氮化物一氧化氮也是温室气体的一种。
气体氮化过程控制系统的设计，提供了全自动的操作。
The gas nitriding process control systems are designed to provide a fully automatic operation.
介绍和讨论利用粗颗粒钛粉末净化普通氮气及其在钛表面气体氮化工艺中的应用。
This article introduces and discusses the purification of ordinary nitrogen by coarse titanium powder and its application in gas nitridation technology of titanium surface.
试图将蒸汽氧化和气体氮化结合在单一的热处理炉中的尝试并没有成功。
It is failed to combine together the two process of water vapor oxidation and gas nitriding in the same furnace.
本文在离子氮化装置及离子氮化工艺试验研究的基础上，根据气体放电理论，提出并讨论了双层辉光放电现象。
In this article, double layer glow discharge is discussed in terms of the theory of gas discharge and experiments on ion nitriding equipment and technology.
通过含铌与不含铌基体钢气体软氮化工艺对比实验，初步探索了合金元素铌对基体钢软氮化渗层组织与性能的影响。
This paper has investigated the influence of alloying element Nb on structure and properties of the soft nitriding layer by means of experiments of the matrix steels containing Nb and Nbfree.
球墨铸铁经过气体多元共渗后可在其表面形成氮化层，通过X射线衍射和扫描电镜对渗层的相结构与形貌进行分析。
The nitride layer was formed on the surface of ductile cast iron by gas multi-element penetration, and the phase structure and section appearance of nitride layer were analyzed by the XRD and SEM.
1961年，北京第二机床厂开始采用气体氮化淬火。
In 1961, the Beijing second machine tool plant began using gas nitriding quenching.
用气体软氮化强化农用柴油机球铁曲轴的研究始于1974年。
Since 1974 the research work on gas soft nitriding of nodular cast iron crankshafts used in agricultural diesel engine has started.
本文研究了脉冲磁场对气体氮化的氮化层深度、化合物层厚度、氮化层组织及其硬度的影响。
This paper deals with the influences of pulsed magnetic field on the depth, microstructure and hardness of the nitrided layer and the thickness of the compound layer.
结果表明：在较低压力沉积的氮化铝薄膜有良好的择优取向性；氮化铝薄膜残余应力为压应力，且随气体压力增加而逐渐变化。
Results show that AlN films deposited at low gas pressure have good selective orientation, and compressive residual shes increased with gas pressure is found in the films.
在包含含有氮气的混合气体b的气氛下，在总压为300气压以上、2000气压以下的压力下，生长氮化镓单晶。
Gallium nitride single crystal is grown in atmosphere composed of gases mixture 'B' containing nitrogen gas at a pressure of 300 atms or higher and 2000 atms or lower.
钠叠氮化物被选作燃料是有原因的，它是固体的，能够推进产生气体的发生率，并且在应用中非常稳定。
Sodium azide is the fuel of choice for a number of reasons. It is a solid propellant with a very high gas generation ratio. It is very stable in this application.
土壤及海洋中的细菌分解含氮化合物时，也天然地产生这种气体。
The gas is also produced naturally when bacteria in the soil and oceans break down nitrogen-containing compounds.
公司的渗氮工艺分为：气体软氮化、MGN和气体硬氮化。
The company's nitriding process is divided into:gas soft-nitriding, MGN and gas rigidity-nitriding.
氮化物同样会引起气候变化。氮氧化物(一氧化二氮)是一种比二氧化碳强300倍的温室气体。
Nitrogen also contributes to climate change. Nitrous oxide (N2O) is a greenhouse gas 300 times more potent than carbon dioxide.
所述腐蚀性气体通路可为异质衬底基座杆内形成的中空内腔，该中空内腔和氮化物生长反应腔通过异质衬底隔开。
The paths of the corrosive gas can be a hollow cavity formed in the foreign substrate base bar, the hollow cavity and the nitride reacting chamber are separated by the foreign substrates.
采用反应气体可以生产碳化物、氮化物纳米粉末。
When reaction gas is filled, nano carbide or nitride powder may be prepared.
一种新的少一些资本密集型的方式是利用商业可得的含水氨和木炭，它们是用替代燃料生物气体来减少氮化物。
A new less capital-intensive method utilizes commercially available aqueous ammonia and charcoal produced from co-firing biomass gases for NOx reduction applications.
如硫化氢硫化合物(高2s)和氮化合物(信息NH3,HCN的)生产者天然气是不可取，因为它们的凝析油的腐蚀性和exhuast气体污染物。
Sulphur compounds such as hydrogen sulphide (h 2 s) and nitrogen compounds (NH 3, HCN) in producer gas are undesirable as their condensates are corrosive and pollutants in exhuast gases.
如硫化氢硫化合物(高2s)和氮化合物(信息NH3,HCN的)生产者天然气是不可取，因为它们的凝析油的腐蚀性和exhuast气体污染物。
Sulphur compounds such as hydrogen sulphide (h 2 s) and nitrogen compounds (NH 3, HCN) in producer gas are undesirable as their condensates are corrosive and pollutants in exhuast gases.
应用推荐