铸造沙铸，压铸，融模铸造。
模铸和挤压材料。金属模部件。定位销。
Material of moulding and extrusion . metal mould components . location pins.
这又产生具有非常低的微孔隙缺陷的最终模铸产品。
This, in turn, creates a finished die cast product with extremely low levels of microporosity defects.
模铸转连铸后，减轻了成分偏析，提高了钢的韧性。
After changing from mould casting into continuous casting, the composition segregation decreases and the toughness steel increases.
(调整)模铸在阀体的外部，表示用于组装的开口端口。
ADJ externally molded onto the body to indicate the open end used for assembly.
通过水力学模拟实验，优化了模铸连浇中间包控流装置。
The flow control devices of tundish for ingot casting has been optimized through hydraulics simulated experiment.
这些合金用于定位焊接和铜焊的焊料，和用做打磨或模铸。
These alloys are used for welding and brazing filler materials and for sand and die castings.
流向模铸在阀体的外部，表示配置TFE阀座的固定端口。
FLOW externally molded onto the body to indicate the fixed end containing a TFE seat.
采用计算机最优化技术结合实验方法研制了模铸硅钢用保护渣。
Some new kinds of protecting slag for casting of silicon steel are developed by means of computer optimizing technology combined with testing.
采用消失模铸造工艺，经准铸态贝氏体工艺处理后，得到了贝氏体组织。
By controlling knock-out time, bainite structure was obtained in the as-cast low-carbon ductile iron cast with EPC process.
手柄顶部模铸的箭头指示旋转方向，使得操作人员容易在90o角内操作。
And molded-in arrows on top of the handle dictate rotational direction to personnel for easy operation within 90o stops.
手柄上模铸的箭头表示旋转方向，方便操作人员在90o角度范围内进行操作。
And molded-in arrows on top of the handle dictate rotational direction to personnel for easy operation within 90o stops.
一种铝硅模铸合金，具有非常低的铁含量和相对较高的锶含量，用来防止在模铸过程中焊接在模具上。
An aluminum silicon die cast alloy having a very low iron content and relatively high strontium content that prevents soldering to dies into die casting process.
完成了连铸和模铸LZ50车轴钢疲劳裂纹扩展试验，得到了两类LZ50车轴钢的疲劳裂纹扩展曲线。
The fatigue crack propagation testing were completed for CT specimens of LZ50 axle steels with continuous casting and mould casting.
大约有一半的铸铝工艺是高压模铸(HPDC)，在这种工艺中，通过压力将液态铝合金注入钢模，或模具。
About half of all aluminium castings are made using high-pressure die-casting (HPDC), in which a molten aluminium alloy is injected under pressure into a steel mould, or die.
使用膨胀型复合模铸保护渣保护浇注钢锭，普遍存在的一个问题是容易使钢锭产生头部积渣这一表面缺陷。
A general problem in protecting the casting ingots by using expanded complex mould casting mold powder is the surface defect that slag deposition can be evolved easily in ingots head.
因此国外厂家对超高压交联聚乙烯电缆如果采用“挤塑模铸法”，目前均采取“分层次挤塑硫化”工艺方式。
Therefore, if the foreign plants adopt plastic extrusion molding for over-voltage crosslinked polythene cable, they currently adopt "plastic extrusion sulfuration by layers" method.
吸收别人的东西并不坏，但必须排除对你可能有的坏影响或无用的部分，同时转变及模铸好的部分，变成自己的。
It is not bad to learn from others, but you must remove the parts which are useless or may have bad effects on you; while change and forge good parts and make them into your own.
目前在攀长钢，不合理的LF精炼工艺已经成为制约“电弧炉—LF炉—（VD/VOD炉）—连铸或模铸”高效炼钢的瓶颈。
Nowadays in Changcheng Steelworks, the unreasonable LF process has become the bottleneck for high speed steelmaking of "EAF-LF-(VD/VOD)-CC/ingot casting".
比较研究了薄板坯连铸用二孔型水口和四孔型水口流场特征，水模试验结果表明，采用两种水口的薄板坯结晶器流场均存在非稳定性现象。
The characteristics of fluid flow in the mould of two ports SEN and four ports SEN have been compared and the influences of SEN on the level fluctuation are investigated by water modeling experiment.
导向器类零件分体式精铸的关键技术之一是切分得到蜡模模具设计的内、外环及叶片单元体即如何实现分割面的生成。
One of the key-technologies of guiding device investment casting is getting internal ring, external ring and blade unit by splitting integral guiding device part for wax-mold design.
铸造方法包括熔模静铸及熔模离心铸造。
The casting methods include investment static casting and centrifugal casting.
通过水模试验研究了涡流控流槽对连铸中间包流体流动的影响。
The influence of eddying flow control trough on flowing liquid in tundish is researched through water simulating test.
采用水模实验以及电脑影像技术，对连铸结晶器内钢液弯月面进行了模拟研究，对不同工艺条件下的钢液弯月面进行了数值模拟。
The simulation study for crescent-moon surface of molten steel in mold is conducted with water simulating experiment and computer video according to different process conditions.
介绍了用硅橡胶和聚氯乙烯两种材料制作工艺品及精铸蜡模的可剥软模具的制作方法及其实际应用。
This paper introduces the making method of the strippable soft dies of handiworks and precision casting wax patterns which are made of the silicic rubber and PVC and its practical application.
使用高速摄像仪采集了板坯连铸结晶器水模内气泡运动的图像，对图像进行了数字处理。
Images of bubble movement in a water model of slab continuous casting mold were acquired by a high speed video camera and processed by image processing software.
为减少不锈钢连铸坯中夹杂物的数量，开展了不锈钢板坯连铸中包水模实验。
In order to reduce the inclusion quantity in the stainless steel slab, water-modeling experiment of stainless steel slab continuous casting tundish is launched.
试验结果表明：铸渗硼灰铸铁钢锭模比同类灰铸铁钢锭模的使用寿命提高43％。
The service life of the boron surface alloying grey cast iron ingot mold is 43% longer than that of high Mn low si grey cast iron ingot mold.
试验结果表明：铸渗硼灰铸铁钢锭模比同类灰铸铁钢锭模的使用寿命提高43％。
The service life of the boron surface alloying grey cast iron ingot mold is 43% longer than that of high Mn low si grey cast iron ingot mold.
应用推荐