土壤液化是指在类似地震一类的事件中，土壤的强度或刚度减弱，土壤开始像液体般流动。
Soil liquefaction is the process by which the strength or stiffness of soil is weakened by an event like the shaking of an earthquake. The soil begins to move like liquid.
此刻它已自身的“强度”而存在，因为你们在工作，在成长，以超越“旧世界”的流动和所有它所带来的影响。
It is present in it's intensity at this time because you are working and growing beyond the old flow of the world and all that came with that.
一般而言，大多数热塑性材料具有较高的抗冲击强度、耐腐蚀性以及良好流动性使其容易加工而适于复杂成型设计。
In general, most of the thermoplastic materials offer high impact strength, corrosion resistance, and easy processing with good flow characteristics for molding complex designs.
研究表明制品在各流动方向上的弯曲强度有很显著的差别。
Results showed that the flexural strength of ESMC parts was different at different direction of fiber orientation.
检验了坍落度、流动性、综合强度和氯离子扩散作用。
Slump, slump flow, comprehensive strength and chlorine diffusion are tested.
采用等温恒应变速率压缩试验对7A60超高强度铝合金的流动应力进行了研究。
The flow stress of 7A60 ultra high strength aluminum alloy was studied by isothermal compress test at constant strain rate.
闭孔珍珠岩克服了传统膨胀珍珠岩吸水率大、强度低、流动性差的特点，延伸了膨胀珍珠岩的应用领域。
Closed pore perlite overcome traditional expansion perlite bibulous rate and low strength of large, fluidity, and the characteristics of the poor, outspread expansion perlite application fields.
所研究的水泥浆配方体系具有：可流动时间长、沉降轻微、塑性粘度和屈服值小及凝固后具有较高的抗压强度等特性。
The formulation system is of the characteristics of long mobile time, light settling, small plastic viscosity and yield value, higher compression strength etc.
采用等温恒应变速率压缩试验对超高强度铝合金的流动应力规律进行了研究。
Based on the isothermal constant strain-rate compression tests, the flow stress of a ultra high strength aluminum alloy was researched.
构件强度失效(破坏)的形式(流动或断裂)与材料的力学性质、应力状态有关。
The form (flow or break) of strength failure in structural component is connected with the mechanical property and the stress state of the material.
用熔体流动速度和粘结强度表示试样的特征。
The sample was characterized by melt flow rate and adhesion strength to aluminum.
动叶尾迹强度明显减弱，叶背流动分离得到抑制，叶尖泄漏涡也得到了周期性的抑制。
The intensity of rotor wakes was reduced, flow separation on rotor suction side was suppressed and the tip leakage flow was suppressed periodically.
水泥添加剂用来改变水泥的密度、凝固时间、抗压强度、流动性能和脱水率，并用来使水泥膨胀以及降低水泥成本。
Cement additives are used to change the cement's density, setting time, compressive strength, flow properties and dehydration rate, to cause the cement to expand, and to reduce the cost of the cement.
最终，建立了改性硝酸铵的脱水性能、流动性能、凝固性能、颗粒强度的评价方法，并进行了工业化可行性研究。
The feasibility of industrialization of modified ammonium nitrate for agricultural use is studied by the evaluation of dehydration capacity, fluidity, agglomeration and granular strength.
减阻杆削弱了旋风分离器内部流动的湍流强度，使湍流能量耗散减少。
The other is the action of weakening turbulent intensity by the Repds, which reduces the energy dissipation of the cyclone flows.
研究了高宽比和壁面粗糙度对压力损失、二次流动和紊流强度的影响。
The influences of the aspect ratio and wall roughness on the coolant flow characteristics, which mainly involve pressure loss, secondary flow and turbulence intensity, were investigated.
该产品具有良好的高温流动性，较短的硬化时间，较高的烧结强度优质的耐侵蚀性能。
It has a good high tenperature flow ability short setting time, rignersintered strcngth and high corrosion resistance.
填充体质量控制的目标是：填充体具有一定强度、充填材料成本低、流动性好、不脱水或少量脱水。
The quality control aims to make backfill body meet its strength requirements and allow backfill material to have a low lost and a good fluidity and dehydrate a little or not.
通过大量实验阐述了RPC -活性粉末混凝土配制过程中，各种组分对其浆体流动性和硬化体强度的影响，就其机理进行讨论。
Through a great number of experiments, the influences of the components to paste flow and concrete strength during RPC compounding were illustrated, at the same time, we discussed the mechanism.
通过熔体强度、熔体黏度测试和熔体流动速率(MFR)、凝胶含量的变化研究了试剂体系对接枝交联改性的作用。
The effects of the agent system on the modification were investigated by testing melt-strength, melt viscosity, the changes of melt flow rate (MFR) and gel content.
使薄壁成型提高注塑流动性，提高产品品质和强度。
Make thin walls formed, so as to improve the fluidity in injection molding and product quality and strength.
本文测试了矿渣细度对高强混凝土流动性和抗压强度的影响。
The effect of fineness of slag on the workability and compressive strength of HSC is tested.
试验表明，随粉煤灰掺量的增加，硬化体抗压强度、浆体流动度降低，而凝结时间延长，结石率和粘度增大；
The results show that with the increase of fly ash proportion the concretion strength and serum fluidity decrease, while setting time, hardening rate and viscidity increase.
论述了浮选槽的结构特征以及浮选槽中浆流速度、湍流强度和流动方向等特征对浮选脱墨流体动力学的影响。
The effects of flow velocity, turbulence level and flow direction in the cell on hydrodynamics of flotation deinking were also discussed in this paper.
讨论了壁面热流、壁面温度及流动阻力对无因次熵产强度的影响。
The effects of the heat flux, wall temperature and flow resistance on the nondimensional entropy generation density have been discussed.
采用灰色关联分析方法研究粉煤灰水泥颗粒群堆积密度对粉煤灰水泥强度与流动度的影响。
It studies on the influence of the heaped density of pulverized fuel ash cement granular group on pulverized fuel ash cement strength and fluidity by gray connected analysis method.
试验结果表明：X型开缝翅片的波动强度、流动阻力大于圆弧型开缝翅片，但前者的换热性能和场协同性优于后者。
The experiment results showed that the fluctuation intensity and pressure drop of the X-type slotted fin surface were higher t.
主要研究了聚丙烯纤维(PPF)对磷酸盐混凝土性能如流动性、可操作时间、抗折和抗压强度的影响。
Effects of polypropylene fiber (PPF) on properties of phosphate cement-based concrete, such as flowability, operable time, flexural and compressive strength were investigated.
本文通过对北京市流动人口的平均滞留时间和相对滞留强度的定量分析，提出有针对性的政策建议。
By quantitative analysis on mean staying time and intensity of floating population in Beijing, This article puts forward corresponding policy recommendations.
本文通过对北京市流动人口的平均滞留时间和相对滞留强度的定量分析，提出有针对性的政策建议。
By quantitative analysis on mean staying time and intensity of floating population in Beijing, This article puts forward corresponding policy recommendations.
应用推荐