本文是介绍步进电机驱动器的设计方法。
缠绕大多数步进电机驱动器的确认增加电机的兼容性。
Winding confirmations increase motor compatibility with most step motor drives.
介绍了一种采用专用芯片L6506的步进电机驱动器设计。
This paper introduced the design of one stepper motor driver using dedicated chip L6506.
本文叙述基于单片机8031最小应用系统的步进电机驱动器。
The paper describes that a step motor driver based on single-chip computer 8031 minimum application system.
硬件由微机、步进电机控制卡、步进电机驱动器和步进电机等器件组成。
Hardware consists of microcomputer, stepping motor control card, stepping motor driver and stepping motor and so on.
介绍一种利用C8051F020单片机为控制核心的步进电机驱动器。
This paper introduces a kind of stepper motor driver with the key of MCU C8051F020.
其中具体包括步进电机驱动器驱动步进电机，并设计一种直线运动机构。
Which include stepping motor-driven stepper motor drive and linear motion of a body design.
该系统由可编程序控制器、步进电机驱动器、步进电机、触摸屏等构成。
The system consists of PLC, stepper motor driver, stepper motor, HMI, and so on.
下位机控制系统由at89c 2051单片机、步进电机驱动器等组成。
The control system (including AT89C51 SCM board) and the joint control-drive system (including AT89C2051 SCM, stepping motor drivers) of Robot are designed.
提出采用斩波式电流型开关电源结合单片式步进电机驱动器TA8435H，构成一种电机驱动电路的方案。
A method of stepping motor driver circuit was given, composed by a chopper type current mode switch regulator and a monolithic stepping motor driver TA8435H.
该系统由转向电子控制单元(ecu)、全液压转向器、步进电机、步进电机驱动器、角位移传感器等组成。
This system consists of steering electronic control unit (ECU), all hydraulic steering, stepping motor, stepping motor driver and angular displacement sensor, etc.
由于对步进电机驱动器的控制方式做了一点改进，较好地解决了步进电机在真空条件下工作温升太快的问题。
Improving the controlling mode for the driving force of the stepping motor the problem that the temperature of the motor raise too fast in the vacuum condition is solved satisfyingly.
由于对步进电机驱动器的控制方式做了一点改进，较好地解决了步进电机在真空条件下工作温升太快的问题。
Improving the controlling mode for the driving force of the stepping motor the problem that the temperature of the motor raise too fast in the vacuum condition is solved...
由于对步进电机驱动器的控制方式做了一点改进，较好地解决了步进电机在真空条件下工作温升太快的问题。
Improving the controlling mode for the driving force of the stepping motor the problem that the temperature of the motor raise too fast in the vacuum condition is solved satis...
本公司从1992年至今，始终致力于步进电机驱动器和伺服驱动器的研发、生产，拥有雄厚的技术实力和广泛的客户基础。
Our company has always committed to research, development, and manufacturing of the step drivers and the servo drivers since 1992. We possess powerful technical strength and extensive customer base.
单片机对步进电机的控制有串行控制和并行控制两种方式。本设计采用的是串行控制方式，此方式下单片机控制系统与步进电机驱动器之间只有两条控制线。
The design adopts serial control mode, in this case there are only two controlling lines between the single chip microcomputer system and the driver of the step motor.
本文应用单片机、步进电机驱动芯片、字符型LCD和键盘阵列，构建了集步进电机控制器和驱动器为一体的步进电机控制系统。
In this paper, microcontroller, stepper motor driver chips, character LCD and keypad array, build a set of stepper motor controller and driver as one of the stepping motor control system.
精通PLC编程（西门子、三菱），人机接口触摸屏、变频器、伺服驱动器、步进电机。
Proficient in PLC programming (Siemens), human-machine interface touch screen, frequency converter, servo driver, stepper motor.
高细分步进电机采用高细分驱动器，噪音低、精度高、运行平稳。
High-subdivision stepper motor driver, low noise, high running precision, and movement smoothly.
介绍了一种新型步进电机控制驱动器。
This article introduces a new kind of stepping motor control driver.
介绍了一种基于CPLD实现五相步进电机的驱动器的设计方案，可实现全步、半步控制。
A new design of five phase step motor driver based on CPLD is introduced. The driver can implement the full step and the half step control.
为解决以上不利因素，研究设计了一套步进电机细分驱动器来控制步进电机，用以改善步进电机运行性能和量化显示切割速度。
To settle the above problems, the research introduce a suite of subdividing driver to control step motor, the aim is to improve step motor running capability and quantify cutting velocity.
定位系统的伺服组件由转换器、主控器、驱动器及步进电机构成。
The servo components of the locating system are composed of current adapter, generate masters, step drivers, and stepper motors.
步进电机的驱动器采用细分可以提高步进电机的进给分辨率，从而提高调整支架的角度分辨率。
The subdivision of step motor drive can enhance the resolution of motor so as the resolution of electrically driven displacement used for optical regulation si improved.
在对步进电机细分驱动原理进行分析研究的基础上，提出一种基于FPGA控制的步进电机细分驱动器。
In this paper, a divided driving circuit for stepping motor controlled by FPGA is put forward, based on the analysis of the principle of stepping motor divided driving.
数控系统硬件设计中完成了步进电机及驱动器、运动控制卡的选定。
CNC system hardware design and the completion of the step motor drives, motion control card selection.
步进电机采用高细分驱动器，精度高、运行平稳。
Step motor adopts high sub-division driver with high precision and stable operation.
该控制系统包括上位机控制界面、单片机控制电路、驱动器以及步进电机。
The system includes the upper computer software, the MCU circuit, the driver and the step motor.
该控制系统包括上位机控制界面、单片机控制电路、驱动器以及步进电机。
The system includes the upper computer software, the MCU circuit, the driver and the step motor.
应用推荐