这个铸件的浇注系统一点也不复杂。
The gating system of this casting is far from being complicated.
设计了反压式浇注系统；
浇注系统的平衡最终通过调整浇口的尺寸来达到。
Balance in the feed system is ultimately attained by adjustment of gate size.
以一些铸件为例，介绍消失模铸造实际使用的浇注系统。
Taking some typical castings as examples, some pouring systems used in practical production were introduced.
结果表明该算法具有很好的效果，为浇注系统的优化设计提供了依据。
The results show that the algorithm has a very good effect and provides a basis for optimizing design of gating system.
通过计算设计了注塑模具的成型结构、 脱模机构、浇注系统等方面。
The design includes the mould structure, the mould cavity, the pour system, and so on.
设计了螺纹脱模机构、浇注系统、螺纹转动保险机构和温度控制系统。
Thread demoulding mechanism, injection system, protect mechanism of thread rotation and temperature control system were designed.
采用偏心侧浇道浇注系统，在金属液的末端均匀开设集渣包及排气槽。
Slag strap and exhaust slot are designed in the end part of molten metal, and off-centering runner can be used.
铸件浇注系统和工艺参数的设计是否合理在很大程度上决定了铸件的质量。
Whether the design of gating system and process parameters is reasonable or not, they decide the quality of a casting in a great extent.
系统主要功能包括：通用铸造工艺参数设计、实用冒口设计、浇注系统设计等。
This system consists of the common casting process parameter design module, the practical riser design module, the gating system design module, and soon.
注塑工艺中多型腔非平衡浇注系统的平衡状况，在很大程度上影响制品的质量。
The balance of the multicavity unbalancing injection system has great influence on the quality of the parts.
表明采用收缩模数法计算浇注系统尺寸，用浇注系统补缩的无冒口工艺是可靠的。
The results show that the gating and feeding system without riser is reliable through calculating the sizes of gating system by moduli calculation method.
同时为了满足工艺设计的要求，对铸件本身和浇注系统、冒口的质量进行了精确统计。
At the same time, the weight of castings, riser and gating system is calculated accurately to meet the demand of the process design.
同时，从压铸机选择、工艺参数设置、浇注系统设计角度探讨了压铸模设计关键技术。
The key technologies for die casting die were approached from some aspects of selecting die casting machine, setting processing parameters, designing gating system.
分析了铝合金端盖压铸件结构工艺性特点，介绍了压铸模的浇注系统及模具结构设计。
The structural characteristics of aluminum alloy cover was analyzed, and the design of pouring system and die-casting die structure were introduced.
对模具从浇注系统、流道板及模具的温度控制和强度、刚度等方面进行了深入的研究。
A thorough study has been made on the pouring system, runner board, temperature control, strength and rigid, etc.
它是指将计算机模拟与X射线实时观察相结合，进行铸件浇注系统优化设计的新技术。
Combining the computer simulation with X-ray real time observation, view-cast is a novel technique used for optimizing design of filling system.
结合模流分析结果进行了浇注系统和冷却设计，保证产品有合理的外观品质及平整度。
The Moldflow analysis was introduced to designs of runners and cooling systems so as to ensure the appearance quality and surface level.
分析了铝合金水龙头零件的结构工艺性特点，介绍了压铸模的浇注系统及模具结构设计。
The structural characteristics of the aluminum alloy tap part were analyzed, and the design of pouring system and die-casting die structure were introduced.
应用三维流动模拟软件HSCAE3D6 0对冰箱定位板注塑模的浇注系统进行优化。
A 3d flowing simulation software HSCAE3D6.0 was applied to optimizing the pouring system of positioned panel injection-mould.
注塑模具的典型结构由成型零部件、浇注系统、导向部分、推出机构、温度调节系统等。
The typical structure of plastic injection shaping consists of shaping components, injection system, guiding system, extrusion device, and temperature regulator.
通过对工具箱的塑件工艺分析，确定了直浇口浇注系统、推杆、顶板联合顶出的模具结构。
Through analyzing moulding technology of the toolbox, designed a injection mold with straight gate injection system, ejector rod and stripper plate united ejection mechanism.
叙述化学成分、孕育工艺、铁液温度及浇注系统等因素对薄壁球铁铸件缩孔和缩松形成的影响。
The influence of chemical composition, inoculation process, temperature of molten iron and pouring system on the formation of shrinkage cavity and porosity was described.
镜片注射模设计的关键在于浇注系统、排溢系统、模具刚度的设计及模具材料的选择、热处理。
The key of the injection mold for lens was the design of the runner system, exhaust system, rigidity, the choice of proper material and correct heat-treatment.
研制了一套多功能水模拟试验台，适用于重力铸造及低压铸造浇注系统和充型过程的水模拟试验。
Adapting to pouring system and filling mold water imitation of gravity cast and low pressure cast, the multi-purpose water imitation experiment set is studied.
采用差压铸造工艺，研究垂直缝隙式浇注系统浇注的铝合金硅铸件不同位置的组织和力学性能变化。
Different site microstructure and mechanical properties of aluminum-silicon alloy in differential pressure casting process were investigated. The gate system was adopted vertical slitting gate system.
根据均衡凝固技术关于大、中件内浇口要分散与“靠边”的原则，布置、设计出分散引入式浇注系统；
According to the principle of decentralized arrangement of internal pouring channel of proportional solidification technology, designed decentralized feed pouring system.
根据均衡凝固技术关于大、中件内浇口要分散与“靠边”的原则，布置、设计出分散引入式浇注系统；
According to the principle of decentralized arrangement of internal pouring channel of proportional solidification technology, designed decentralized feed pouring system.
应用推荐