一些企业从未达到现金流动控制。
相位对流动控制效果的影响不大；
The flow suppression effect is not sensitive to phase difference.
进行了大气压等离子体流动控制初步实验。
Elementary atmosphere plasma flow control experiment is performed.
这种性能为流动控制研究开辟了一个崭新的研究领域。
This capability opens up new territory for flow control research.
阐述了二维弱可压缩流体流动控制方程和大涡模拟湍流模型。
The weakly compressible fluid control equations and the large eddy simulation turbulence model are expounded.
进行了合成射流用于YLSG107翼型流动控制的实验尝试。
The control of flow on YLSG107 airfoil using synthetic jet actuator is investigated experimentally.
试验结果表明，所提出流动控制成形技术具有重要的应用价值。
The experimental results show that the FCF proposed here has important application values.
同时指出分步实施流动控制的过程也就是应对其重大技术挑战的过程。
Also presented are the steps of applying the technology, which will be a great challenge to key technology improvement.
飞格这个协约物流提供者，将原材料和所有信息及金融流动控制融为一体。
The contract logistics provider Fiege controls the material flows and all information and financial flows linked to the same.
介绍一种在非交错网格上，求解非正交曲线坐标系下的流动控制方程的方法。
This paper presents numerical solution for governing equation of flows in curvilinear coordinate system with nonstaggered grids.
以此为基础，构造了求解真实气体流动控制方程的高分辨率TVD数值格式。
And a numerical method with high resolution TVD schemes for solving the governing equations of real gas flows is developed.
通过风洞试验研究了前掠翼融合体无尾气动布局(FBB布局)的流动控制技术。
This article investigates the flow control technique of forward-swept wing blended body (FBB) tailless configuration by means of wind tunnel tests.
在静止的空气中诱导了流场，验证了应用辉光等离子体实现主动流动控制的新思路。
The flow was induced by plasma, which confirms that active flow control can be come true by applying glow plasma.
面向主动流动控制研发了气泡型微致动器及其阵列技术和MEMS合成射流器技术。
Based on MEMS technology, micro balloon actuator arrays and synthetic jets were developed for active control of flow over an airfoil.
本文详细地论述了一维两相喷管流动控制方程的数值解方法，给出了数值计算举例。
In this paper, a numerical method for calculating one-dimensional two-phase nozzle flow is described in detail and the numerical calculation example is given.
采用有限容积法在交错网格上对流动控制方程离散，然后采用SIMPLE算法求解。
The finite volume method is used to discrete the flow controling equations on staggered grid and the SIMPLE algorithm is adopted to solve the equations.
提出了流动控制成形力的计算公式、控制腔位置的判断准则及其形状和尺寸的设计方法。
The equations for forming force of flow-controlled forming, the criterion for control chamber position and the design methods for shape and dimension design are presented.
采用的新技术包括中间罐冶金、中间罐快速更换，结晶器内钢水流动控制、轻压下等工艺。
The new technologies include tundish metallurgy, quick-change tundish, steel stream control in mould and soft reduction etc.
还公开了一种用于验证流动控制装置(10)的至少一个部件正在预定工作范围内工作的方法。
Also disclosed is a method for verifying that at least one component of a flow control apparatus (10) is functioning within a predetermined operational range.
在越南，改进农场卫生、农作方法、开展家禽流动控制和接种疫苗活动，这一切将会减少禽流感爆发的频度。
In Viet Nam, improved on-farm hygiene, farming practices, poultry movement controls and vaccination campaigns will reduce the frequency of bird flu outbreaks.
实验证明：所开发的气泡致动器可以有效地进行延迟分离，降低压差阻力，实现了主动流动控制。
The experiment results demonstrate that the balloon actuators can be used for separation delay and drag reduction to realize active flow control.
一种水下采油树，它在水平轴线上装有总闸门和流动控制设备，以便最大限度地降低装置的高度。
Christmas tree design for subsea applications, configured with the master valves and flow-control equipment on a horizontal axis to minimize the assembly height.
本文主要介绍用可编程序控制器在轮胎平衡检测系统的物料流动控制，使物料合理流动，提高检测效率。
The paper introduce mainly flow of tyre by PLC(programmable logical controller)in balance test of tyre, in order to put tyre to reasonable flow and to improve efficiency of balance test.
通过试验表明，所开发的流动控制成形技术可节约原材料、提高工作效率及产品质量，具有显著的技术经济效益。
It is shown by tests that the developed flow-controlled forming technology can save materials, improve efficiency and quality, and has great technical and economic benefit.
并指出，随着研究工作的深入，该项技术还可望用于高马赫数飞行体表面气体流动控制、火箭发动机推力方向控制等。
Along with the deep development of study, the microjet technology will be possibly applied to control the aerodynamic flow of the high speed aircraft surface and the thrust vector of rocket engine.
提出了该涂料的固化可通过优化催化剂用量和固化条件来控制，流挂可通过添加流动控制剂来控制，并列举了它们的试验结果。
The curing process can be controled through optimum catalyst amount and curing conditions, sagging can be controled by rheology control agent. The test results were listed.
使用有限法求解不可压缩牛顿流体流动控制方程，用体积函数法跟踪金属液自由表面的移动，预测了机体充型过程的流动速度场和温度场。
The incompressible, Newtonian fluid flow equations are solved using finite element method. The free surface motion of molten metal is tracked by the volumetric function approach.
使用有限法求解不可压缩牛顿流体流动控制方程，用体积函数法跟踪金属液自由表面的移动，预测了机体充型过程的流动速度场和温度场。
The incompressible, Newtonian fluid flow equations are solved using finite element method. The free surface motion of molten metal is tracked by the volumetric function approach.
应用推荐