这个平滑的曲线结构采用了钢筋混凝土浇注玻璃钢面板的技术。
The technique using reinforced concrete casting with GRP panels (Glass reinforced plastic) was employed to create the smooth curvilinear structure.
目前公司在对铝翻砂工艺与钢模浇注技术进行改良后，独家采用铝压铸制造和环保型喷塑工艺。
After improving the aluminum foundry and steel casting technology, our company uses the aluminum die-casting manufacturing technology and enviroment-friendly spray exclusively.
铸坯内产生针孔气泡缺陷的原因是钢液脱氧不良，产生大体积气泡缺陷的原因是铸机浇注过程中氩气流量过高。
The defects on pinhole bubble formed in slabs result from badness deoxidization, and the defects on large volume bubbles formed in slabs result from the high flux of argon during casting.
较大；钢液浇注温度仅对液芯长度有较大影响。
But the steel temperature only effects on liquid core length.
通过采用控制出钢终点碳和预脱氧，加强精炼脱氧和出钢软吹，做好保护浇注等措施，降低了钢中氧含量。
The measures of controlling aim carbon content and pre-deoxidation, consolidating refining deoxidation and light blow after steel tapping, protective casting, etc.
与水溶性冷却液浇注冷却的湿式高速车铣相比，干式高速车铣d 60钢时，金属陶瓷刀具具有更高的耐磨性。
Compared with high speed wet turning and milling with aqui-coolant showering, the ceramic. Tool is of even higher wear - resistance in high speed dry turning and milling of steel D60.
加稀土的钢在浇注时经常发生水口结瘤，严重影响稀土在钢中的应用。
When teeming rare earth treated steels the nozzle blockage occurred so frequently that seriously interferes the application of REM in steels.
文中主要研究稀土镁硅合金替代铝条应用于沸腾钢浇注的化学封顶工艺。
This paper mainly introduces the research on the substitution of Aluminium bar by rare earth, magnesium and silica alloy on the process of chemical capping to rimmed steel during casting.
这座无柱的波浪形建筑，是将混凝土浇注进在中国订制的钢铸模而成。
The 28 undulating, column-free shape is created by pouring concrete into steel molds 29 custom-made in China.
结果表明，使用湍流器能显著降低钢液的湍流强度，减少对浇注区液面的冲刷。
Results showed that the turbulence intensity in tundish obviously decreased by using turbulence inhibitor, and it was available to reduce the erosion on surface of tundish.
讨论了操作工艺条件（如拉速、浇注温度、钢液流动、结晶器长度等）对结晶器内钢液凝固过程的影响。
The influence of operating parameter variations including casting speed and temperature, liquid convection in pool, mould length, etc. upon the solidification process o…
粉浆浇注法可以解决钢模压制较大尺寸试样因受力不匀而发生裂纹甚至断裂的问题。
Slurry casting method is a general technology for making material, which can make large-scale cermet.
讨论了操作工艺条件（如拉速、浇注温度、钢液流动、结晶器长度等）对结晶器内钢液凝固过程的影响。
The influence of operating parameter variations including casting speed and temperature, liquid convection in pool, mould length, etc. upon the sol…
经现场试验表明，用空淬贝氏体钢浇注的颚板，其寿命是普通低合金钢颚板的两倍。
As shown by the experiments, the jaw grinders cast with air-quenched-bainite steel offer a life span twice as long as those made of ordinary low alloy steel.
讨论了操作工艺条件（如拉速、浇注温度、钢液流动、结晶器长度等）对结晶器内钢液凝固过程的影响。
The influence of operating parameter variations including casting speed and temperature, liquid convection in pool, mould length, etc. upon the …
为此采用莫来石自流浇注料快速修复钢砖，取得了很好的效果。
In order to repair the damaged throat armor rapidly, self-flow mullite castable was applied and good repairing results were obtained.
针对莱钢异型坯连铸机实现全保护浇注的要求，开发了一种超扁平形状的浸入式水口。
A super-flat submerged nozzle (SEN) was developed for beam blank caster of Laigang to achieve full protection for casting.
主要研究稀土镁硅合金替代铝条应用于沸腾钢浇注的化学封顶工艺；分析了浇注工艺的可行性。
In the paper the use of Rare EarthMgSi alloy for rimming steel coping is studied instead of aluminium.
针对攀钢大方坯连铸结晶器，采用四孔水口浇注重轨钢。
A new submerged entry nozzle (SEN) with four outlets was used for casting heavy rail steel.
针对攀钢大方坯连铸结晶器，采用四孔水口浇注重轨钢。
A new submerged entry nozzle (SEN) with four outlets was used for casting heavy rail steel.
应用推荐