该汽缸活塞杆由碳钢制成，外著一层防护涂层，以增强其运转性能并使其具有防腐功能。
The cylinder piston rod is made of carbon steel and is provided with a surface coating to improve the running characteristics and to prevent corrosion.
活塞在汽缸内部往复运动。
填充汽缸的蒸汽将活塞推出。
于是，气压就会再次将活塞推至汽缸底部。而假如有诸如水泵这样的物体与活塞连接，就可以在活塞的带动下完成一些工作。
Atmospheric pressure then pushes the piston back down the cylinder, and if anything (such as a pump) is attached to the piston, some useful work can be done.
蒸汽机的核心是汽缸。它一端密封，另一端有个可以移动的活塞。
The core of a steam engine is a cylinder that is sealed at one end and has a moving piston at the other.
这种混合物进入汽缸，在那里发生爆炸，从而对活塞施加力。
This mixture passes into the cylinder, where it is exploded and exerts force on the piston.
如果发动机温度太高，活塞就会膨胀，也就不能再汽缸里运动。
If the engine temperature is too high, the pistons would expand and could not move in the cylinders.
在汽车工业上活塞环镀锡和汽缸壁镀锡可防止滞死和拉伤。
In the automobile industry piston ring tin and cylinder walls tin can prevent sluggish death and injury.
对压缩机汽缸的科学设计以及电机、活塞环、传动系统质量的控制，能够大幅提高单位功率下的产气量。
Compressor cylinder to the scientific design and motor, piston, transmission system of quality control, can greatly improve the gas production unit power.
原动机驱动在汽缸内的活塞，交替地吸入和排出工艺流体（图）。
The driver moves the piston inside the cylinder, alternately pulling in and pushing out the process fluid (Fig. ).
松孔镀铬层应用于受重压的滑动摩擦件及耐热、抗蚀、耐磨零件，如内燃机汽缸内腔、活塞环等。
Loose hole plating chromic layer by weight used in the sliding friction parts and heat resistance, corrosion, wear parts, such as internal combustion engine cylinder lumen, piston rings.
以12v180型柴油机的汽缸套为例，用有限元法对该缸套进行了动力分析，并对引起缸套振动的活塞冲击力的处理进行了探索性的研究。
Makes dynamic analysis of 12v180 diesel engine cylinder liner by using FEM and conducts development study on piston impact forces resulting in cylinder liner vibration.
活塞然后移动备份汽缸燃烧的燃料弹出另一个循环准备。
The piston then moves back up the cylinder to eject the burnt fuel ready for another cycle.
活塞冻牢在汽缸里。
内燃机的活塞过热时会黏着于汽缸内。
In an overheated internal-combustion engine, the pistons may seize in the cylinders.
汽缸内，活塞及杆迅速走高推入一个较小的汽油和航空航天凡符合火花塞。
Inside the cylinder, a piston and rod quickly move up to push the gasoline and air into a smaller space where it meets the spark plug.
活塞冻牢在汽缸里。
石油必须能够吸收热量从高温的发动机零件，活塞，环，汽缸，并放开热时，它是泛。
The oil must be able to absorb heat from hot engine parts, pistons, rings, cylinders, and let go of the heat when it is in the pan.
这种踏板式水泵可以轻松用竹子获其他木头和两个带活塞的汽缸做成。
The treadle pump is easy to build from bamboo or other wood and two metal cylinders with pistons.
这普通活塞在方面汽缸类型。
该流体静力学活塞机构包括其中 可旋转地设置有汽缸鼓轮的壳体。
The hydrostatic piston engine comprises a housing in which a cylinder drum is arranged in a rotatable manner.
羽流可延伸到汽缸膛中对应于活塞位置的一段距离。
The plume may extend into the cylinder bore a distance corresponding to the piston position.
作为置换剂起头向下移动的活塞继续走高以及冷气体转移到汽缸热端以及循环再次起头。
As the displacer begins to move down the piston continues to move up and the cold gas is transferred to the hot end of the cylinder and the cycle starts again.
液压流体动力。液压缸。弹性体增能的塑料贴面密封件的活塞汽缸。尺寸和公差。
Hydraulic fluid power. cylinders. pistons housings for elastomer - energized, plastic - faced seals dimensions and tolerances.
最后步骤启动，这时蒸汽被导入汽缸从而驱使活塞像向前一样的向后，从而提高引擎的速度切断燃料的耗费。
The final step came when steam was introduced into the cylinder to drive the piston backward as well as forward thereby increasing the speed of the engine and cutting its fuel consumption.
他让把活塞从车床上卸下来装到汽缸上去。
He ordered the piston taken off the lathe and fitted to the cylinder.
活塞的上行通过排气门将废气排出汽缸外。
As the piston travels upward, it pushes the spent gases out through the open exhaust valve.
活塞的上行通过排气门将废气排出汽缸外。
As the piston travels upward, it pushes the spent gases out through the open exhaust valve.
应用推荐