现在你大概能够看出我真正需要的其实是汽泡纸的杨氏模量而非一张纸的弹性系数。
Maybe you can see that what I really need is Young's modulus for bubble wrap and not the spring constant of an individual sheet.
我已经知道了汽泡纸的杨氏模量，因此通过以下表达式我可以计算出它的弹性系数。
I know Young 'modulus for the bubble wrap, so I can find the spring constant as.
为了研究弹性模量对边坡安全系数和滑动面的影响，建立均质土坡数值模型，在不同工况下(无锚和有锚)，分别改变弹性模量，分析它与安全系数和滑动面的关系。
In order to study the effect of elastic modulus e, to the safety factor and slip plane of slope, a numerical model is founded in plane strain mode for homogeneous soil slope.
本文通过对灰砂砖及灰砂砖砌体的较系统的试验研究，得出了灰砂砖砌体的抗压强度、抗剪强度、弹性模量、泊桑比系数、含水率、吸水率及软化系数等。
This paper has arrived at the compressive strength, shear strength, modulus of elasticity, poisson's ratio, moisture content, water absorption and softening factor of lime-sand brick masonry.
饱和砂岩中扎隙液体的粘滞系数对饱和砂岩的衰减、模量和速度色散的影响在较低频段是明显的。
The viscosity coefficient of pore fluid in saturated sandstone has an obvious effect on the attenuation, modulus, and velocity dispersion in low frequency range.
研究表明：粉煤灰通过改变胶凝材料体系水化速度、徐变系数、弹性模量，可以有效抑制早期混凝土的自收缩。
The research shows that fly ash could restrain early autogenous shrinkage by changing the parameter of binder, such as hydrated velocity, creep coefficient, elastic modulus and so on.
随着裂隙摩擦系数的增加，变形模量有逐渐增加的趋势。
The deformation moduli increase with increment of crack friction coefficient and decrease with increment of crack density parameter.
在杨氏模量、金属线胀系数实验中，微小形变量的测量是关键环节。
The measurement of micro deformation is the key in Youn Modulus and linear expansion coefficient experiments.
本文介绍高速输送带弹性振动的基本公式，阐述我国目前常用几种输送带的圆柱刚度和杨氏弹性模量等振动系数的计算法。
This paper introduces basic formulas of elastic vibration of conveyor belt and the calculation of its vibration coefficients e. g. cylindrical rigidity and modulus of elasticity.
应变式负荷传感器额定输出温度影响是由于弹性体弹性模量的温度系数引起的。
The temperature coefficient of modulus of elasticity of sensing element material result in temperature effect on rated output of strain gauge load cell.
本文提出了一个计算单向纤维增强复合材料横向弹性模量和泊松系数的边界元计算模型。
This paper proposes a BEM computation model to calculate the transverse effective moduli and Poisson's ratios of unidirectional fiber reinforced composites.
具有耐高温、耐腐蚀、耐热冲击、低导热系数、高电绝缘强度和高弹性模量等特性。
With a high temperature, corrosion resistance, heat shock, low thermal conductivity, high electric insulating strength and high elastic modulus properties.
第一非简谐系数的存在使弹性模量增大。
The first order non-simple harmonic coefficient enhances modulus.
根据热力学近似理论，在对体积热膨胀系数和体积弹性模量的乘积进行假设的基础上推导了一个体积热膨胀系数与体积和温度间的关系式。
On the assumption that the product of volume thermal expansivity and bulk modulus based on the thermodynamic approximation theory, a new equation is presented for volume thermal expansion coefficient.
结果表明，绳轮材料的弹性模量和摩擦系数分子分量，对钢丝绳耐磨性能有很大影响。
It shows that the elastic modulus and the molecular component of friction coefficient of the pulley material have great influence on the wear resistance of wire rope.
同时指出流量脉动系数最大的影响因素是油液的弹性模量和油泵的工作压力，其次是柱塞数。
Maximum influencing factors of flow fluctuation coefficient are the elastic modulus of the oil and the working pressure of the pumps, the piston number being a minor factor.
并给出了计算杨氏模量所需的修正系数。
The correction coefficients for the Young's modulus calculation are suggested.
并给出了体变模量、宏观压缩系数和孔隙度之间的关系式。
The relationship between bulk modulus, macro-compressibility and porosity is also given.
随着裂隙密度参数的增加，变形模量有减小的趋势；随着裂隙摩擦系数的增加，变形模量有逐渐增加的趋势。
For the deformation of fractured rock mass, crack density parameter and crack friction coefficient are the most important parameters.
通过解析和数值的方法研究了二维微裂纹体有效模量和有效导电系数之间的关联。
The correlation between of the effective modulus and the effective electrical conductivity for planar materials with microcracks are investigated by numerical and Mori-Tanaka's theoretical methods.
在假定水不可压缩的情况下，利用已有的相关公式推导了单位弹性释水系数与土层压缩模量、变形模量之间的关系。
Given the incompressibility of water, a relation between specific elastic storage, compressibility modulus and deformation modulus was inferred by applying current related formulas.
提出了轮盘进入塑性状态的鉴别方法、在塑性状态下求出割线模量和横向变形系数的方法等。
The method for identification of plastic state of the disk, as well as the approach to obtaining the secant module and transverse deformation coefficient are presented.
饱和砂岩中扎隙液体的粘滞系数对饱和砂岩的衰减、模量和速度色散的影响在较低频段是明显的。
The viscosity coefficient of pore fluid in saturated sandstone has an obvious effect on theattenuation, modulus, and velocity dispersion in low frequency range.
通过分析，薄膜内残余应力可认为是相变系数与弹性模量共同作用的结果。
Analysing the result, we know that the residual stress of the films is affected by both the coefficient of phase transformation and elasticity modulus of films.
试验得到的数据有：应力应变关系曲线、屈服强度、极限强度、弹性模量、延伸率和热膨胀系数。
The test data include the stress? Strain curve, yield strength, tensile strength, Youngs modulus, elongation and expansion coefficient.
摩擦系数主要受纳米管径的影响，还受表面粗糙度和弹性模量的共同影响。
Frictional coefficients were mainly related with nanotube diameters of specimens, next with surface roughness and elastic modulus of specimens.
弹性模量只与第一非简谐系数有关，而与简谐系数和第二非简谐系数无关。
It is also found that the elastic modulus only relates to the first anharmonic coefficient, but has no relation to the simple harmonic coefficient and the second anharmonic coefficient.
裂缝的产生与二者之间的水平阻力系数、温度以及墙体截面尺寸和弹性模量有关。
Consequently the crack on the wall is begot. The crack is concerned with horizontal resistance coefficient, temperature, size of wall section, elastic modulus.
因此，建议采用理想弹塑性模型的强度折减法确定安全系数，采用变模量弹塑性模型强度折减法确定变形场。
It is proposed that the ideal elastoplastic model can be used to determine the safety factor, and the variable modulus elastoplastic model to calculate the deformation field.
因此，建议采用理想弹塑性模型的强度折减法确定安全系数，采用变模量弹塑性模型强度折减法确定变形场。
It is proposed that the ideal elastoplastic model can be used to determine the safety factor, and the variable modulus elastoplastic model to calculate the deformation field.
应用推荐