建议不要使用橡胶表面或机械法兰。
微波辐照下，用聚硅氧烷对天然橡胶表面进行了处理。
The surface modification of natural rubber (NR) was carried out by grafting polyorganosiloxane under microwave irradiation.
并探讨了物理气相沉积涂层法对泡沫橡胶表面进行处理的可行性。
The feasibility of the foam rubber surface processing by physical vapor deposit coating was discussed.
它是一种可以防止外部的橡胶表面破裂、氧化甚至更加恶化的一种材料。
Antiozonant is an ingredient that helps to prevent the exterior rubber surface from cracking, checking, oxidizing, and deteriorating.
因此，有必要研究用一种新的工艺方法来对消声瓦橡胶表面进行改性处理。
So, we have to find a new effective method to modify surface of anechoic tiles.
应用SEM、XPS等技术研究了加速气候老化对乙丙橡胶表面结构的影响。
Through accelerated weather aging, surface structural changes of EPDM rubber were investigated by XPS and SEM techniques in this paper.
通过X射线光电子能谱分析和接触角测定，研究了处理前后泡沫橡胶表面性质的变化。
The property changes of foam rubber surface before and after the treatment were studied by XPS and contact Angle measurement.
研究了改性后胶膜的耐溶剂性能，通过扫描电镜研究了天然橡胶表面改性后的表面结构。
The solvent resistance of modified NR was studied and the microstructure was investigated by using scanning electron microscope.
并采用傅立叶变换红外光谱分析仪（FTIR）分析了局部放电引起的硅橡胶表面结构的变化。
And the change of silicone rubber surface structure by the Fourier Transform Infrared Spectroscopy (FTIR) is analyzed.
同时旭化成工业公司还开发了非粘着化技术，大幅度地降低了氟橡胶表面的粘着性，提高模压成型时制品的成功率。
Co. has developed the "Non-adhesion technology" too. There has been a big reduce in the adhesion of the fluororubber surface, and the rate of finished products has bee improved int...
同时旭化成工业公司还开发了非粘着化技术，大幅度地降低了氟橡胶表面的粘着性，提高模压成型时制品的成功率。
Co. has developed the "Non-adhesion technology" too. There has been a big reduce in the adhesion of the fluororubber surface, and the rate of finished products has bee improved in the mou...
为了使安装容易些，可以将所有法兰螺栓穿过阀门法兰，然后穿过套管法兰，但是不要让螺栓超过法兰橡胶表面(参阅图4)。
For ease of installation, insert all flange bolts through the valve flange and then through the sleeve flange, but do not let the bolts extend beyond the surface of the flange rubber (See Figure 4).
这一过程削弱了(手套内侧)天然橡胶表面的粘着性，(也因为其能)使得手套能在手上滑脱而不是粘在皮肤上，能易于穿戴。
This process reduces the surface tackiness of the natural rubber latex, making the gloves easier to don because they slide over hands without sticking to the skin.
采用折射率高的薄波片作为芯层材料、折射率低的透明硅橡胶作为包层材料，利用软刻印方法将信息复制在硅橡胶表面，制作出10层光卡。
The WMOC ROM a low-index and transparent silicon rubber as the cladding layer material, and takes the advantage of soft lithography method to copy information to its surface at the same time.
与此同时，普林斯顿大学[8]的西格·瓦格纳(Sigurd Wagner)也研制出一种有机光学设备，这其中包含在一个柔性橡胶表面的一个有机激光器。
At Princeton University, meanwhile, Sigurd Wagner has also developed organic optical devices, including an organic laser on a stretchable rubber surface.
他们目前要将其改造和扩大。比如更换表面覆盖物，把橡胶换成瓷砖；改进结构布局以产生更多的能量。
They have recently improved and expanded the system by changing the floor covering from rubber to stone tiles, and have improved the layout of the mechanisms to improve energy generation.
这些橡胶材料制作的随手贴可以贴在各种表面上，这样的话，你就可以拿起你的淋浴头，把它安放在你想要的地方，随手贴。
Designed by Sun-ah Sin, these stickers are made from a rubbery material that will stick to any surface.
气瓶带橡胶底衬，保护气瓶表面免受损伤。
Cylinder with rubber backing, protect the cylinder surface from damage.
印刷版面准备用作印刷表面的一片金属，塑料，橡胶，纸板或其它材料，例如电版或铅版。
A sheet of metal, plastic, rubber, paperboard, or other material prepared for use as a printing surface, such as an electrotype or a stereotype.
跑道区的表面铺设了弹性的橡胶，一般最多设有10根跑道，每根跑道宽1米。
The track area is an elastic rubberized surface containing up to 10 lanes each just over one meter wide.
竞技鱼眼上座，是在强化橡胶上座的再一次升级，表面硬质加工处理，不易产生声响。
A. Athletic Fish-Eye seat Base is the upgrade of enhanced rubber seat with superficial flinty processing, non-loudness.
使用石膏刀或橡胶刮刀布斯涂层表面干燥。
The use of plaster knife or rubber scraper coating drying booth.
随后分析了橡胶模具的加工技术、选用材质、表面处理、模具污染及模具清洗等情况。
Afterwards analyzed the rubber mold machining technology, selected material quality, surface treatment, mold pollution and mold clean situation and so on.
煤炭资源的废弃物多为无机材料，对其表面改性以增强其与橡胶的相容性就显得极其重要。
The coal resource wastes are mostly inorganic material, it is very important to modify filler surface to enhance the compatibility with rubber.
以七台河矿区煤矸石为原料，通过改性药剂选择试验和橡胶填充试验筛选最佳表面改性剂。
Using coal gangue of Qitaihe as raw material, the best surface medication agent was screened through the test of medication choosing and rubber filling.
以七台河矿区煤矸石为原料，通过改性药剂选择试验和橡胶填充试验筛选最佳表面改性剂。
Using coal gangue of Qitaihe as raw material, the best surface medication agent was screened through the test of medication choosing and rubber filling.
应用推荐