.
由于发动机内工作过程非常复杂、影响因素众多，对发动机内传热及热负荷的研究目前主要还是采用实验测试的方法。
Because the inside work processing of engine is very complex, and the influence factor are numerous, the heat transfer and thermal load inside engine are primarily investigated by means of experiment.
介绍了核电站蒸汽发生器管子-管板焊缝的氦质谱检漏及总漏率测试方法的研究及为提高检测灵敏度所采取的措施。
Using the helium mass-spectrometer leak detector to detect the leak of seams between the tube and face-flange and measure the total leakage rate are introduced in this paper.
研究了汽车工况法排放测试的模态试验方法及分析方法。
Modal measurement and analysis method of vehicle emission test were discussed.
研究了汽车工况法排放测试的模态试验方法及分析方法。
Modal measurement and analysis method of vehicle emission test were discussed.
应用推荐