介绍了一种气浮转台无线测控系统设计方案。
A wireless measurement and control system on air-bearing turntable is introduced.
利用霍尔元件设计了霍尔传感器，用于球关节位姿测控系统设计。
A special sensor designed with Hall Elements is used in the position-orientation measurement and control system.
介绍了嵌入式技术在风洞测控系统中的典型应用，和基于嵌入式技术的风洞测控系统设计。
The typical applications of embedded technology in wind tunnel are introduced, and the design of a wind tunnel measurement and control system based on embedded technology is presented.
根据锂电池的特点，采用CAN总线技术，提出了一种基于CAN总线的锂电池自动测控系统设计方案。
According to the features of Lithium battery, this paper presents the design of an automatic test and control system for Lithium battery based on CAN bus by adopting the technology of CAN bus.
给出了热泵式恒温恒压供热水系统的工作原理框图，对温度控制系统和压力测控系统设计作了详细叙述，并给出了设计原理框图。
The diagram of working principle of the hot water system based on heating pump and constant temperature and pressure is introduced.
本文详细论述了基于交流测功机的发动机测控系统的硬件建立与软件设计。
This article in detail discussed the hardware establishment and the software design of the engine controlled and tested system based on the AC dynamometer.
本文设计了一以单片机(at89c51)为核心的具有无线通信功能的智能型人工气候室测控系统。
An intelligent wireless control system of glasshouse which USES AT89C51 as the kernel is introduced in this paper.
论文的主要结果有(1)对双速率采样系统，分别给出了基于状态空间模型和输入输出模型下的预测控制器的设计方法。
The main results are: (1) For a dual-rate sampled system, the design methods of predictive controller based on state-space model and input-output model are given respectively.
测控装置系统标定的准确性将直接影响到测试结果的真实程度或控制系统的设计效果。
The demarcating accuracy of measure-control device system can directly affect the reality of test result or the design function of control system.
以差分吸收激光雷达为背景，对基于WDM的实时监测控制系统的设计中涉及的关键技术进行研究。
With differential absorption laser radar as background, the key techniques related in designing real-time monitor and control system based on WDM (Wavelength Division Multiplexing) are studied.
试验结果表明．试验方法先进可靠．测控系统硬件结构合理．抗干扰能力强；软件设计新颖．功能完备。
The test results show that the hardware of the system has reasonable structure, great capability to resist disturbance, in addition, its software has the new design and full function.
详细讨论DS1820温度传感器和单片机接口电路，软件设计以及在测控系统中的应用。
The application of the DS1820 digital temperature sensor in the measuring and controlling system and software design is discussed detailedly in the paper.
其中重点阐述了测控系统的设计思想、硬件工作原理及软件框图。
Especially, more attention is paid to design philosophy, operation principle, hardware block diagrams and software flow charts.
通过实验方法建立了系统的ARX模型，并在此基础上设计了预测控制器对结构进行振动主动控制。
An experiment method was used to identify ARX model of the system, based on which the predictive controller was obtained to control vibration of a cantilever beam.
该研究对无人机测控系统的设计有重要的参考价值。
The design is important to telecontrol and telemetry system of UAV.
分析了电液转换元件的硬件测控系统，设计了硬件测控模块。
After analyzed hardware control test system, hardware measure-control modules were designed.
介绍了热动力环境模拟试验设备的设计，并分析了测控系统硬件、软件结构。
The design of the thermodynamic environment simulation test equipment is introduced and the software and hardware structures of measurement and control system are analyzed.
设计了发动机实验台pid测控系统的电路，确定了各元件的参数。
PID measuring and controlling system circuits of engine test-bed was designed and the parameters of each element were determined.
提出了一种多回路测控系统的设计方案。
In this paper, a design concept of multi-loop measurement and control system is proposed.
本文设计了基于神经网络技术的预测控制系统，包括控制对象模型的设计、预测模型的设计和控制器的设计。
The design of the predictive control system based on Neural Network include designing control object model, designing predictive model and designing controller model.
以软件工程的结构化设计方法为主线，以通信电源网络测控系统为具体的实例，成功的完成了整个系统的软件开发工作。
Construct design methodology of software engineering is main center, and communication power network monitor and control system is concrete instance.
针对汽车安全检测，本文论述了其计算机智能测控系统的组成和设计要点。
Aiming at the automobile safety-detection, the paper discusses the structure and design of the computer intelligent detection and control system.
论述了基于工业PC机(IPC)的一种高精度土壤蒸渗仪测控系统的设计。
This paper mainly deals with the design of a new weighing type of measuring and controlling system by Lysimeter with high precision based on industrial personal computer (IPC).
本文介绍了一种基于CAN总线的测控系统智能传感器的硬件设计方案。
This article introduces a kind of intelligent sensor node in measuring and controlling system based on CAN bus.
介绍了灰色预测控制系统软、硬件的设计；
Then, the design of hardware and software systems of GPC is introduced.
论述了大型变压器油色谱在线监测控制系统的工作原理及硬件、软件的总体设计思想。
This paper introduces the principle and design ideas of hardware and software of the on - line chromatograph monitoring system for transformer oil.
本文介绍智能热值测量系统中测控软件的容错设计，从而提高了系统的容错性。
This paper introduces the to tolerance design for the measuring and control software of the intelligent calorific value measuring system.
阐述了大气数据自动测控系统的硬件和软件设计方法，介绍了该系统的硬件和软件结构及关键技术，分析了系统的特点和功能的实现。
The design method of hardware and software of automatic test system for air data was introduced in this paper and the structure of hardware and software and key technique was also given.
介绍了糖厂酸碱中和的酸度控制系统以及采用动态矩阵控制算法设计的预测控制器。
The pH control system of centralization process in sugar refinery and the predictive controller designed by using dynamic array control algorithm are presented.
如果判断出系统存在混沌现象，则设计模糊神经网络预测控制器，实现了对电力系统混沌振荡的预测控制。
If there is chaos oscillation in the power systems, a fuzzy-neural forecast controller is designed and forecast control is realized to the chaos oscillation.
应用推荐