分析了强化烘干过程热平衡关系机理，研究物料比表面积与烘干效率的关系。
It analyses the heat balance mechanism of aggrandizement drying process and study the relationship between the surface area of substances and the efficiency of drying.
纳米材料具有大的比表面积，拥有优良的吸附性能，因此在环境分析领域的应用逐渐增多。
Nanomaterials have good adsorbability because of their huge specific surface area, therefore in the foreground of environmental analysis.
元素分析、氮气物理吸附和X射线衍射分别考察了裂解炭的元素组成、BET比表面积以及微晶结构变化；
Elemental composition and BET surface area of pyrolysis carbon were investigated. X-ray diffraction pattern and constant-current charge-discharge properties of pyrolysis carbon were studied.
试验采用比表面积分析仪、环境扫描电子显微镜、快速水分测定仪分别对纤维涂层形貌以及渗水特性进行表征。
The appearance and Water-releasing Characteristics were described by BET surface area measurement, the environment scanning electron microscope and fast water equipment.
本文概述了比表面积测试仪和热分析仪在软磁铁氧体生产质量控制中的应用。
This paper comprehensively reviews the application of specific surface area analyzers and thermal analyzers in the quality control of soft ferrite materials.
实验样品采用X射线衍射分析、比表面和孔径分析及热分析三种表征手段进行表征。
Three characterization methods of the lab samples were as followings: X-ray analysis, specific surface area and pore analysis, and thermal analysis.
汽爆麦草纤维表面特征的XPS分析结果也说明汽馒处理使纤维比表面积增加，余水性基团更多。
XPS results also demonstrated that the steam explosion could lead to the increase in the special surface area and the hydrophilic groups of the fiber.
应用表面改性剂进行了氢氧化铝表面改性研究，采用了比表面积测定、红外光谱分析等测试方法对改性效果进行评价，确定了最佳改性条件。
The surface modification results were analysed by the methods of the specific surface area measurement and infra red absorption spectroscopy, and the best conditions for modification were obtained.
从孔隙的大小分布、比表面和分形行为等三个方面进行分析。
By analysing the distribution of diameters of the pores, specific surfaces and fractal behaviors in samples, the characters and mechanisms of pores growing are discussed.
根据正交试验，通过收率、比表面积及透射电镜表征分析得到了最佳纯化条件，以保证产品质量，降低制备成本。
Choice the best condition though the orthogonal experiments and analyzed of purification rate, BET data and TEM image. The quality was ensured and the cost of production was decreased.
用原子力显微镜（AFM），扫描电子显微镜（SEM），X 射线粉末衍射仪（XRD），BET 比表面积分析仪对其结构进行了表征。
The structures of RDX/RF aerogel were characterized by atomic force microscopy(AFM), scanning electron microscopy(SEM), X-ray powder diffraction(XRD), and BET method.
通过激光粒度仪、比表面测定仪、XRD、TEM和TG-DTA对样品粒度、比表面、晶型、形貌、失重情况等进行分析表征。
The products have been characterized using laser scattered particle analyzer, specific surface areas measuring and testing instruments, XRD, TEM and TG-DTA.
XPS分析表明聚苯胺微管具有比其本体试样更高的掺杂度，这是由于聚苯胺微管极大的比表面积有利于掺杂及模板孔壁阻碍了掺杂剂挥发；
XPS shows that the doping degree of PANI microtubes is higher than that of PANI bulk sample, due to huge surface area of PANI microtubes.
用原子吸收、碘价分析、BET比表面测定、XRD和IR等手段对上述催化剂以及进口催化剂进行了物理和化学表征。
Physical and chemical characterization of the catalysts as well as some import catalysts also was carried out by means of atomic spectra, activity and BET surface area measurement, XRD and IR etc.
采用高能机械球磨法制备了金属铁、钨微粉，分析了铁、钨粉末产品的粒度分布特性、比表面积变化情况及颗粒形貌。
The powder of iron and tungsten are prepared by using high energy mechanical ball mill. The size distribution, specific surface area and grain shape of iron and tungsten powder are analysised.
用原子吸收、碘价分析、活性和BET比表面积测定及XRD、TG -DTA、IR等手段，对催化剂和产物进行了物理和化学表征。
Physical and chemical properties of the catalysts were studied using activity measurement, BET surface area measurement, XRD, TG DTA and IR spectra etc.
分析了比表面积、平均孔径、孔隙率等孔隙特性参数对扩散的影响，获得了分形多孔介质中气体扩散系数与平均孔径的函数关系。
The effect of pore characteristics on gas diffusion was analyzed. The relationships between the specific area, average pore diameter and porosity with the diffusion coefficient were obtained.
通过正交实验得出最佳反应条件，制得的超细氧化锌粉料经组分分析、结构分析表明，其粒径、纯度、比表面积和晶型均符合相关标准。
The powders were tested by chemical composition analysis and construction analysis. The size of the powder, the purity and the specific area were all better than those of standard.
讨论了以河道底泥和生活污泥为原料烧制的陶粒比表面的测定原理、方法和结果，并对生活污泥添加量、粘结剂添加量和烧结温度对陶粒比表面的影响作了进一步分析。
Affects of sewage sludge, adherent amount added to the material and temperature of agglomeration to the specific surface area of ceramisite made of river sediment are also analyzed.
BET分析表明，溶液合成法具有比焙烧法更大的比表面积；
BET test results showed that BET Surface area of product synthesized by aqueous solution oxidation method were larger than that of roasting method.
采用SEM、XRD、EDS和全自动比表面和孔隙度分析仪对样品的形貌、物相、含量和比表面、孔结构进行表征。
The morphology, phase, content and special surface area, and pore structure of the samples were characterized using SEM, XRD, EDS and automated surface area and pore size analyzer respectively.
采用SEM、XRD、EDS和全自动比表面和孔隙度分析仪对样品的形貌、物相、含量和比表面、孔结构进行表征。
The morphology, phase, content and special surface area, and pore structure of the samples were characterized using SEM, XRD, EDS and automated surface area and pore size analyzer respectively.
应用推荐