首先用三种方法预测和分析了实验房间的气流分布,然后进行了实验研究。
We firstly predicted and analyzed air distribution of test room with three different ways, and then made experimental study.
通过对火灾时烟气发生量及烟气流场的分析,建立了舞台空气幕计算的数学模型并求数值解。
Based on an analysis of the predicted volume and flow field of the smoke generated in case of fire, sets up a mathematical model and works out its numerical solution.
气流噪音是空压机的主要噪声源。从气流噪声的角度,可以简要分析如下。
Air compressor noise is the main noise source. From the Angle of air flow noise, can be briefly analyzes the following.
针对某型核心机地面台和高空台试验中空气流量测量不一致的问题,开展了核心机进口流场的数值计算分析和试验研究。
The flow field of the core engine inlet was numerically calculated to solve the problem that the air flow measured in the air simulated test facility was inconsistent with ground test.
对气流分级机的结构及工作原理进行了分析。
通过本课题的研究发现,使用数值模拟方法来分析和评价车厢内气流组织是可行的。
This research proves that it is feasible to analyze the air flow organization in the carriages of passenger trains using the numerical analysis method.
另外,也对宝源热电有限公司除尘器改造工程中的袋式除尘器的气流均匀性进行了介绍分析。
In addition, the airflow distribution of the alteration project of bag filter of baoyuan thermal power plant is also introduced and analyzed.
采用镜像法理想涡模型分析了地面效应对翼尖涡位置和气流下洗角的影响;
Image method ideal vortex model is used for the analysis of how ground effect impacts wingtip vortex and airflow downwash angle.
本文在传递窗内夹层四周位置设置格栅,通过实验和CFD模拟对传递窗进行气流组织分析和优化,并得出了满足生物安全的传递窗方案。
In this paper, Test and CFD simulation was used to analysis and optimize the air distribution of transfer window, and concluded the program to meet the bio-security.
根据计算结果描述了喷嘴中气流流动特征,重点分析了参数对气流流动特征以及成纱性能的影响。
The analysis focus on the effects of parameters on air flow characters inside the nozzle and the yarn properties.
本文根据壁龛射流的边界条件,进行射流与通风气流之间运动和力的作用关系分析,建立了壁龛射流的增压关系式。
Based on the boundary condition of jet flow in a niche and the interaction of jet with air current, a pressurization relation equation have been established.
本文分析了气流干燥中物料粘壁、袋式除尘器堵塞等原因,提出了克服上述问题的措施。
This paper analysis the reasons of sticking material on the pipe wall and chocking up the bag dust remover in the air drying and puts forward the measures about overcoming aforesaid problems.
运用FLUENT软件对气流和岩体间的耦合传热+进行了模拟分析,给出了气流和岩体的温度场分布;分析了坝体廊道对气流的冷却效果。
Numerically simulates the coupled heat transfer between airflow and rock with FLUENT software, predicts their temperature fields, and analyses the cooling effect of the corridor on airflow.
并对计算结果进行分析,总结出送风参数对空调房间的气流流动与温度分布的影响规律。
The calculation results show the characteristics of temperature distribution and fluid flow inside the air-conditioned room with variors air inlet parameters.
该文以探讨高效的过滤途径为目的,通过数值模拟的方法,分析了不同的气流速度和不同的通道形状对陶瓷过滤器除尘效率的影响。
Aiming at the high filtration efficiency approaches, the paper analyzed the effect of gas velocity and shape of channel on filter efficiency by numerical simulation.
分析了火灾发生后的烟气流动规律及温度场和气流场的分布,并与实体燃烧试验的结果进行了对比。
Analyses the temperature and air flow distribution and smoke flow regularity, and compares the simulation results with the results of combustion experiments.
计算结果表明,在空调净化房间通过测量分析气流的运动规律来研究气流中微小粒子的扩散规律是可行的。
Calculating results show that it is available to study the tiny particle diffusion by means of measuring and analyzing the room airflow movement in an air conditioning and cleaning room.
基于实验研究,分析讨论了含尘气流温度对无电晕式静电除尘器除尘性能的影响。
Based on the experimental investigations, the influence of flue gas temperature on the precipitation properties of electrostatic precipitator was analyzed and discussed.
本文主要进行可变式进气歧管的三维曲面重建和空气流动模拟分析的研究。
This thesis mainly carries on research of three dimensional surface reconstruction of variable intake manifold and air fluid simulation analysis.
在此基础上进行了喷枪内外燃气流场分析,结果表明,燃气温度分布、速度分布与实际焰流有较好的一致性。
The combustion gas flow was analyzed, the velocity and temperature distributions were calculated according to this model, the results fitted well with the actual flame.
精确程度取决于质量平衡数据的质量、量表的校验、燃料气分析以及空气流量表的精度。
The limit of accuracy is based upon the quality of the mass balance data, meter calibrations, flue gas analysis, and air flow meter accuracy.
分析了流化床、气流床和移动床煤气化工艺优缺点和煤气化工艺的发展趋势。
The advantages and disadvantages of fluidized bed, entrained flow bed and moving bed coal gasification technology and their current trends were analyzed.
程序运行表明,计算结果满足该系统对天然气流动状态及计量误差分析的要求。
The result of program operation shows the calculating result satisfies the requirements of natural gas flow state and measurement error analysis to the system.
文章分析了空气流经倾斜“A”型直接空冷凝汽器时,凝汽器各部分阻力产生的原因。
The reason of condenser component drag is analyzed when air flows through tilted A-shaped direct air-cooled condenser.
第二部分用STAR - CD流体软件对可变式进气歧管进行空气流动数值模拟分析。
The second part carries on the air fluid simulation analysis of variable intake manifold with the STAR-CD fluid software.
研究设有吹拔空间的高层建筑烟气流动及火灾蔓延特征,分析其对防火分区和安全疏散的影响。
Characteristics of smoke flow and fire spread in a patio space of a high-rise building were studied to investigate their influences on fire compartment and safety evacuation.
本文分析了流化床气流粉碎分级系统中的压力参数对流化床粉碎与涡轮分级机性能的影响。
The effects of pressure parameters in the system of fluid bed grinding and turbine classification on the properties of the fluid bed grinder and turbine classifier were analyzed.
本文所建立的方法也为火箭发动机排气流场分析提供了一个更为可信的参考依据。
Our method provides a more convincing consul - ting basis for analysing the exhausting flow field of rocket engines.
利用类似方法对负压救护车的内部气流组织状况进行了模拟分析。
The simulation of the air distribution in theisolation ambulance was carried on by the similar way.
利用类似方法对负压救护车的内部气流组织状况进行了模拟分析。
The simulation of the air distribution in theisolation ambulance was carried on by the similar way.
应用推荐