该流量计可用于其它气体质量流量的测量。
The mass flowmeter is also suitable for applications in other gases.
热式气体质量流量传感器就是其中的一类。
应用热式质量流量计直接测量气体质量流量。
Applying thermal mass flowmeter to measure gas mass flow directly.
极低的挥发性,不仅降低运行油耗,还极大的提高了气体质量。
Very low volatile, not only to reduce running fuel consumption, but also greatly improves the quality of the gas.
提升管出口处的气体质量分数随着试件浸没深度的增大而减小。
The vapor mass fraction at the outlet of the elevating tube increases with the decrease of the driving liquid head.
介绍恩德粉煤气化工艺使用的煤质对气化过程和气体质量的影响。
A description is given of the effect of the coal quality used in the Ende pulverized coal gasification process on gasification and gas quality.
本公司与林德集团大连分公司的战略合作,将更好的保证气体质量。
The Company a strategic co-operation with the Linde Group, Dalian Branch, will better ensure the quality of gas.
用铂膜电阻作为感温元件,研制了气体质量流量计,并给出试验结果。
With Pt film resistor used as the temperature sensors, a mass flowmeter for gases is developed and the test result is also given.
粒子尺寸过大引起的燃料减少,反应性,导致启动问题的气体质量差。
Excessively large sizes of particles give rise to reduced reactivity of fuel, causing start-up problem and poor gas quality.
介绍了气体质量流量计的特点,并对其工作原理和安装也作了详细的阐述。
The characteristic of gas mass flow meter is introduced. The flow sensing principle and the installation of this flow meter are also described.
对某轿车的侧面安全气囊泄气面积、气体质量流量、几何尺寸等参数进行了优化设计。
The leakage area, inflator gas flow rate and dimension of side airbag on a passenger car were optimized.
并应用音速喷咀对涡轮流量计、腰轮流量计和密度补偿式孔板气体质量流量计进行标定。
The sonic nozzle is used to calibrate turbine flowmeters, Roots flowmeters, and density compensated orifice gas mass flowmeters.
排气阀门的关闭直接造成参与气泡振荡的气体质量的减少,第二气泡脉冲相对主脉冲明显减小。
When the exhaust valve is closed, the gas with the bubble oscillation reduces, causing the bubble impulse lower the pressure impulse obviously.
所述的掺杂气体控制部分包气体保护部分使用的氩气、氮气的气体质量流量计及掺杂箱部分;
Said doping gas control part includes a gas quality flowmeter (of argon and azote) used by a gas protect part, and a doping case part.
介绍了一种利用检测漩涡频率和横向变动升力的方法测量气体质量流量的漩涡式气体质量流量计。
The paper introduces a new kind of vortex gas mass flowmeter, which can measure gas mass flow by testing the vortex frequency and the horizontal varying lifting force.
本课题采用MEMS工艺制作热膜式气体质量流量传感器,主要工作放在敏感头芯片部分的研制。
This task adopt MEMS technics to make Thermal -film air-mass sensor, mostly work is the study and facture of the sense organ of the chip.
本文介绍气体质量流量控制器的工作原理和在岩心渗透率测试中的应用,以及影响其测试性能的几个因素。
This paper introduce gas Mass Flow Controller principle of operating application for core permeability detection and some factors that influence its test performance.
为提高常规气电焊工艺水平,进行了保护气体质量及配比对焊缝质量影响规律的研究及气电焊辅具的研制。
In order to improve conventional GMAW process the effect of shielding gas quality and mixed ratio of different gases on welding quality are studied and useful fixtures are developed.
它也认识到,体积密度的气体质量相当大的影响,因为它影响在火灾中燃料的停留时间,燃油流速和气体流量。
It is also recognised that bulk density has considerable impact on gas quality, as it influences the fuel residence time in the fire box, fuel velocity and gas flow rate.
模型涉及的方程包括:颗粒荷电方程、电场与电荷守恒方程、气体质量与动量守恒方程、颗粒质量与动量方程等。
The model involved in particle charging equation, electric field and charge conservation equation, gas conservation equations of mass and momentum, particle mass and momentum equation.
通过对水平管束管间冷凝换热特性的试验研究 ,探讨并分析了冷却水流量以及不凝气体质量分数对管束冷凝换热的影响规律和机理 。
The Effects of the content of the non-condensable gas and the condensing pressure on the overall condensation heat transfer was tested.
该模型考虑了气、液膜之间的质量连续及能量连续特征。 对于不同的壁面过冷度,用数值方法首次求解并分析了边界层内局部不凝气体质量分数、温度和速度的分布规律。
The vapor liquid two boundary layer model is applied to predict local mass concentration of the non condensable gas, temperature profiles and velocity profiles in the boundary layer.
三轴导管允许气体从进入口排出,进入到用户设备,然后改善供应的液体质量。
The triaxial plumbing allows gas to be vented from the point of entry into the user device, further improving delivered liquid quality.
模拟结果表明,该浇注系统填充过程平稳,温度场分布均匀,所得压铸件气体夹杂和冷隔缺陷少,整体质量较高。
Simulation results show a smooth filling, uniform temperature distribution and few flaws such as gas inclusion and cold shut. A casting with a good quality was obtained.
近一、二十年来,SF_6气体在高压电器领域得到了广泛应用,从而大大提高了这些设备的技术性能和整体质量。
In recent 10-20 years, SF6 gas has been widely applied in the field of HV electrical apparatus, thus the technical performance and entire quality of these equipment are greatly raised.
模拟结果表明,该浇注系统填充过程平稳,温度场分布均匀,所得压铸件气体夹杂和冷隔缺陷少,整体质量较高。
Simulated results show that obtained parts has few defects, such as inclusion and cold shut due to smooth mold filling and uniform distribution of temperature field.
模拟结果表明,该浇注系统填充过程平稳,温度场分布均匀,所得压铸件气体夹杂和冷隔缺陷少,整体质量较高。
Simulated results show that obtained parts has few defects, such as inclusion and cold shut due to smooth mold filling and uniform distribution of temperature field.
应用推荐