这样活塞杆就会产生疲劳断裂。
更换活塞杆，在活塞杆上增设流道。
正如在其孔活塞杆，曲轴旋转。
那么活塞杆是如何进行电镀的呢？
温润303不锈钢活塞杆。
对阀盘、耳轴活塞杆头的染料渗透剂测试。
Dye-penetrant testing of the disc trunnions and piston rod heads.
活塞杆与介杆为卡箍连接，可实现快速拆卸。
The piston rod includes an intermediate rod, that allows quick assembly & disassembly.
活塞杆运行时严禁向送料口伸入头手或送料。
Avoid put hands or head into the feed port when the piston rod is running.
活塞与活塞杆连接。
可以在没有伺服回路的控制电压时激活活塞杆。
It can be used to energise the plunger cylinder if the control voltage of the servo circuit has failed.
在每个伺服控制器活塞杆上安装扰流板保险卡箍。
SPOILER is installed on the piston rod of each servo-control.
活塞杆的位置是通过一个线性位置传感器测量的。
The position of the plunger cylinder is measured by a linear position transducer.
正如在其孔活塞杆，曲轴旋转，加压相反的孔反转旋转。
As the piston strokes in its bore, the crankshaft rotates, pressurizing the opposite bore reverses rotation.
电机停止，活塞杆能自锁在任意位置上，处于保压状态。
When the motor stops, the piston rod can self-lock at any locations, in the state of pressure keeping.
此种表面防护层的应用，使得活塞杆具有相当的耐腐蚀性。
The type of surface finish applied to the rod determines to a great extent the corrosion resistance of the piston rod.
气缸的踝足矫形器功能还包括一个不锈钢管，辊磨光活塞杆。
The AFO cylinder features include a stainless steel tube and roller burnished piston rod.
用金相显微镜和电子探针对新氢压缩机活塞杆断口进行了分析。
The fracture of piston rod of new hydrogen compression pump is studied by metallography and electron probe in this paper.
家轿后减振器活塞杆在进行旋转弯曲疲劳试验时出现早期断裂。
The piston rod of family sedan's rear snubber fractured duringearlier stage of rotary bending fatigue test.
为合理设计活塞杆的截面及研究活塞杆的断裂因素，提供了依据。
This offered the basis for designing the section reasonably and analysing the failure of piston rod.
当活塞下行时，棘轮连接活塞杆和发动机轴，因此将功率输送出去。
As the piston descended, a ratchet engaged the piston rod and engine shaft and thus power was transmitted.
在支腿垂直油缸上装有液压锁，能可靠地防止行驶时支腿活塞杆伸出。
A hydraulic lock is installed on the vertical leg cylinder to avoid extending of the leg piston rod in operation.
活塞杆镀铬层的气密性问题，是航空工厂长期存在的一个老大难问题。
The airtight function of chromium plating for piston rod is a knotty technical problem for aircraft factories.
适用于液压缸活塞杆往复运动用密封装置，也可用于法兰端盖的静密封装置。
Apply to reciprocating motion of hydraulic cylinder piston rod sealed device can also be used to cover the static flange seal.
液压流体动力。弹性体塑料面密封件的汽缸。尺寸和公差。活塞杆密封汽缸。
Hydraulic fluid power - housing for elastomer - energized, plastic - faced seals - dimensions and tolerances - rod seal housings.
可以控制油液流如液压缸的其中一端，在活塞杆上产生一个拉力或产生一个推力。
Flow into the cylinder can be directed to either end, producing either a pushing or pulling force at the piston rod end.
分析了活塞杆与铲头碰撞点的选择方法和氮气室的初始压力和初始容积的确定方法。
Analyse choice method of collision point of cylinder and shovel head and confirm initial pressure and volume of nitrogen chamber.
配置有高强度烤漆钢板水箱，SUS304不锈钢活塞杆及双头均可活动的高压管。
Equipped with the steel water tank which is of high strength baking finish, stainless steel plunger (SUS304) and pressure pipe with two moveable ends.
双活塞杆提供了高度的抗弯曲和扭转刚性，保证了气缸的使用寿命和卓越的导向性能。
Double piston pole supplies high anti-bending and anti-torsion, which can ensure the service life and excellent guiding performance of cylinder.
双活塞杆提供了高度的抗弯曲和扭转刚性，保证了气缸的使用寿命和卓越的导向性能。
Double piston pole supplies high anti-bending and anti-torsion, which can ensure the service life and excellent guiding performance of cylinder.
应用推荐