塑模钢的正确使用是提高塑料模具质量的关键。
The creat usage of plastic mold used steel is the key technology to improve the quality of plastic mold.
钢种有：冷模钢、热模钢、塑模钢、粉末高速钢等无方向性特钢，同时经销上海五钢特种模具钢。
Steel are: cold-steel, hot-steel, Mold steel, high-speed steel powder and other non-directional special steel, special steel distribution Shanghai Five die steel.
研究了1.2311塑模钢扁钢尺寸、终轧温度、回火温度等主要工艺参数对其轧后硬度、回火硬度及组织均匀性的影响。
The influence of processing parameters, such as finishing rolling and temper temperatures, on the hardness and microstructure of 1.2311 plastic die flat steel were studied.
大约有一半的铸铝工艺是高压模铸(HPDC)，在这种工艺中，通过压力将液态铝合金注入钢模，或模具。
About half of all aluminium castings are made using high-pressure die-casting (HPDC), in which a molten aluminium alloy is injected under pressure into a steel mould, or die.
而沸腾钢从冶炼直至钢模中、韧性、硅铁或铝来脱氧。
The boiling steel from smelting until the steel mold, toughness, ferrosilicon or aluminum deoxidation.
直接利用激光快速成型的原型树脂模，结合陶瓷型精密铸造技术，制得了高精度、低表面粗糙度、高使用寿命的钢模具。
The steel dies with high dimensional accuracy, low surface roughness and long service life have been quickly produced by using prototyping resin molds as patterns of ceramic investment casting.
同时，更新我们所有的挤出(31一钢模)的生产状态。
Also, update us the production status of all the extrusions (31 dies).
工具钢的一些应用有钻头、深压模、底刃、冲床、挤出模及切割刀具等。
Some applications of tool steels include drills, deep drawing dies, shear blades, punches, extrusion dies, and cutting tools.
主要的铸锭设备有盛钢桶和钢锭模。盛钢桶是用来盛装从炼钢炉放出的钢液的容器。
The major equipments are the ladle and the mould. a ladle is a container to hold the molten steel tapped from the steel making furnace.
一些汽车在火焰，和23个人破坏性的碰撞一钢模中被卷入。
Several cars are engulfed in flames, and 23 people die in the devastating collision.
我们是专门供应塑胶钢模的绩优厂商。
另一是用钢模比拟法对扁挤压筒预紧装配过程进行模拟，获得了挤压筒内孔型腔变形规律。
On the other hand, simulate the interference fitting process to get the deformation distribution of the mould cavity by steel mould correlation method.
这是小男孩的包裹不一钢模。
以聚氨酯橡胶代替通常钢模中的凹模或凸模是比较有效的方法之一。
It's one of best methods to use polyurethane rubber rather than usual cavity or core in steel die.
所以，在钢锭模内析出的气体没有沸腾钢多，但又在钢锭头产形成足够的气泡抵消大部分钢的收缩。
So less gas is. given off in the mould than with rimming steel, but enough bubbles form at the top of the ingot to counteract most of the shrinkage.
钢液在模内不受搅动平稳上升。
以硅橡胶材料制作的芯模与钢模组合使用制备碳纤维复合材料制件，应用效果较好。
The core mold made of thermal expansion silicon rubber is used with steel mold to mold CF composite products with good result.
在庙宫水库排沙洞的衬砌施工中使用了针梁式混凝土衬砌钢模台车。
We have used needle beam telescoping steel form in the Mao-Gong reservoir sediment tunnel in the concrete lining.
采用水模实验以及电脑影像技术，对连铸结晶器内钢液弯月面进行了模拟研究，对不同工艺条件下的钢液弯月面进行了数值模拟。
The simulation study for crescent-moon surface of molten steel in mold is conducted with water simulating experiment and computer video according to different process conditions.
结构：辊模由钢筒芯构成，即便覆盖有互交式青铜和塑料模，也能避免各种弯曲变形。
Structure: by the cylinder roller mode, even is the core of bronze and mutual into plastic mould, also can avoid all sorts of bending deformation.
管片钢模是盾构管片生产的关键性因素。
Steel moulds are vital for the production of the segments of shield tunnels.
主要介绍了不锈钢球形响壶盖的落料、拉伸、挤边复合模的详细结构、模具工作过程、工艺分析。
Mainly introduced the detailed structure and working process and the technology analysis of the blanking-drawing-extruding compound die for the stainless steel whistle pot cover.
本文对不同轴长比和不同瓣数的不锈钢扁球壳体进行了整体无模胀形成形实验研究及理论探讨。
Experiments and theoretical analysis are made for the integral hydro-bulge forming technology of oblate spheroidic shells of various axial length ratios and petal Numbers.
介绍了一种无模拉伸不锈钢热电偶套管的成型方法及生产工艺。
Described in the article are the formation technique and manufacturing process of non die drawing of thermal coupling casing.
主要的铸锭设备有盛钢桶和钢锭模。盛钢桶是用来盛装从炼钢炉放出的钢液的容器。
The major equipments are the ladle and the mould. a ladle is. a container to hold the molten steel tapped from the steel making furnace.
完成了连铸和模铸LZ50车轴钢疲劳裂纹扩展试验，得到了两类LZ50车轴钢的疲劳裂纹扩展曲线。
The fatigue crack propagation testing were completed for CT specimens of LZ50 axle steels with continuous casting and mould casting.
模头加热：功率约3.5千瓦，热电偶数显温度控制器，不锈钢加热器。
Head heating: Power about 3.5kw, thermocouple and digital displayer temperature controller, stainless heater.
模头加热：功率约3.5千瓦，热电偶数显温度控制器，不锈钢加热器。
Head heating: Power about 3.5kw, thermocouple and digital displayer temperature controller, stainless heater.
应用推荐