着重讨论了数字、模拟和数-模混合集成电路宏模型，并指出了尚待解决的问题。
Macromodels for digital, analog and digital-analog integrated circuits are analysed, and some uncertainties are also discussed.
该电源采用数/模混合控制及重复控制方法，数字部分实现高精度的波形发生器和电压有效值控制；
The power supply adopts D/A mixed control and repetitive control. The digital part realizes the high precise waveform generator and the control based on voltage virtual value.
这种混合文档称为多模的或者非单体的。
Such combination documents are called multi-modal or non-monolithic.
导出了关于混合模的耦合边界积分方程组及其退化形式，并用矩量法将之离散为齐次代数方程组，从而得波导的混合模传输常数；
The coupled boundary integral equations and their reduced forms are deduced for hybrid mode problems, and these equations are discreted into a system of linear algebraic equations by moment method.
当固体激光器运转在低阶混合模时，既可得到较高的功率输出，又可保证较好的光束质量。
A solid state laser operated at lower-order mixed mode possesses both advantages of high output power and good beam quality.
我们把这些压成细粉，然后混合在水泥及沙里，之后把它放在一个模盒里，作成混凝土制的产品。
We pulverise these to make it powder-like and we mix it with cement and sand and put it in a mould and turn it into concrete products.
这时，把牛奶加入奶油芝士的混合物里。入模冷藏1小时左右。
Then , pour the hot milk in the mixture . chilling for 1hour.
由此，对这类混合锁模激光器系统的特性作了理论解析。
Based on these results, some characteristics of such a hybrid mode-locked lasers system are interpreted theoretically.
通过设置纹理图层的混合模式的“叠加”，就能将颜色和纹理与白模合并在一起。
By setting the texture layers to "Multiply" in the layer blend mode dropdown, I was able to merge the colors and textures with the shading of the clay model base.
其原因包括在喂料区加热时间太短和在过渡区熔融太慢、混合不良、在机筒和口模中存在过多的热量损失。
Causes include heating too quickly in the feed zone, melting too slowly in the transition zone, insufficient mixing, and excessive heat loss in the adapters or die.
另取一盆，混合面粉，烤粉和盐。把牛油混合物徐徐拌入。然后加入草莓，拌匀后倒入备好的烤模内。
In a separate bowl, combine the flour, baking powder, and salt. Add to the butter mixture gradually. Fold in strawberries. Spoon the batter into the prepared baking pan.
土豆淀粉用于压模成形谷物、小吃、干的混合汤料和糕点。
Potato starch is used in extruded cereal and snack food products and in dry mixes for soups and cakes.
还叙述了模-数混合补偿技术的工作原理，分析了引起拟合误差的因素并推导出计算最大误差的公式。
The principle of the analog-digital composite compensation technique is described and the factors causing fitting errors arc analyzed. The formula for calculating the maximum error is derived.
把混合物倒进胶模内。
算法基于混合模体模型学习，采用贪心策略，通过似然度最大化，逐次将新的模体加入到混合模型中。
Based on mixture motifs model learning through likelihood maximization, a greedy strategy that adds sequentially new motif to a mixture model is employed.
本文针对线性和非线性混合滤波技术的不足，提出了一种基于三角模融合算子的混合滤波算法。
In this paper, a new hybrid filter algorithm based on triangle modulus fusion operator was proposed to overcome the shortcomings of the hybrid linear and nonlinear filter techniques.
研究了多纵模激光束的光学混合技术。
The technique of photo-mixing for multimode laser beam has been studied.
本文介绍了用于机动目标跟踪的自适应混合多模算法。
The paper describes an Adaptive Interacting Multiple-model(AIMM) algorithm for use in manoeuvring target tracking.
本文介绍了具有混合型三模余度结构的设计与实现。
This paper introduces the design and realization of hybrid structure with three modular redundancy.
结合振动沉模防渗墙技术，通过分层模型的振动台试验，研究了混合砂浆防渗料的分层性随振动模型的变化情况，揭示了混合砂浆防渗料的性能指标随振动模型的变化规律。
According to the technology of vibratory sink mold wall, layering characteristic of the preventing seepage material of the composite mortar is studied through the layering vibratory dais model test.
该模腔内注入甲基丙烯酸酯类树脂的单体混合物。
A methacrylic resin monomer mixture is filled in the cavity.
使单体混合物在模腔 内聚合、固化。
The monomer mixture receives polymerization reaction in the cavity for hardening.
本文介绍了燃烧实验室所进行的媒水混合物流化床燃烧过程数学模化工作第一阶段的研究结果——初定模型的基本情况。
The result of the first stage work of mathematically modelling for fluidized bed combustion process of coal water mixture the primary model is reported in this paper.
该雪糕是将包括南瓜粉的配料混合后顺序经过均质、杀菌、冷却、凝冻、灌模、冻结而成。
The ice cream bar is made by homogenizing, sterilizing, cooling, freezing, mold filling and congealing in sequence after mixing the ingredients which include the pumpkin powder.
这种由剪切流动和重力联合作用所引起的混合模，称为流动重力模不稳定性。
This mixing mode caused by a combined role of the sheared flow and gravity is named the Streaming gravity mode Instability "."
计算结果表明：在工作频段内螺旋波纹波导中场结构是一种混合模，以TE21模为主，其群速基本接近常数。
The result indicates that the hybrid mode can be given within work frequencies, in which the main mode is TE21. The value of group velocity of hybrid mode is a constant number.
结合振动沉模防渗墙技术，通过分层模型的振动台试验，研究了混合砂浆防渗料的分层性随振动模型的变化情况，揭示了混合砂浆防渗料的性能指标随振动模型的变化规律。
With the technology of vibratory sink mold wall, the layering characteristic of the preventing seepage material of the composite mortar is studied by the layering vibratory dais model test.
滑模摊铺机工作机构的工艺设计；滑模摊铺机的施工操作以及滑模摊铺混凝土路面混合料的配合比和施工工艺参数的控制上。
At the same time, its application in voiding the collapse and pockmarked face of slipform concrete pavements, the technology design of working mechanism in slipform pavers, the construction ope...
滑模摊铺机工作机构的工艺设计；滑模摊铺机的施工操作以及滑模摊铺混凝土路面混合料的配合比和施工工艺参数的控制上。
At the same time, its application in voiding the collapse and pockmarked face of slipform concrete pavements, the technology design of working mechanism in slipform pavers, the cons...
滑模摊铺机工作机构的工艺设计；滑模摊铺机的施工操作以及滑模摊铺混凝土路面混合料的配合比和施工工艺参数的控制上。
At the same time, its application in voiding the collapse and pockmarked face of slipform concrete pavements, the technology design of working mechanism in slipform pavers, the cons...
应用推荐