气门杆间隙过大会加速气门的积炭。
摇臂向下移动的那一边推动气门杆以打开气门。
The downward-moving side of the rocker arm pushes on the valve stem to open the valve.
气门杆上的弹簧使气门保持在气门座上(关闭状态)。
A spring on the valve stem tends to hold the valve on its seat (closed).
气门过热增加气门杆的长度，使得气门不能正常磨合到位。
Overheating lengthens valve stems which prevents proper seating of valves.
气门过热或遭受重载（气门杆间隙过大或爆裂）均可造成气门破裂。
Valve Breakage. Any condition that causes the valve to overheat or to be subjected to heavy pounding (as from excessive tappet clearance or from detonation ) may cause valves to Break.
气门杆上的弹簧使气门保持在气门座上(关闭状态)。弹簧的下端抵在气缸盖上。
A spring on the valve stem tends to hold the valve on its seat (closed). The lower end of the spring rests against the cylinder head.
采用宏观断口分析、化学成分分析及金相检验等方法，对发动机排气门杆断裂原因进行了分析。
By means of macroscopic analysis, chemical composition analysis and microstructure examination, the cracking reason of engine exhaust valve stem has been studied.
M 1080无心磨床的自动切入磨削装置的设计与应用，保证了汽车发动机气门杆部加工精度。
This paper describes the design and application of automatic plunge grinding device for M1080 centerless grinders, assuring the process accuracy of engine valve stem.
包括气门顶开器、气门杆、活塞环、气缸壁在内的发动机元件受严格的生锈条件所影响，尤其在冬季停停走走驾驶档。
Engine components including valve lifters, valve stems, rings, cylinder wall, etc., are subjected to server rust-promoting conditions. Particularly in winter stop-and-go driving.
本发明涉及利用粉末冶金工艺制造钛基汽车发动机气门的方法。公开了汽车发动机气门杆、发动机气门以及二者的制造方法。
The invention relates to a method for making a titanium-based automotive engine valves using powder metallurgy process, and the automotive engine valve stem, engine valve and method of producing both.
柴油机横臂导杆折断会带来严重后果，经分析认为其折断原因有：同名气门杆顶部不齐；调整螺母松动，调整螺钉窜动；气门导管与气门杆间隙量大。
The reasons are: different top heights of valve rods having the same names; loose adjustment nuts or adjustment screws moving; and big clearances between valve guides and valve rods.
气门挺杆为一圆筒体，坐落在凸轮上。
一套气门开启机构包括一个气门挺杆和一个在凸轮轴上的凸轮。
The value-opening mechanism includes a valve lifter and a cam on a camshaft .
一套气门开启机构包括一个气门挺杆和一个在凸轮轴上的凸轮。
The value-opening mechanism includes a valve lifter and a CAM on a camshaft.
离合器弹簧、气门弹簧、减震器弹簧、汽车座椅扭力杆、其他各类汽车行业用高品质弹簧及关键部件。
Clutch spring, valve spring, spring for shock absorber, torsion bar for automotive seat, other kinds of high quality spring and key parts for automotive industry.
由于液压挺杆自动调节气门间隙为零间隙，同时可降低发动机噪声。
Because the hydraulic valve plunger automatic control valve clearance is zero gap, simultaneously may reduce the engine noise.
建立发动机气门振动的运动微分方程，该模型杆端作支承运动，考虑阻尼和较复杂的边界条件。
Considering damping and complicated boundary conditions for the valve support movement, the dynamic equation of the valve vibration of engine is found.
气门不过是装在阀杆上加工精细的金属塞而已。当气门就位时（向上移动阀口）时，即可将气门关闭。
The valves are nothing more than accurately machined metal plugs (on long stems) that close the openings when they are seated (have moved up into the openings).
我们公司主要生产机油泵、气门导管、气门挺杆、推杆等。
Our company mainly product oil pump, valve guide, valve Tappet, push rod and so on.
戴夫·托马斯：直升机有四个主要的控制器：脚踏板、总距操纵杆、周期变距操纵杆以及气门。
Dave Thomas: A helicopter has four main controls: foot pedals, collective pitch lever , cyclic, and throttle. The foot pedals control the tail rotor.
为了深入了解冷激合金铸铁气门挺杆的磨损规律，研究了冷激合金铸铁气门挺杆表层组织对耐磨性的影响。
In order to deeply comprehend the wear regularity of chilled alloy cast iron tappet, the influence of surface layer microstructure on wear resistance was studied.
这些材料通过在所述头和所述杆之间有可能不同的制造技术结合，其中至少气门的一部分通过动磁压制成形而制成。
These materials are combined with fabrication techniques that may vary between the head and the stem, where at least a part of the valve is made by dynamic magnetic compaction.
本文分析了气门挺杆端面气孔、裂纹形成原因。
The reason of the formation of gas porosities and cracks on the head face of valve tappet has been studied.
叙述了气门顶杆热挤压模失效形式。
The inaction ways of the hot extrusion die of the valve stem have been analyzed.
安装液压气门挺杆。
气门提杆为液压式，气门间隙不是手动调节。
Valve for the hydraulic rod to mention, the automatic adjustment of valve clearance.
当凸轮轴转动时，凸轮凸角转到气门挺杆下面，使挺杆上举，挺杆推动推杆。
As the camshaft turns, the CAM lobe comes around under the valve lifter. This raises the lifter, which in turn pushes upward on the push rod.
利用液压挺杆内部独特的结构设计，可自动调节配气机构传动间隙、传递凸轮升程变化、准时开闭气门。
Using hydraulic valve plunger interior unique structural design, but automatic control timing mechanism transmission gap, transmission lift of CAM change, punctual make and break tire valve.
利用液压挺杆内部独特的结构设计，可自动调节配气机构传动间隙、传递凸轮升程变化、准时开闭气门。
Using hydraulic valve plunger interior unique structural design, but automatic control timing mechanism transmission gap, transmission lift of CAM change, punctual make and break tire valve.
应用推荐