考察了模拟次数对计算结果的影响。
The effect of the number of simulation on results is investigated.
结果提取次数对考察指标具有显著性影响。
Results The extraction times has significant effect on the indexes.
采集次数对野生壁蜂采集效果的影响也很大。
研究了随机载荷作用次数对齿轮可靠性的影响。
The effect of frequency of loading actions on the reliability of a gear is studied.
研究返回次数对模具锌合金组织、力学性能的影响。
The effect of different recycling times on the microstructure and mechanical properties of zinc alloy for die was studied.
同时研究了非线性次数对系统的有效电导产生的影响。
Meanwhile, we discuss the influence resulting from the nonlinear exponent.
研究了热循环温度和循环次数对多元合金铁基堆焊层硬度的影响。
The effect of heating temperature and thermal-cold recycle times on the hardness of mult-elemental Fe-based hardfacing layer was studied.
同时还研究了迎角节点间隔和样条函数的次数对估计结果的影响。
The influence of nodal points interval of angle of attack and order of spline function on estimation results is also researched.
目的：探讨烧结次数对金铂合金烤瓷及镍铬合金烤瓷颜色的影响。
Objective: To investigate the effect of firing number on the color of Au-Pt alloy porcelain and Ni-Cr alloy porcelain.
考察了温度、湿度、提拉速度、提拉次数对膜厚、膜层有序性的影响。
The factors of temperature and humidity influenced on film thickness and order of layer were studied, in which pulling speed and pulling times were also included.
探讨了浸提倍数、稀释倍数、浸提次数对饲用木聚糖酶活性测定结果的影响。
The influence of soak multiple, dilution multiple and soaking times on the activity of a xylanase was studied.
讨论了原料配比、酯化时间、催化剂用量及其重复使用次数对酯化率的影响。
The effect of raw material ratio, esterification time, the quantity of the catalyst and reuse of catalyst on esterification rate was discussed.
第5章运用管理统计学的方法计算汽车维修服务中返修次数对顾客满意度的影响。
Chapter 5 Management of the use of statistical methods for vehicle maintenance services, the number of repair a second time effects.
实验得出结论：不同的直投发酵剂在不同的传代次数对酸奶的品质有不同的影响。
The conclusions were achieved that the different culture time of the different direct VAT inoculation had different effect on quality of yoghurt.
实验结果还表明，涂炭次数对膜的透气分离性能影响不大，建议涂炭1 ~3次。
The results show that optimal number of coated carbon is from 1 to 3 because it has influence slightly on permeation and separation of the composite membrane.
结果提取次数对各指标都有显著影响，优选出最佳的提取工艺，醇沉浓度为70%。
RESULT the number of times of extraction is directly related to the various indexes. The optimal technique was determined with an alcohol sediment concentration of 70%.
对浸提温度、时间、加水量及浸提次数对大麦茶饮料浸出效果的影响进行了正交实验。
The orthogonal experiment was made for effects of extracting temperature, time, water volume and number of extraction on the results of extracted barley tea.
通过所建二维细观损伤模型分析了真空热循环次数对材料线膨胀系数曲线影响的原因。
The effect of vacuum thermal cycles on the linear expansion coefficient profile was analyzed using a proposed two-dimensional model of micro-damage.
研究了微波功率、浸提时间、乙醇浓度、料液比、浸提次数对速溶茶得率和品质的影响。
Specific researches are made to find the influence of microwave power, extraction time, alcohol thickness, rate of material and solution and extraction times on obtainment percentage and quality.
返回次数对K446合金高温断裂特征和高温拉伸性能没有明显影响，但降低持久性能。
The recycle times has little effect on the fracture mechanism and tensile properties at high temperature, but reduces slightly the stress-rupture life of revert K446 alloys.
通过对试验数据的整理，分析了冻融循环次数对四个强度等级混凝土的强度和变形的影响。
According to data collected in experiments, freeze-thaw effect on strength and deformation of four different strength grade concretes were analyzed.
研究了漂粉精母液中有效氯的回用工艺流程，并测试了循环次数对漂粉精有效氯含量的影响。
The effects of mesh number of standard sieve on effective chlorine content of calcium hypochlorite were tested.
并研究了催化剂种类、用量、 重复使用次数对收率的影响及催化剂种类对反应温度的影响。
The influences of catalysts, amount of catalyst , catalyst recovered on syntheis were investigated by orthogonal design.
分析了壳聚糖分子量、浓度、柠檬酸用量和洗涤次数对整理织物折皱回复角和抗菌性能的影响。
The influence of molecular weight and concentration of chitosan, dosage of citric acid and times of laundering to crease recovery Angle and antibacterial property was analyzed.
分析了生氰糖苷的作用机理，研究了溶剂系统、加水量、浸提温度和浸提次数对脱毒效果的影响。
The functional mechanism of cyanogenic glucoside was analyzed, and the solvent system, additional quantity of water, extraction temperature and extraction times were investigated.
利用等通道转角挤压(ECAP)技术挤压工业纯铝l2，探讨了挤压次数对其力学性能的影响。
The effect of ECAP passes on materials mechanical properties of industrial pure aluminum L2 was investigated with equal channel angular pressing (ECAP) process.
目的探讨常见载体上的微量血痕dna的提取方法、PCR循环次数对STR扩增成功率的影响。
Objective To study the influence of different DNA extraction methods combined different PCR cycle Numbers on STR analysis from trace bloodstain on various carrier often seen in forensic area.
为选择该地区最适宜的刈割期、刈割次数和放牧强度以及放牧次数对群落结构的影响提供理论依据。
It provided a base for selecting proper mowing periods and times, grazing intensity and times to affect community, s structure.
研究表明：在测定条件一致的情况下，酶制剂浸提倍数、稀释倍数、浸提次数对酶活测定结果均有显著影响。
The result showed that in case assay conditions were identical, the soak multiple, dilution multiple and soaking times of crude xylanase all influenced the activity of the xylanase.
本文的目的是研究一些典型的NURBS曲面的几何连续条件，指出节点向量和曲面片的次数对几何连续性的影响。
The aims of this thesis are researching some typical NURBS surfaces' geometric continuous conditions and pointing out the effects of knot vector and the degree of surface on geometric continuities.
应用推荐