在此基础上，引入流体流动模拟分析技术，研究了油气运移方向。
Fluid flow simulation analysis technology is introduced to study the direction of hydrocarbon migration.
文中概括了近年来焊接熔池传热与流体流动模拟所取得的一些进展，总结了影响熔池传热和流体流动的一些主要因素。
In this paper, some progress attained in recent years on heat transfer and fluid flow in weld pool was summarized, then generalized the factors that influenced heat transfer and fluid flow greatly.
对不同入口气体速度、初始颗粒尺寸分布和不同颗粒团聚形成机理下收集器内颗粒聚团流动的流体动力特性进行数值模拟。
The hydrodynamics of particle agglomeration flow was numerically simulated at the different inlet gas velocity, initial particle size distribution and type of agglomeration mechanisms in the absorber.
综述了在连铸数值模拟过程中，为评估流体流动对铸坯热量传递和凝固过程影响所开发的有效导热模型和耦合模型。
The effective thermal conductivity model and coupled model were developed for simulating the influences of fluid flow on heat transfer and solidification in continuous casting process.
油藏数值模拟是以多相流体在多孔介质中流动的理论为基础，目前已广泛应用于油藏工程。
Reservoir numerical simulation is based on the theory of multiphase fluid flow in porous media. Now it has been used in reservoir engineering extensively.
文章介绍一种能模拟地下流体径向流动状态的岩心夹持器的设计思路，并结合图示做了详尽说明。
This paper introduces the design of the radial and multiple-layer core gripper, which can be used to simulate the radial flow status of the reservoir fluid.
本文对旋流排淤器周围流体的流动进行了数学模拟，应用有限元方法计算出其周围的流速场和压力场。
This paper considers numerical simulation of the threedimensional radial flow for the fluid around the desiltor, then the circular flow is added in order to generate the spiral flow.
通过不同粘度流体的岩心流动模拟实验，揭示粘度变化对流体渗流及开发效果的影响。
The influence of viscosity change on fluid percolation and development response is revealed through core flow test with fluids of different viscosity.
利用FLUENT软件的流体流动和传热问题的微观模拟功能，找到换热器内部的温度分布。
And it also makes use of the microscope simulation ability of FLUENT software on liquid flow and conduct heat.
阐述了二维弱可压缩流体流动控制方程和大涡模拟湍流模型。
The weakly compressible fluid control equations and the large eddy simulation turbulence model are expounded.
介绍聚合物复杂流体流动问题的模拟方法。
Numerical methods for the simulation of the flow of polymeric complex fluid has been reviewed in this paper.
应用湍流数学模型和流体体积法模拟孤立波翻越防波堤的流动和自由表面变化。
The free surface flow of a solitary wave overtopping an erect breakwater was simulated using turbulent model and the VOF method.
分析了流体的非稳态流动及颗粒的密度分布对模拟结果的影响。
The influence of non-uniform flow and particle density distribution on the simulation results was discussed.
利用耗散粒子动力学（DPD）对方形通道内流体流动进行了模拟。
The fluid flow in a square channel was investigated using dissipative particle dynamics(DPD).
介绍了一种用于模拟A TM网中的分组复用语音流传输的模型：流体流动模型。
In this paper, a model for packet voice multiplexing system of ATM was introduced, which is called a fluid flow model.
本文应用计算流体力学的理论和方法模拟了带内热源的三维空调房间室内气流的湍流流动。
This paper is an application of Computational Fluid Dynamics in the turbulent flow of a three-dimensional air-conditioned room in which there are heat sources.
并给出了平板非等温流体绕流流动现象的模拟结果；
Simulation results for non-isothermal flow pass plate have been shown.
采用多孔体模型对流体在棒束间的复杂流动传热进行了模拟计算，并将模拟计算结果与实验数据进行了比较。
The porous thermal hydraulic model is used to calculate complex fluid flow and heat transfer in rod bundle. The simulating calculation is verified through experiment.
油藏数值模拟方法迄今为止定量地描述在非均质地层中多相流体流动规律的惟一方法。
Oil field numerical simulation is the only approach till now to quantitatively describe the fluxion pattern of multiphase fluids in heterospheres.
对固定床中流体与换热管呈错流流动的传热进行了实验研究，并以二维传热模型进行模拟。
An experimental study was conducted on the cross-flow heat transfer in a fixed-bed, and simulated by a two-dimensional model.
利用计算流体动力学(CFD)软件，建立了催化转化器流场的二维模型，对催化转化器的稳态流动进行了数值模拟。
A two-dimension model for the flow field in catalytic converter was established, and the steady state flow was simulated with the computational fluid dynamics (CFD) code.
本论文应用计算流体力学的理论和方法模拟三维较复杂条件下空调房间室内空气流场的湍流流动。
This paper is an application of Computational Fluid Dynamics in the turbulent flow of three-dimensional air-conditioned room.
第二部分用STAR - CD流体软件对可变式进气歧管进行空气流动数值模拟分析。
The second part carries on the air fluid simulation analysis of variable intake manifold with the STAR-CD fluid software.
对圆柱形和圆锥形太阳能吸收式制冷系统涡旋发生器内流体流动特性进行了数值模拟。
The fluid flow characteristic in cylindrical generator and conic generator of a new solar absorption refrigeration system is simulated using FLUENT software.
采用计算流体力学方法(CFD)，对传热管外液体流动过程进行了模拟研究。
In this paper, the process of the liquid flow on the heat tube surface was carried out using computational fluid dynamics (CFD) simulation method.
方法：用磁共振相位对比电影法测定模拟脑血液流动的管状模型稳态流动下流体信号强度，并与相应的速率进行相关性分析后分别得出相应的转换函数关系。
Methods: tube flow phantoms which simulating the cerebral blood flow were established. Flow signal intensity of the steady flow in tubes was measured by MR phase-contrast cine technique.
采用流函数-涡量法对粘性不可压缩流体的二维瞬态流动进行模拟计算。
The stream function-vorticity method has been used to simulate two-dimensional transient state of incompressible viscous flow.
提出了全封闭活塞式压缩机热力性能和流体流动的CFD模拟方法。
A numerical method for simulating the thermal and fluid-dynamic behavior of hermetic compressors by using CFD in the whole compressor domain are presented.
本文利用计算流体力学方法对空调器贯流风机系统内部气体流动进行了数值模拟；
In the text the internal flow of cross-flow fan is simulated with Computational Fluid Dynamics.
建立了描述外磁场作用下温度敏感型磁流体热磁对流特性的数学模型，数值模拟了回路中热磁对流的流动与传热特性。
A mathematical model is established for investigating the characteristics of thermomagnetic convection in the temperature-sensitive magnetic fluid in the presence of an external magnetic field.
应用推荐