本文描述步进电机微步控制的设计方法及驱动电路。
The design method and driving circuit for microstepping control of step motor are described in the paper.
介绍一种机械手关节运动的PC机控制方法，它包括步进电机的驱动、硬件接口电路的设计、软件的编程方法。
This paper introduces PC control approach of joint motion of manipulator. This approach includes driving of stepping motor, interface design of hardware circuit and software programming.
在此基础上对步进电机细分驱动电路作了简单的介绍。
On this base, introducing the stepper motor subdivided drive circuit simply.
提出采用斩波式电流型开关电源结合单片式步进电机驱动器TA8435H，构成一种电机驱动电路的方案。
A method of stepping motor driver circuit was given, composed by a chopper type current mode switch regulator and a monolithic stepping motor driver TA8435H.
详细介绍霍尔速度传感器，里程计数脉冲的产生，步进电机的驱动和BL 2115集成电路在电子式车速里程表中的应用。
The Hall speed transducer, the generation of the mileage pulse, the driving of step motor and the application of integrated circuit of BL2115 in speedometer are introduced in detail.
作者介绍了PMM 8713与SI- 7300的功能，给出了由它们组成的功率驱动电路及其在步进电机上的应用方法。
The functions of PMM8713 and SI-7300 are introduced, providing a power driving the circuit and an application method to step motors.
本文论述了检测机器人的步进电机驱动电路、视觉系统中的固态摄象机和字符叠加器，还介绍了接近觉传感器的应用。
This paper discusses step mo- tor driven circuit of inspecting robot, Solid state camera and character inserter in visual system. Application of proximal sensor also is introduced.
驱动电路采用恒流斩波方式，提高了步进电机的运转扭矩和工作效率。
The driving circuits adopt constant current chopping for the purpose of improving rotating torque and increasing working efficiency of the stepper motor.
本文提出了一种新型的“移相式”微步驱动电路，该电路向步进电动机提供一个模拟电源。
A new "phase shift type" vernier drive circuit which provides the analog power for step motors is presented in this paper.
双回转机构的步进电机控制电路由TDA1521音频集成功率放大器组成平衡桥式功率驱动电路，由计算机并行口经过锁存器构成脉冲分配器。
To control stepping motors, the balance bridge power drive circuit is made up by TDA1521 integrated audio power amplifier, the pulse allotter is made up by the parallel ports of computer and latches.
介绍HH204步进电机驱动电路在复费率计度器上的应用，给出了硬件电路和驱动程序。
This paper introduces the application of HH204 stepping motor's driver on multi-rate register, presents a circuit and driver program.
L 297芯片产生脉宽可调的脉冲相序信号，该信号作为双极性桥式功率驱动电路的输入信号，放大后驱动步进电机。
L297 chip generates pulse phase sequence signals of which the pulse width is adjustable. The signals are the input ones of dual bridge driving circuit and drive the stepper motor after amplification.
本文介绍三相混合式步进电动机的驱动控制电路。
This paper introduces the controlling and drive circuits of three phase hybrid stepping motor.
基于ARM嵌入式控制器，提出了供纸系统中直流电动机和步进电动机驱动电路设计方案。
Based on the embedded system of ARM, the design scheme of DC motor and stepper motors driving circuits is proposed.
经过设计的驱动电路分别对4个步进电机进行控制。
This update makes the device of driving stepper motor control one stepper motor by 4 way .
本文设计了一种新型的步进电机细分驱动电路。
A new type of stepper motor subdivision drive circuit was designed in this paper.
通过ATMEL89C 51单片机对步进电机进行控制，主要介绍了步进电机控制器、驱动电路和LED显示电路的设计，实现了步进电机的开环控制。
The design using ATMEL89C51 single chip to control the step-motor with its controller, driving circuit and LED display circuit to realize step motor open-loop control were introduced.
一种平板显示器的驱动电路，它适用于由简易步进电机组成的平板显示器。
The driving circuit is suitable for plate display device driven via simple stepped motor.
介绍了ULN2003的特点与电路结构，采用单片机连接uln2003组成的驱动系统来驱动步进电机。
The paper describes the characteristics and circuit of ULN2003, and designs the system of motor drive using the microcomputer combined with the ULN2003 to drive the stepper motor.
采用集成芯片L 297和L298来驱动步进电机，并设计了驱动电路。
The step motor driver circuit are build by using chip L297 and L298 and it is controlled by Single chip Microcomputer.
建立了包括电流控制电路、功率驱动电路以及五相混合式步进电动机在内的恒频斩波恒总流驱动系统的完整的数学模型；
Mathematical model of the system, included the current control circuit, power driving circuit and five-phase hybrid stepping motor is established.
设计了步进电机驱动应用电路和单片机控制电路，并编写单片机程序，完成与上位机通信。
Designed stepper motor driver application circuit and Single Chip Microcomputer control circuit, and compiled the SCM procedures, finished to communicate with the upper computer.
为此，提出了功率步进电动机的新的驱动方法——脉冲调整法，并提供了晶体管电路和初步实验结果。
A new control method, the pulse-regulation method, is proposed and a transistor circuit is designed. Some preliminary experimental results are thereby given.
该控制系统包括上位机控制界面、单片机控制电路、驱动器以及步进电机。
The system includes the upper computer software, the MCU circuit, the driver and the step motor.
该系统包括单片机系统电路、寻迹检测电路、平衡检测电路、步进电机驱动电路、数码显示电路等。
The control system consists of AT89S52 single chip computer system, autonomous tracing circuit, balance detection circuit, driving circuit of stepping motor and LED display circuit.
该系统以PHILIPS公司LPC2132芯片为核心，集成温度、压力、频率和振幅模拟放大电路，步进电机驱动单元。
This system took LPC2132 chip of PHILIPS as its main processor, including temperature pressure frequency and swing analog circuit and step motor driving module.
该驱动电路主要应用双极性两相混合式步进电机驱动集成芯片L 6217a，来实现电流细分功能。
The bipolar two-phase hybrid stepping motor integrated with chip L6217A was mainly used in this drive circuit to realize the ability of current subdivision.
设计五相十拍步进电动机驱动电路时选择了89c 2051作为环形分配器，而功率器件选用电压型的VMOS管。
When designing the step motor drive circuit of 5 phase 10 pat, 89c2051 is adopted as the Loop allotter. The VMOS is adopted in power elements. It is designed as chopper-type constant current circuit.
从一个数控系统的研制过程，阐述了步进电机细分驱动电路和光栅尺细分检测方法的改进。
Through a process of numerical control system, describes the improvement of driver for step motor and the measure way with gratingruler.
从一个数控系统的研制过程，阐述了步进电机细分驱动电路和光栅尺细分检测方法的改进。
Through a process of numerical control system, describes the improvement of driver for step motor and the measure way with gratingruler.
应用推荐