我们是否应该了解泰勒级数?
格式精度分析采用泰勒级数展开的方法。
本文把泰勒级数校正法用于混合型问题。
In this paper, Taylor series correction method was applied to mixed-mode problems.
泰勒级数的效率也无法与现代桌面芯片的内置正弦函数相比。
The Taylor series is also inefficient compared to the built-in sine function of a modern desktop chip.
麦克阿瑟推测,竟争方程应被看作为泰勒级数的首要元素。
Macarthur surmised that competition equations should be considered as first elements of a Taylor series.
所论方程组被转换成增量形式,而解被表示成泰勒级数。
The sets were transferred into incremental form and their solutions into Taylor expansions.
利用重力场的泰勒级数展开式,可求出重力异常的四次导数。
The forth derivative of gravity anomaly can be obtained by Taylor series expansion of gravity field.
通过对正弦波进行泰勒级数插值,使信号源的精度得到改进;
The precision of the signal generator is improved significantly with Taylor series corrected method.
利用泰勒级数导出了阿基米德齿轮滚刀造形误差的近似公式。
This article USES Taylor Progression to figure out the approximate formula of the forming errors of Archimedes gear hobs.
利用泰勒级数展开的高斯迭代方法,高精度拟合工程实验数据。
Using the method of Taylor series expansion's Gaussian iteration, intend to match the engineering experiment data in high accuracy.
然后提出了田面微地形产生的流量偏差率公式,并用泰勒级数展开;
The calculation formula of the flow deviation rate of the emitter, which was from the farmland micro-terrain, was proposed and developed by the formula of Tailor.
以泰勒级数法的理论模型为基础,研究它在纯方位TMA中的应用问题。
Based on the theoretical mathematical procedure, investigating the application of the Taylor -series method in bearings-only TMA.
用代数动力学方法求得了用泰勒级数表示的局域收敛的常微分方程的精确解。
By algebraic dynamical method, the exact analytical solutions of the ordinary differential equations are obtained in terms of Taylor series with local convergent radius.
用泰勒级数法推出直角坐标系下亥姆霍兹方程的七点差分格式和九点差分格式;
The seven-grid difference format and nine-grid difference format of Helmholtz equation in right coordinate in the way of Taylor series method have been derived.
运用泰勒级数展开,可将天线理想波谱表示为误差算子和近场测量数据的形式。
The ideal spectrum of the antenna is presented by using the data measured and the error operator with the Taylor series expansion.
本文将非线性观测值函数泰勒级数展开,并取至二次项,得到线性一二次项形式。
This paper expands the non-linear observation function in Taylor's series, takes to the quadratic term and obtains the form of the linear-quadratic term.
在分析机构导航误差的基础上,提出用泰勒级数展开法对机构导航系统的误差进行定性分析;
The qualitative error analysis of the mechanical navigation system was implemented using Taylor series expansion method after introduction of the system characters.
提出一种新的极性识别方法,避免了复杂的泰勒级数运算,提高了运算效率,降低了程序量。
A new method of polarity identification is presented, therefore the complex Taylor series is avoided, the efficient is improved and the procedure quantity is reduced.
首次选取泰勒级数的部分二次项,用一个距原点最近点处拟合的超低维曲面近似极限状态面。
Firstly part of quadratic term of Taylor series is chosen; a low-dimension surface is used to approximate limit state surface; and the modified reliability formula is derived.
在估计过程中交直流方程交替求解,并对直流方程采用保留泰勒级数展开式中所有高阶项的方法。
In the process of state estimation, AC and DC equations are solved in turn, keeping all high order derivatives of Taylor series for the DC equation.
文中提出一种新的极性识别方法,避免了复杂的泰勒级数运算,提高了运算效率,降低了程序量。
A new method of polarity identification is put forward, therefore the complex Taylor series is avoided, the efficient is improved and the procedure quantity is reduced.
新方法首先通过阵列方向矢量的泰勒级数展开获得关于分布源中心DOA的两个近似旋转不变关系。
The new method firstly obtains two approximate rotational invariance relations about distributed sources central DOA by the Taylor series expansion of array steering vector.
模型的基础上,泰勒级数的系数调整控制功能的迭代学习法律,学习增益矩阵,通过LMI优化设计。
Based on the model, the Taylor series coefficients of control function are adjusted by an iterative learning law and the learning gain matrix is designed via LMI optimization.
在此基础上,使用泰勒级数展开算法和二次WLS估计求解非线性定位方程组,以获得更高的节点定位精度。
On the basis of this, both the Taylor series expansion algorithm and two-times WLS estimation are applied to optimize the location estimation.
分析并与直接泰勒级数展开法比较了计算精度和运算速度,验证了其具有精度高、速度快、编程简便等优势。
The accuracy and the error of the method are analyzed. Results show that it has characteristics of high precision, fast speed and easily programming.
实验证明,该方法的定位误差性能优于单纯的TDOA定位方法及静态定位方法中泰勒级数展开法的误差性能。
Simulations showed that the performance of the proposed tracking method was better than the TDOA tracking method and the static location of Taylor series expansion algorithm.
采用对油膜压力进行泰勒级数展开的方法,导出了油膜对镜板的作用力和油膜对可倾瓦的力矩的刚度阻尼系数。
Stiffness and damping coefficients of force for film on mirror plate and moment of force for film on tilting pads are derived by making use of Taylor series expression of film pressure.
本文从调压室的基本微分方程出发,采用泰勒级数展开式推导了阻抗式和简单式调压室甩荷时水位波动的显式计算方法。
The explicit method for calculating surges in throttled surge tank and simple tank following load rejection has been derived by use of Thaler Series Expansion from the basic formulation of surge tank.
本文从调压室的基本微分方程出发,采用泰勒级数展开式推导了阻抗式和简单式调压室甩荷时水位波动的显式计算方法。
The explicit method for calculating surges in throttled surge tank and simple tank following load rejection has been derived by use of Thaler Series Expansion from the basic formulation of surge tank.
应用推荐