分析了汽车驱动齿轮的冷模锻工艺。
The cold forging process of the driving gear for automobiles was analyzed.
分析了汽车行星齿轮的冷模锻工艺。
This paper analysed the cold die forging technology of automotive epicyclic gears.
叙述了磁极新旧模锻工艺过程。
The technological process of the new and old die forging for the pole was described.
叙述了差动伞齿轮新旧模锻工艺过程。
The technological process of the new and old die forging for the differential bevel gear was described.
提出了采用模锻工艺成形铁路货车支撑座的方法。
The method to form supporting pedestal of railroad lorry by die forging was proposed.
本文总结了螺旋压力机模锻工艺技术的主要适用范围。
The main application range of die forging process on screw press are summarized.
结果表明,闭式精密模锻工艺的新方法是十分有效的。
The results have shown that the new way of precision die forging is very efficient.
分析了模具的结构特点;确定了合理的液态模锻工艺参数。
Structural features of die are analyzed and reasonable technological parameters for liquid forging are determined.
通过有限元模拟对磁极精密模锻工艺参数和模具结构进行了研究。
The process parameters and mould structure for precision alternator pole forging are researched through FEM simulation.
最后,给出带盲孔的轴对称锻件的闭式模锻工艺设计的一般性指针。
At the end, some general instructions for the process design of flash die forging of axisymmetric gear blanks with blind hole were suggested.
而且,对于闭式模锻工艺而言,坯料尺寸直接影响模锻工艺的顺利进行。
And as for the closed die forging, billet size will affect the process directly.
本文研究了不同热模锻工艺参数对GH4169合金锻件组织性能的影响。
The article researches the effect of different hot die forging process parameters on forgings structure and properties of GH4169 alloy.
介绍安装盘几种加工方法的优缺点,通过比较说明液态模锻工艺的可行性。
This article explains the advantages and disadvantages of some possible methods for processing flanges. By comparing these methods, it shows that liquid forging process is feasible.
叙述了羊角锤新旧模锻工艺过程,介绍了活动模具的动作原理及模具结构。
Described the technological process of the new and the old forging die for the claw hammer, introduced the working principle of the movable die and die structure.
滑动叉传统上采用开式模锻工艺生产,飞边大,材料浪费严重而且尺寸精度差。
In conventional closed-die forging of slide forks, the material waste of the flash is serious and the geometrical tolerance is large.
分析了粉末烧结材料镦粗和复压工艺的致密效果,提出了闭式模锻工艺设计原则。
The densification effects of upsetting and repressing are compared, and a technology design principle for closed die forging is suggested .
介绍了钛合金斜盘模锻工艺流程、热处理规范以及工艺要求,并进行工艺试制和应用。
The Titanium alloy swashplate's pressure forging process, heat treatment criterion and process request are introduced and trial-manufactured.
叙述了闭式模锻工艺的实质、特点、方式及模具型式,列举了典型的闭式模具结构图。
The article has described substance, characteristic, methods and die types of flasless die forging technology, and it has list the typical die construction figures of flasless die forging.
通过镦粗工艺试验,确定了该材料的热变形工艺参数,并对其进行了等温模锻工艺研究。
The technological parameter of heat deformation was confirmed by the test of Upsetting technology, and the isothermal stamping was studied.
连皮厚度是开式模锻工艺参数中的一个重要参量,它对模锻变形力和材料的消耗有很大的影响。
Web thickness is one of the important parameters in Closed-die forging process, which has an effect on forming force of die forging and material consumption.
本文介绍了在模锻工艺中实现局部加载的方法,编制了计算局部加载时模腔充填效率的电算程序。
The method of applying local loading to die forging was introduced in this paper. And a program for calculating the die filling efficiency was developed.
试验和生产结果表明,对于锥形起重电机定子壳的生产,液态金属模锻工艺比压力铸造工艺更合理。
It has been proved by the results of experiment and production that molten metal forging is more advanced and reasonable than pressure casting for the production of crane motor stator shell.
将这些定量对应关系应用于工程设计,能有效地解决开式模锻工艺与模具设计中的主要参数优化问题。
If these are applied to engineering design, they will solve the problem of how to optimize these main parameters.
并从判断模锻工艺方案优劣的多个因素中选择飞边金属消耗作为目标函数,在实验中实测该目标函数值。
The paper chooses flash metal consumption as object function from a lot of factors from which we can judge which of them is better, and measures the object function values in the tests.
辊锻过程中金属变形及流动,与一般模锻工艺相比存在较大的差异,因而其工艺设计及初成形道次模具、整形模具设计也不同于常规模锻工艺。
The deformation and flow of metal in the process of roll forging are much different from those of ordinary die forging, So are the design of its technology, preliminary forming dies and dressing dies.
针对大吨位离合器式螺旋压力机(主要指吨位在25MN以上的压力机)的开发前景及应用情况,作出了一些具体分析,以推动该类设备在模锻工艺上的广泛应用。
Specific analysis of developing prospect and application of clutch type spiral press with heavy duty (25mn or more) has been done to promote application spread in die forging process.
阐述了用冷锻工艺代替热模锻的优点。
It has elaborated the advantages replacing hot die forging with the cold forging technology.
阐述了用闭式挤锻工艺代替开式模锻的优点。文末提出了模具设计的基本要求。
It has elaborated the advantages replacing closed-die forging with closed extrusion-die forging.
阐述了用闭式挤锻工艺代替开式模锻的优点。文末提出了模具设计的基本要求。
It has elaborated the advantages replacing closed-die forging with closed extrusion-die forging.
应用推荐