计算结果用于热工水力设计、安全和力学分析。
The results have been applied to the thermo-hydraulic deigning , safety and mechanics analysis.
文章最后还给出了一个空间导叶的水力设计实例。
文章了阐述其工作原理、自吸机理及水力设计方法。
The paper expounds the working principle, self priming process and hydraulic design as well.
对低比转速离心泵叶轮的水力设计具有一定的指导意义。
Results of this thesis provide guiding significance to waterpower design of impeller of the low specific speed centrifugal pump.
此外，该设计方法也可用于轴流式水轮机转轮的水力设计。
Besides, it can be used for the hydraulic design of axial flow turbine runner.
对叶片式水力机械的水力设计模型进行了深入的对比研究。
This paper is concerned with a comparative study of the hydraulic design model for the blade type hydraulic machinery.
本文阐述了压板式短进水口优化水力设计的依据、目标和基本方法。
The basis, the objective and the methods of optimal hydraulic design for short inlet with pressing plate are described.
根据电站参数设计出性能优良的模型转轮是水轮机水力设计的关键。
Designing the satisfactory model runner according to the parameters of the power station is the key in hydraulic design.
混合堆芯的热工水力设计是一项关系到核安全和可靠生产的重要内容。
Mixed core compatibility is one of important issues affecting the nuclear safety and the reliable generation of a nuclear Power Plant.
论及了导叶及转轮的水力设计及其比较试验，阐述了这种机型的优秀特点。
Hydrolic design of runner and guide vane, the results for comparative test of runner and characteristics for this turbine are introduced.
大比降排水管水流通常为高速水流，其水力设计已经超过排水设计规范范畴。
In the sewer pipe with high energy slope, there always occurs the high velocity flow, and its hydraulic calculation is beyond the range of wastewater design specification.
从结构型式、水力设计、密封型式等方面论述了磷复肥料浆泵设计的有关问题。
Introduced are some problems concerning the design of compound phosphate fertilizer thick liquid pump in the light of its structure, hydraulic design, and sealing.
对于一个新型研究堆，在热工水力设计中有很多涉及研究堆安全的参数需要确定。
Many parameters related to reactor safety should be ensured in thermal-hydraulic design for a new type reactor.
混流式水轮机转轮前后的流场研究对于转轮水力设计，改善其性能有着重要意义。
The study on flow field in front and at back of a Francis turbine runner is very important for the runner in its hydraulic design and characteristic improvement.
如何研究灯泡贯流泵装置的水力性能及其优化水力设计，是需要首先解决的问题。
How to study hydraulic performance and optimum hydraulic design of a bulb tubular pump system, is a problem which need to be resolved first.
经现场应用及水力试验表明，本文提出的结构方案和水力设计方法是合理可行的。
The application in situ and hydraulic experiments show that the structure plan and design in this paper was available.
基于二元理论，用FORTRAN语言编程实现了高比转速混流泵叶轮的水力设计。
Based on the two-dimension theory, a computer code is made in FORTRAN language to design the high specific speed mixed-flow pump.
在逐点积分法一元理论叶片绘形的基础上，利用导叶水力设计程序设计了等环量叶片。
Based on point-by-point integration method and one dimension theory, designed the guide vane which has uniform velocity moment distribution with a hydraulic design computer code of the guide vane.
阐述了比转数为24的高温高压循环蜡泵的结构设计、水力设计及一些需注意的问题。
The structure design, hydraulic design, and some noticeable problems of the high temperature and high pressure circulating wax pumps with a 24 specific speed were described.
介绍了国内输油管线泵的概况，并提供了多级中开式输油泵的水力设计公式和性能曲线。
The general situation of domestic oil line pumps is presented, the hydraulic design formulas and performance curves of the multistage impeller pumps are given.
文章介绍一种用于从河底吸取泥砂并且有自吸排气的离心式多相流泵的结构及水力设计。
This paper introduces the structure and hydraulic design of the multiphase flow centrifugal pump, which draught sands from the riverbed and discharge the air of the suction pipe.
介绍了一种新的轴流泵叶轮的水力设计方法，推导了求解叶轮s 1流面流动的积分方程。
A new hydraulic design method and the numerical method of axial flow pump impeller are introduced. The integral equation for flow calculation of S1 stream surface of impeller is derived.
提出了把“理想流体”作为参照量，以粘性边界层作为水流动边界条件的粘性水力设计方法。
This paper, by referring to the "ideal liquid", proposed the viscous hydraulic design methods under the conditions of water-moving border of viscous layer of border.
提出了把“理想流体”作为参照量，把粘性边界层作为水流动边界条件的粘性水力设计方法。
This essay, by referring to the "ideal liquid" proposes the viscous hydraulic design methods under the conditions of water-moving border of viscous layer of border.
借鉴双流道叶轮水力设计中平面图的设计方法，提出了新的单流道叶轮平面图水力设计方法。
With reference to the design method of plan hydraulic design of double channel impeller, the new design method of plan hydraulic of single channel impeller is put forward.
蜗壳、固定导叶和活动导叶组成的引水、导水部件的水力设计对水轮机性能有着举足轻重的作用。
The hydraulic design of diversion components and guiding device which are composed by volute, stay vanes and guide vanes is very important to the performance of hydraulic turbine.
现有的两类一元理论离心泵叶轮水力设计方法存在试凑性工作量大或盖板形状不为简单曲线的缺陷。
The existing two kinds of 1-dimensional centrifugal pump impeller hydraulic design methods have short comes of either large calculation or complicated boundary lines.
本文基于上述状况，针对冲压焊接离心泵叶轮的水力设计、制造工艺和优化方法等方面进行了研究。
Based on the study conditions, we study the stamping and welding centrifugal pump of impeller design methods, optimization methods and manufacturing processes.
本文分析了无闸控制溢洪道的特点，讨论了溢洪道进口段水力设计中的几个主要问题和水力计算方法。
The characteristics of an ungated overflow spillway are investigated. Some important design aspect and hydraulic computation methods for the spillway entrance zone are discussed.
论述了石油化工用自吸离心管道泵的设计方法，给出了主要的水力设计与结构设计的计算公式与图表。
The design of self priming centrifugal pipeline pump is discussed, the primary hydraulics and structure design formulas and diagrams are offered.
应用推荐