在德国产流化床式AF G- 100气流磨内，对同一物料在不同分级轮转速条件下及不同物料在同一分级轮转速情况下，粉碎分级出的颗粒大小进行分析研究。
This paper studies particle size of both the same and different materials which were milled, graded and processed under different conditions, in AFG-100 gas stream mill made in Germany.
本文介绍循环流化床锅炉用外置式换热器的结构、性能、设计要点以及实际运行情况。
This paper introduces the structure, performance, key point of design and operation results of external heat exchanger in CFB boiler.
介绍了固定床工艺、流化床工艺、多管式反应器以及一步法甲醇制汽油（MTG）的工艺特点及其流程，并对几种工艺进行了比较。
In the paper, the process characteristic and flow of several major MTG processes including fixed bed, fluidized bed and multi-tube reactors are reviewed, and these processes are compared.
大型循环流化床锅炉高温再热器中所采用的不锈钢膜式壁管屏的制造工艺要点和难点，以及解决的工艺措施。
The article describes the critical and hard parts and technology measures of stainless steel membrane panel's manufacture, which be used in high temperature Reheater of large capacity CFB boiler.
本文提出了一种新型的应用多组分粒子流化床(MSFB)的半湿式烟气脱硫方法。
In this paper, a new kind of semi-wet flue gas desulfurization with a Multi-Solid Fluidized Bed (MSFB) was put forward.
在管内工质温度不同、容量不同的3台循环流化床锅炉上，测量了不同高度上膜式水冷壁的金属壁温。
The membrane wall's metal temperature was measured at different heights, of 3 circulating fluidized bed boilers, of different capacity, and with different working medium temperatures within the pipes.
随着循环流化床锅炉的大型化，外置式换热器的研究也越来越广泛和深入。
With the development of circulating fluidized bed boiler(CFB), the study field of external heat exchanger(EHE) is greater in extent and degree.
作者在试验基础上提出了一种用于循环流化床锅炉中的新型冲击式槽形管惯性分离器，它具有高效率、低阻力等优点。
Based on experimental test, a new impact type inertia separator with fluted tubes, with high efficiency and low pressure drop, used for circulation fluidized bed boilers is proposed by authors.
结果表明，当布风管间距与布风管外径比为3.2时，管式布风流化床比板式布风具有更好的混合效果。
Experiments showed that mixing property in pipe fluidized bed with relative distance of blowpipe equal to 3.2 is better than that of traditional platefluidized bed.
研究建立了描写三相生物流化床床层膨胀特性的经验关联式。
The formula of expansion characteristic in the three phase biological fluidized bed has been founded in this study.
在此基础上设计并开发了QLM系列微型流化床对撞式气流磨。
On its basis, QLM series fluidized-bed counter impact air-flow mills were developed.
采用冷渣器可回收流化床锅炉的灰渣余热，便于干式除渣及灰渣的综合利用。
The waste heat of ash and slag of fluidized bed boilers can be recovered by use of slag coolers, which also facilitates the adoption of dry slag removal method and slag comprehensive utilization.
针对流化床试验研究中测量颗粒浓度、颗粒速度的多种新兴的非浸入式测试技术进行了较为详细的论述。
In present paper an overview of advanced non-invasive measurement techniques which are used to measure the particles concentration and velocities in the fluidized beds are discussed.
热泵式流化床干燥装置干燥食品的突出优点是节能和食品干燥质量好。
The main advantages of heat pump fluidized bed in food drying are energy saving and good food quality.
通过在流化床中将碳酸钾溶液雾化后喷涂在处于流化状态的玻璃珠上，研究了流化床造粒过程的层式生长机理。
By spraying and coating the potassium carbonate solution onto the surface of glass spheres, the layering growth mechanism of granulating process was studied in fluidized bed.
报道了散式直管流化床处理含锗氧化锌烟尘的研究结果。
The Leaching of germanium bearing smoke of zinc oxide in the particulate fluidization bed was investigated.
鼓入热风型流化床炉，旋转式热处理炉，热处理装置以及热处理方法。
Hot air blow type fluidized bed furnace, rotary type heat treatment furnace, heat treatment device, and heat treatment method.
本文介绍了流化床中床料空隙率，气泡尺寸，气泡上升速度沿床高变化的试验结果，提出了相应的无因次关联式。
This paper reports some experimental results on variation of voidage in bed materials, bubble size and bubble rising velocity etc along the height of the bed.
通过分析对撞式流化床气流粉碎机的喷嘴结构、分级叶轮型式、加料口位置及底部结构等，阐述了该型气流粉碎机的结构型式及特点。
The paper presents the internal structures and performance features of the fluidized bed opposed jet mill based on the jet nozzles structure, impeller types, feeding inlet and bottom structure.
本文介绍了新研制的燃气流化床半预混金属风帽式布风板的结构及工作原理。
This paper introduces the structure and operation principle of the newly developed semi-premixing nozzle distributo(?).
本文给出了流化床风冷式冷渣器的排渣温度及其分布规律。
This paper gives the slag temperature profile of an air-cooled slag cooler used for fluidized bed boilers and its distribution pattern.
实验表明，应用二流体喷嘴可以生产磷酸一铵，应用管式反应器—流化床造粒器可以生产出符合要求的球粒状磷酸二铵。
Experiments show that the use of the two-fluid nozzle allows the production of MAP to be carried out, and the use of the pipe reactor-fluid-bed granulator produces the required spherical DAP.
实验表明，应用二流体喷嘴可以生产磷酸一铵，应用管式反应器—流化床造粒器可以生产出符合要求的球粒状磷酸二铵。
Experiments show that the use of the two-fluid nozzle allows the production of MAP to be carried out, and the use of the pipe reactor-fluid-bed granulator produces the required spherical DAP.
应用推荐