研究了三重环流生物流化床反应器混合特性。
Mixing characteristics of triplet loop biological fluidized bed reactors was investigated.
厌氧流化床反应器对蓝皮制革废水处理效果较好。
The effect of treatment of wet-blue waste water with the AFB is perfect.
介绍了聚丙烯流化床反应器流化特性和卸料过程；
The fluidizing characteristics and powder discharge process of gas fluid bed reactor with Hypol process were described.
对采用高效复合生物流化床反应器处理中高浓度废水进行了试验研究。
The study on high and medium density wastewater treatment has been carried out by using a highly-efficient compound fluidized bed bio-reactor.
聚乙烯装置流化床反应器浆液催化剂加料泵是一种结构特殊的单螺杆泵。
Slurry catalyst feed pump used in gas-phase flowing bed process of PE plant is a type of single screw pump with special structure.
利用人工神经网络的方法建立了工业合成丙烯腈流化床反应器的数学模型。
In this paper, a mathematical model is developed for an industrial acrylonitrile fluidized bed reactor based on artificial neural networks.
在实验室采用固定流化床反应器，研究了催化裂化汽油裂化时的焦炭生成。
Study of coke formation during FCC naphtha cracking was carried on a laboratory fixed-fluidized bed reactor.
总结了固体生物质热解液化装置——一套循环流化床反应器冷态实验的结果。
This study work illustrated briefly the fluidization characteristics of a CFB reactor, which is designed for the biomass fast pyrolysis.
本文介绍了丙烯腈装置流化床反应器操作条件的正交优化设计以及现场试验结果。
This paper introduces the orthogonal optimization experiment design of operating factors and the actual experiment results on a fluid bed reactor of acrylonitrile apparatus.
结果表明：以流化床反应器为核心的流化氮化新工艺合成条件温和、原料成本低、效果好。
The results show that the new fluid nitriding process, which the key component is the fluid bed reactor, could make synthesis condition assuasive , low cost and good effect.
在固定流化床反应器中，考察了胜利渣油经热接触改质过程处理后的产物分布及改质效果。
Thermal contact upgrading of Shengli residue has been examined in a fluidized fix bed reactor. The product distribution and the upgrading effect of Shengli residue has been measured.
采用厌氧流化床反应器(afb)作为厌氧氨氧化反应器，对垃圾渗滤液脱氮进行了研究。
An anaerobic fluidized bed (AFB) reactor was used as anaerobic ammonium oxidation (ANAMMOX) reactor. The nitrogen removal of leachate was studied in this reactor.
在国内外众多类型的生物质热裂解液化装置中，流化床反应器制造工艺比较成熟，应用较广泛。
Manufacturing engineering of the fluidized bed reactor is more riper than other biomass pyrolysis liquefaction set, and have more extensive application field.
本论文所研究的酸性气体净化方法是一种采用循环流化床反应器和钙基吸收剂的低温干法过程。
The acid gases removal method of this research is a low temperature, dry process that utilizes a circulating fluidized bed reactor and calcium-based sorbents.
以三种轻燃料油为反应原料，在实验室固定流化床反应器上用工业平衡催化剂进行催化裂化反应。
Three kinds of light oil were cracked as feedstocks on regenerated zeolite catalysts in a laboratorial fixed fluidized bed reactor.
在实验室小型固定流化床反应器上考察了工艺参数对国产GOR- Q催化剂降低催化汽油烯烃的影响。
Based on fixed fluid bed reactor and GOR Q catalyst, the influence of process parameters on decreasing gasoline olefin was studied.
下行循环流化床反应器要求气固分离器具有分离效率高、气相停留时间短、压力损失小、设备磨损小等特点。
New kind of gas-solid fast separator with high separating efficiency, short gas resident time, low pressure loss and long life is urgently needed to couple with concurrent downer reactor.
中试证实了实验室研究结果，证明了锥形厌氧生物流化床反应器是一种高效率处理工业有机废水的新型反应器。
The pilot experiment verified the results obtained in the lab. research of the CSAFBR, and proved that it's one of the new efficient biological processes treating industrial organic wastewaters.
为此，设计了一套连续给料的鼓泡流化床反应器，对废塑料在鼓泡流化床中热解的关键工艺参数进行了试验研究。
Therefore, a bubbling fluidized bed with a continuity feeder was designed. The key technical parameters of waste plastic pyrolysis in the bubbling fluidized bed were investigated.
为了对颗粒表面进行改性，在自行设计组装的流化床反应器中，利用化学气相沉积法(CVD)制备了不同的复合颗粒。
In order to modify the surface properties of the particles, composite particles are prepared by the process of Chemical Vapor Deposition (CVD) in a fluidized bed reactor.
流化床的一大优点在于能产生一个充分混合的具有很大表面积的流体与固体的接触系统，这对高效反应和传热都很有用。
A major advantage of fluidised beds is that they provide a well mixed, high surface area, fluid-solid system which is useful for efficient reactions and heat transfer.
流化床电化学反应器是一种新型的电化学反应器，具有活性面积大、质系数高等优点。
The fluidized-bed electrochemical reactor is a new type of electrocbemical reactor cbaracterized by large active surface and high mass transter coefficient.
流化床高度计算模型表明，床层高度主要受催化剂装填量、反应气体线速和催化剂粒度的影响。
The height computation model of fluidize-bed showed that the bed height is mainly influenced by catalyst filling amount, linear speed of reaction gas and particle size of catalyst.
现有粉体表面改性方法的具体实施是在反应釜、混合机、高速搅拌机、高速捏合机、液态流化床和高能磨中进行。
The methods of powder surface modification in existence are done in reaction kettle, blend machine, high speed mill, high speed crumb, liquid state jet mill etc.
本文在流化床中对活性炭、炭黑和碳纳米管等固体碳在甲烷裂解反应中的催化活性进行了研究。
Activated carbon (AC), carbon black (CB) and carbon nanotube (CNT) was employed to catalyze methane decomposition to produce COx-free hydrogen and solid carbon in a fluidized-bed reactor.
以一个鼓泡流化床为反应器，对生物质富氧—水蒸气气化制取富氢燃气的特性进行了一系列的实验研究。
The characteristics of biomass oxygen rich-steam gasification in a fluidized bed for hydrogen rich gas production were tested.
固体颗粒在两个流化床层之间循环，使得大型反应器中产生的或需供给的大量热量有传递的可能。
The circulation of solids between two fluidized beds makes it possible to transport the vast quantities of heat produced or needed in large reactors.
介绍了固定床工艺、流化床工艺、多管式反应器以及一步法甲醇制汽油（MTG）的工艺特点及其流程，并对几种工艺进行了比较。
In the paper, the process characteristic and flow of several major MTG processes including fixed bed, fluidized bed and multi-tube reactors are reviewed, and these processes are compared.
流化床催化反应过程、煤的流化床燃烧与气化等多种流化床工业应用都涉及高温操作。
The catalytic reaction process in fluidized beds, the coal combustion and gasification in the bed, and other various industrial processes all involve high temperature operation.
并对固定床、流化床和浆态床反应器的结构、生产能力、原料及产物组成和操作条件等进行了比较。
The fixed bed reactor, fluidized bed reactor and slurry reactors were compared on their structure, production capacity, materials, products and operating conditions.
应用推荐