本文介绍了一种光纤测力传感器。
A force sensor of optical fibers is introduced in this paper.
测力传感器设计的应力集中原则。
双环测力传感器弹性体是一种新结构。
Double ring type load cell's elastomer is a new type of structure.
本文对s型测力传感器的动态特性进行了研究。
The dynamic characteristics of s shape force transducers is tested.
本文介绍压磁式测力传感器的制作原理和方法。
This article deals with the principle and method of the making of the pressductor on a force measuring device.
此外，它不易受质量变化或环境温度变化，如测力传感器。
In addition, it is not susceptible to mass changes or ambient temperature changes as are load cells.
另可增加发热模具及温度控制器，也可增加测力传感器等。
Allows adding heating modules and temperature controller, as well as forcing transducer additionally.
本文采用应变式测力传感器测量出钢药筒抽壳力随时间变化的规律。
This paper investigates the law of cartridge extraction fore with time by use of strain-type force's transducer.
正交型应变式三维测力传感器是用来测定三维空间力的一种新型结构。
The transducer of orthographical and strained model is a new-type instrument applied to measuring three-dimensional space forces.
在精密离心机机座下放置三个地脚，用一个测力传感器代替其中一个地脚。
The three pads under the pedestal of the precision centrifuge is used for measuring the dynamic unbalance, one of them is mounted on a force-measuring sensor.
文中介绍了在测力传感器的设计过程中经常运用的两种应力集中的设计原则。
This paper introduces two principles of concentrating stress, which are usually used in the design of load cells.
应用结果表明，光纤光栅测力传感器可有效监测钢管混凝土系杆的受力状况。
The applied results indicate that fiber grating strain sensors are effectively able to monitor the tension status about reinforced concrete bowstring arch bridge.
摘要：文中介绍了在测力传感器的设计过程中经常运用的两种应力集中的设计原则。
Abstract: This paper introduces two principles of concentrating stress, which are usually used in the design of load cells.
此袖珍式电子秤采用测力传感器将重力信号转换成电信号来测量，并将测量结果进行数字显示。
This pocket type electronic balance adopts the dynamometry transducer to change the gravity signal into an electric signal measurement, and will measure the result and carry on the digital display.
分析表明，这种双量程测力传感器既可以连续测量发动机两级推力，又提高了其测量灵敏度和精度。
The results show that the sensor designed can continuously measure the two grade thrust of rocket engine, and improve the measuring precision and sensitivity.
介绍了立姿射击的抵肩力统计测量的意义及采用双剪切梁式应变测力传感器测量抵肩力的系统组成；
The significance of shoulder force statistical measurement is explained, and a sys- tem with double- shear beam stain gage force transducer for measuring the shoulder- force is introduced.
实测结果表明，压磁式非接触测力传感器所能达到的测试精度和灵敏度能够满足一般工程应用要求。
Results show that the sensor's measuring precision and sensitivity can meet the application demands for general projects.
最后又结合轧机工况监测系统，使用附着式测力传感器对轧制力进行在线监测，证明具有较好的使用效果。
With the monitoring system, the attached type ergometric sensor can be used for the online rolling force monitoring, which proves nice effect.
介绍了附着式测力传感器的结构、原理及实际应用，并从实用性、经济性及可操作性的角度对其进行了阐述。
This article has described the structure, principle of the attached type ergometric sensor and its actual application as well as its practicability, economy and operability.
分析了带测力传感器的半环四针传感型骨外固定器的固定和测力原理，结果表明其不仅固定稳定，且测力准确。
In this paper, there is an analysis of the principle about fixing bones and measuring power of half loop & four acus external skeletal fixer.
按照这两种应力集中的原则，对弹性体进行结构设计，能够收到提高测力传感器的测力精度和测力灵敏度的良好效果。
According to the principles the elastic bodies of load cells are designed and the fine accuracy and sensitivity of measurement can be obtained.
这些传感器的凹凸不平，压缩工业用称重传感器的设计和符合成本低称重和测力系统的需求。
These load cells designed for rugged industrial use as compression load cell and meet the needs of low cost weighing and force measurement systems.
通过设计传感器位置调整装置，可以将测力片位置调整到设计位置。
The position adjustment is designed to keep the sensor's position correct.
主要产品有：BK系列高精度测力、称重传感器；
The main products include: BK series high accuracy load cell.
汽车等运输工具装载量的称重主要采用两种称重装置：一种是用机械方法构成的地磅称重，另一种是采用传感器作测力装置的电子衡。
Commonly we have two kinds of weighing instrument for truck carrier: loadometer, which is made in mechanical way, and electronic weighing machine, which USES sensor as force measuring instrument.
压电磨削测力平台结构优化设计的核心是弹性环与传感器三向刚度相互匹配的问题。
The mutual matching of rigidity from three directions between elastic ring and sensor is the core of problem of structural optimization design of piezoelectric milling force-measuring platform.
振弦式传感器被测力与输出频率之间是一种非线性关系，它严重影响了传感器的测量性能。
The nonlinear relation between the measured force and the frequency of vibrating wire sensor always severely affects the measured performance.
文中研究了索张力传感器的测试机理，导出了传感器测力信号与索张力的关系。
Testing mechanism of the sensor is researched and the relation between test signal and tension is deduced.
采用水压力补偿技术，设计了基于圆筒式测力结构的水下灵巧手指端力传感器，分析了其工作原理。
This paper described the development of fingertip force sensor based on cylindrical elastic body employing the water pressure compensation technique, and analysed the principle.
采用水压力补偿技术，设计了基于圆筒式测力结构的水下灵巧手指端力传感器，分析了其工作原理。
This paper described the development of fingertip force sensor based on cylindrical elastic body employing the water pressure compensation technique, and analysed the principle.
应用推荐