在活塞缸的下端设有缺口。
实例表明，该方法能够有效地诊断出柴油机活塞缸套的磨损故障。
Actual applied instance indicates that this method can effectively diagnose the faults of piston-liner wear.
并根据计算结果，对由活塞缸引起的引信失效原因进行了详细的分析。
The mechanics analysis is done on the piston jar with the ANSYS software, and the reasons of the fuze failure caused by the piston jar are an…
并根据计算结果，对由活塞缸引起的引信失效原因进行了详细的分析。
The mechanics analysis is done on the piston jar with the ANSYS software, and the reasons of the fuze failure caused by the piston jar are analyzed in more detail ba...
活塞缸是准流体保险机构中重要的机械零件，其力学性能对引信功能的影响非常大。
Piston jar is the important part of the quasi fluid safety mechanism. Its mechanics property affects the fuze's function greatly.
每个气体调节器包括可密封阀，所述阀限定输入和输出，且每个阀包括具有活塞缸和活塞杆的活塞。
Each gas regulator includes a sealable valve that defines an input and an output, with each valve including a piston having a cylinder and a rod.
介绍了多缸柴油机（6 135G）的超磨耗标准的活塞缸套间隙进行状态监测及故障诊断的研究。
The paper describes the research and analysis of fault monitoring and diagnosing ultra cylinder clearance for the multi-cylinder diesel engine model C6135G.
机架上装有上下两个限位开关，以控制换向阀改变切胶刀的运动方向，同时，也可保护活塞缸缸盖。
On the frame, with two limit switch to control the reversing valves change rubber cutting knife movement direction, at the same time, also can protect the piston cylinder cylinder.
机架上装有上下两个限位开关，以控制换向阀改变切胶刀的运动方向，同时，也可保护活塞缸缸盖。
Two limit switches are installed on the frame to control the reversal valve to change the movement direction of the rubber knife, at the same time it protects the cover of the cylinder.
本文讨论了活塞撞击引起的发动机振动特性，指出利用表面振动信号判断活塞缸套间的间隙状态是可行的。
Based on the engine vibration character induced by the piston impact on the cylinder, it is practical to judge the clearance condition between them by engine surface vibration intensity.
弹簧邻近所述活塞以迫使所述活塞缸离开所述相应的入口，而垫片贴近所述弹簧，以调节所述弹簧施加在所述活塞缸上的力。
A spring is adjacent said piston to force said piston cylinder away from said corresponding inlet, and a shim proximate said spring to adjust the force applied by said spring on said piston cylinder.
该文利用ANSYS软件，对活塞缸进行了力学分析；并根据计算结果，对由活塞缸引起的引信失效原因进行了详细的分析。
The mechanics analysis is done on the piston jar with the ANSYS software, and the reasons of the fuze failure caused by the piston jar are analyzed in more detail based on calculation results.
应彻底清洗所有和物料接触的部件，包括活塞缸、活塞头、O型圈、单向阀、灌装头、料桶、料斗等，发现破裂损伤的密封应及时进行更换。
Thoroughly clean all parts exposed to material, including piston barrel, piston head, O-ring, one-way valve, filling head, feeding tank, hopper, etc. Damaged seal shall be immediately replaced.
检查(泥浆)泵缸套和活塞。
液压升降机中使用的液压油缸，其组成部分通常有五部分：活塞和活塞杆、缸筒和缸盖、缓冲装置、密封装置、排气装置。
The use of hydraulic cylinder in hydraulic elevator, the part usually has five parts: piston and piston rod, cylinder and cylinder head, buffer device, sealing device and exhaust device.
再次老旧车可以适当选用黏度稍大点的机油来增加活塞、缸壁间的密封性。
Again the old car you can choose appropriate viscosity of older oil to increase the sealing performance of the piston and cylinder wall between.
往复泵的流量与压头无关，与泵缸尺寸、活塞冲程及往复次数有关。
Reciprocating pump flow and pressure head has nothing to do with the pump cylinder size, and the reciprocating frequency of the piston stroke.
另一种顶棒可以直接和液压缸活塞偶合所以可以实现顶料系统的向前和向后运动。
Alternatively the ejector rod may be coupled directly to the hydraulic ram so that forward and rearward movement of the ejection System may be achieved.
检查一下缸套和活塞。
其上、下液压缸活塞交替往复运动，实现了带负载持续上升(下降)和快速作业。
The pistons of the upper and lower hydraulic cylinder make reciprocating motion alternatively to realize on-load continuous rise (drop) and quick operation.
当驾驶员踩下制动踏板时，制动液由于主缸的作用进入轮缸，推动两个活塞向外侧移动。
When brake pedal is pushed by the driver, brake fluid is forced into the brake cylinder by the action at the master cylinder, and the two pistons are forced outward.
碳素压球机液压保护装置是由液压泵将高压油打入液压缸，使活塞产生轴向位移。
Carbon pressure ball machine device is a hydraulic pump hydraulic protection will be high pressure oil into the hydraulic cylinder, driving the piston produce axial displacement.
介绍了掘进机液压缸与活塞处的密封结构形式以及使用。
The seal between piston and hydraulic cylinder used in development machines, structure forms and operations are introduced.
选择柴油机缸套—活塞副运行工况中的磨损状态和磨损超限状态进行了研究。
The wear state condition of diesel cylinder-piston pair was studied, and the monitoring of cylinder-piston pair under the extreme condition was discussed.
同时，也会造成内燃机过热、活塞(环)卡缸、熔着磨损以及活塞环断裂等事故。
Meanwhile, it causes engine overheat, blockage piston (ring) in the cylinder, melting to wear and damage piston ring.
另一端由一个弹簧托住，与液压缸的活塞相接。
A spring holds the other ends in contact with the piston of a hydraulic cylinder.
活塞，用于制造该活塞的方法，和设置有该活塞的缸组件。
Piston, method for manufacturing the same, and cylinder component with the same.
系统地阐述了发动机缸套活塞组瞬态摩擦力的测量方法。
This paper introduces systematically the method for measuring the instantaneous friction force of cylinder liner-piston pair in the engine.
系统地阐述了发动机缸套活塞组瞬态摩擦力的测量方法。
This paper introduces systematically the method for measuring the instantaneous friction force of cylinder liner-piston pair in the engine.
应用推荐