对氧化炉结构进行改造，提高了机组的生产能力，取得了很好的效果。
The structure retrofit of the oxidation furnace in a concentrated nitric acid plant increased the production capacity of the plant and obtained a good result.
介绍为保证氧化炉长周期运行而设计的一套自动联锁保护装置的工作原理。
The article introduces the operation principle of an automatic interlock protection device designed for ensure long period running of oxidation furnace.
研究结果指出，接触法炭黑与氧化炉法炭黑的表面在碳氧键合结构形式及含量上有很大的差异；
The differences in structural type and contents of carbon-oxygen single bond between the contact black and the furnace black are very evident.
根据PAN基碳纤维生产的特点，设计了一种新型流态化预氧化炉，并对其关键部件的特点与作用以及流态化粒子的选择作了系统描述。
A new type of fluidized preoxidation furnace was designed in this paper based on characteristics of PAN base carbon fiber production process.
本文报道了以卤素钨灯为辐射源的快速热工艺(RTP)系统中的氮-硅直接热反应并和在常规电阻丝加热氧化炉中的氮-硅反应作了比较。
Direct nitrogen-silicon reaction in a tungsten-halogen RTP system has been observed and a comparison of N2-Si reaction using RTP system with the reaction using furnace system has been made.
曼彻斯特大学的一项研究计算了二氧化碳（造成气候变化的主要温室气体）在微波炉生产的每个阶段的排放量，从产品制造到废物处理。
A study by the University of Manchester calculated the emissions of CO2—the main greenhouse gas responsible for climate change—at every stage of microwaves, from manufacture to waste disposal.
原来是燃油炉出现了故障，它不仅向外冒出了滚滚浓烟，而且还释放出致命的一氧化碳。
The problem was a malfunctioning furnace that not only spewed smoke, but deadly carbon monoxide.
在与正常气化炉同样的工作温度下，使用二氧化碳能提高固体燃料至合成气的转化率。
Working at the same temperature as a normal gasifier, using CO2 means a better conversion of solid fuel into syngas.
将气化炉内30%的蒸汽气体替换成二氧化碳，就能确保所有的固体燃料转化成合成气。
Replacing 30% of the steam atmosphere of a gasifier with CO2 ensured that all the solid fuel was turned into syngas.
本文介绍了湖南铁合金厂从炉外法冶炼金属铬收尘灰中回收氧化铬、再制取金属铬的工艺及试验情况。
Process and tests on recovering chrome oxide in metal chrome dust by metallothermic reduction and then producing metal chrome in Hunan Ferroalloy Works are introduced.
根据能量平衡原理，建立了基于预热燃烧风富氧下铜精炼阳极炉高温烟气热损失数学模型，并根据富氧燃烧风对铜精炼阳极炉氧化期高温烟气热损失数学模型进行计算。
A mathematical model of heat loss of high temperature smoke vented from rotary anode furnace in copper refining based on warm-up burning air was established based on principle of energy balance.
超高功率电弧炉出钢口在使用过程中要经受钢液的冲刷、渣液的侵蚀、氧化和温度的剧烈变化。
The taphole of UHP-EAF should stand severe molten steel corrosion, slag erosion, oxidation and temperature change during operation.
试图将蒸汽氧化和气体氮化结合在单一的热处理炉中的尝试并没有成功。
It is failed to combine together the two process of water vapor oxidation and gas nitriding in the same furnace.
锡炉采用外置式加热装置，近距离的双波峰；柔性波峰喷口；低氧化量设计。
Tin stove adopts outer style heating device, close dual wave; flexible wave spout; low oxidation quantity design.
文章介绍了炉辊的轴向膨胀量、相对间隙、轴径实际温度及高温氧化减径量。
The paper introduces the axial inflation volume, relative space, temperature of axle neck and high temperature oxidized sizing reduction of rollers.
炉法炭黑表面臭氧化过程中主要生成的是表面碳氧单键结构，进一步氧化为双键的程度很低。
During the ozone oxidation process of furnace black, the carbon-oxygen single bond can be formed mainly, but further oxidation to the carbon-oxygen double bond is very difficult.
无氧化段由入口密封室，废气预热区，直接加热区，炉喉，废气排放系统组成。
The non-oxidizing zone is consisted of entry sealed room, waste gas preheating zone, direct heating zone, and furnace nozzle and flue gas exhausting system.
通过改造现有辉光离子氮化炉及工艺试验，扩大离子氮化的氮化范围，解决离子氮化后的氧化及变形问题。
By remaking now available glow ion nitrogen furnace and technological test, the range of ion nitrogen is enlarged, the questions of oxide and being out of shape are solved.
反射炉熔炼铝合金时，熔损与熔池几何尺寸、熔体氧化膜性质、熔炼工艺及操作等因素有关。
The melting loss has relations with size of melting bath, oxidation film property of melting charge, melting process and melting operation, etc, during melting aluminium alloy in reflecting frunace.
由于钢锭在炉时间短、钢锭减少氧化，因此实现了增产节能的目标。
Due to shorteningsoaking time and reducing oxidation of ingot, the aim for increasing production and energy-sa-ving has been realized.
针对热作模具钢的表面氧化处理，本文开发了一种带蒸汽预热装置的氧化处理炉，这种炉型现已应用于工业生产。
A furnace with preheating equipment for water vapor is developed for surface oxidation treatment of hot work dies. This type furnace is successfully used in industry.
易燃易爆有毒的煤气是煤气发生炉装置涉及的最主要的危险物质，主要成分为一氧化碳(CO)、氢气(H 2)、氮气。
Inflammable and explosive poisonous gas are gas occurrence boiler device of the primary risk involved in substance, the main composition is carbon monoxide (co), hydrogen (H2), nitrogen.
提取泡沫或罐式香槟法是在高压炉里的第二次发酵，能够使酒起泡沫，因为酵母产生了二氧化碳。
The taking of foam or Charmat Method is the second fermentation in autoclave that makes the wine sparkling, because of the carbon dioxide generated by the yeasts.
本文介绍了利用氨法处理杂质成分复杂的某大型冶炼厂炼铅系统烟化炉氧化锌烟灰制备高等级氧化锌的工艺。
The paper introduces the ammonia process of producing high-grade zinc oxide from impurities zinc oxide dust which produced by the smoked stoves in a large internal smelter.
硅氧化放热有利于铁水脱硫，这将部分抵消喷吹后炉缸氧势升高对脱硫的不利影响，结果生铁硫含量基本稳定。
It will counteract partially the harmful influence of oxygen potential elevation by the injection. As the result, the content of sulfur in hot metal basically remains stable.
由工业控制计算机实现的浸没熔炼过程控制系统能有效地控制炉内的氧化还原性气氛。
The control system for the sirosmelt furnace process which implemented by industrial control computer can control the atmosphere of oxidizing-reducing process in the furnace effectively.
重点介绍了辐射管加热无氧化辊底式炉和辊式淬火机的特点。
The characteristics of pipe radiator heating scale-free roller furnace and quenching machine were mainly introduced.
重点介绍了辐射管加热无氧化辊底式炉和辊式淬火机的特点。
The characteristics of pipe radiator heating scale-free roller furnace and quenching machine were mainly introduced.
应用推荐